







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Summerlin, NV
Vanities, tile and fixtures are the three finish layers that decide how a bathroom looks and how it holds up: the cabinet and counter you touch every morning, the tile that takes the water, and the faucet, shower trim and toilet that have to work quietly for years. If your Summerlin bathroom has a vanity that’s sagging off the wall, grout that’s gone dark at the shower pan, or a builder-grade faucet you’ve already replaced once, this is the work. We’re Bradford Remodeling Co Summerlin, and we run these jobs by The Garrison Standard: a written price before any work starts, background-checked and uniformed technicians, and a 365-Day Done Right Promise behind every install. Call (844) 588-0072 and a live person picks up, day or night.
This page covers the finish work inside a larger remodel. If you’re planning the whole room, start with our Bathroom Remodeling in Summerlin guide, then come back here for the granite, the tile and the fixtures.

Key Takeaways
- Vanity, tile and fixture work in Summerlin typically lands between $4,800 and $18,500 depending on how much gets replaced and which materials you choose.
- We give you a written price before the first tool comes out. No numbers that move at the door.
- Every install is covered by the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge.
- We work from a documented roster of name-brand materials, so the vanities, valves and tile you approve are the ones that get installed.
When You Need Vanities, Tile & Fixtures
Most of the calls we get in Summerlin aren’t cosmetic. They’re the point where a bathroom has started failing in a specific, visible way. Here’s what we see most often.
- Your vanity is pulling away from the wall or the cabinet has swollen at the base. Vanities in Summerlin’s older homes were often set with drywall screws into paper-faced wallboard. Add a decade of moisture and the cabinet starts to move. We replace the unit and re-anchor it to blocking, so it stays put.
- The shower tile is loose, hollow-sounding, or the grout keeps cracking. A hollow tap on tile usually means the thinset let go underneath. That’s a substrate problem, not a grout problem, and painting sealer over it buys you months.
- You’ve got a tub you don’t use and want a walk-in shower. We’re seeing this constantly off the Sun City Summerlin side, where homeowners want a curb-low shower with a bench rather than a tub they haven’t sat in since the house was built.
- Faucets or shower trim drip, or the finish is pitted. Summerlin’s water runs hard, and chrome and brushed nickel show it first at the aerator and the shower valve. If a cartridge has already been replaced once and it’s dripping again, the valve body is usually the culprit.
- You’re replacing a toilet or adding a bidet seat and the rough-in doesn’t match. The rough-in is the distance from the finished back wall to the center of the drain. Get it wrong and the new toilet either sits off the wall or won’t seat. We measure it before ordering anything.
- The floor tile is dated, cracked, or you want to get rid of a step-in tub for aging in place. We pull the old floor to the slab, correct the substrate, and set new tile with proper slope toward the drain.

Our Vanities, Tile & Fixtures Process
Here’s the sequence we run, in the order we run it. This is the same on a $5,000 vanity-and-fixture refresh and on an $18,000 full tear-out.
- Measure and document. We check the rough-in for the toilet, the valve depth behind the shower wall, the vanity footprint, and the substrate under the floor and walls. That last part matters: if the drywall behind the shower is standard gypsum rather than a cement board or a waterproof membrane, we tell you before we touch tile.
- Write the price and the scope. You get a written line-item price before any work begins: vanities, counters, tile, fixtures, demo, haul-away. No allowances that balloon later. This is non-negotiable under The Garrison Standard.
- Order materials against the documented spec. We work from name-brand lines with published specs and manufacturer warranties, so the faucet or the tile we install is traceable to a model number. When we specify a waterproofing system, we’re typically working with Schluter materials for the shower pan and the wall membrane, and Grohe or Kohler for the valve and trim. Those are choices you approve in writing.
- Demo, then correct the substrate. Old tile comes out. We check for soft wood, failed backer board, and any sign of a slow leak. We replace what’s bad before anything new goes down. Tile set over a bad substrate will fail no matter how good the tile is.
- Set the tile and the waterproofing. Shower walls get a proper membrane, a sloped pan, and a flood test before we set a single tile. Floor tile gets the right thinset and a level plane. Grout lines get laid out so the pattern lands on the walls, not broken at the corners.
- Install vanities and fixtures, then close the site. Vanity set and shimmed level, counter dropped and caulked, faucets and shower trim installed and tested, toilet set with a new wax ring. We run water, check for leaks, and walk you through everything. Then you get the signed 365-Day Done Right Promise in your hand and a clean site.
Vanities, Tile & Fixtures Pricing in Summerlin
Here’s the honest range. These are real numbers for Summerlin homes, not “call for a quote” placeholders. Your exact price depends on square footage, material tier, and how much of the existing work has to come out.
| Scope | Typical Range |
|---|---|
| Vanity replacement (single, standard) | $1,200 – $3,400 |
| Double vanity with new counter | $2,800 – $6,500 |
| Shower tile (walls and pan, waterproofed) | $3,500 – $8,200 |
| Floor tile, per square foot installed | $11 – $24 / sq ft |
| Faucet and shower trim, per fixture | $280 – $750 |
| Toilet replacement, set and tested | $320 – $900 |
| Full vanity, tile and fixture package | $4,800 – $18,500 |
What moves the number: the material tier (a porcelain tile is a different cost than a large-format slab), whether the substrate is sound, and how much re-plumbing the fixture swap requires. If the valve behind the wall is a 30-year-old model with no rebuild kit, the fixture cost isn’t the whole story. We tell you that before we quote, not after.
You get a written estimate before any work starts. Free to get, and the price doesn’t change once it’s in writing.
Does Summerlin’s climate affect tile and fixtures?
Yes, and it’s worth explaining. Summerlin sits at real elevation, and the dry desert air does two things to a bathroom. First, it pulls moisture out fast, which is good for drying walls but hard on the gap where tile meets drywall, the caulk and grout there shrink and crack sooner than they would in a coastal climate. Second, our water is hard. Calcium and magnesium leave deposits on chrome and brushed nickel, and they eat at the aerator screens and shower cartridges. We spec ceramic-disc cartridges and finishes that hold up to hard water, and we caulk the wall transitions with a flexible joint, not a grout line. In Summerlin we regularly see shower valve cartridges fail at the four- to six-year mark, well short of the “lifetime” you might expect, because of the water. That’s why fixture brand and model matter on a Summerlin job more than they might in another market.
Why Bradford Remodeling Co Summerlin
Our technicians have up to 22 years of experience, and they’re background-checked and uniformed. Every one of these jobs, from a single vanity swap to a full tile tear-out, gets a written price before work begins and the 365-Day Done Right Promise on the finished install. If the tile fails, the vanity sags, or a fixture we installed stops working inside the guarantee window, we come back and fix it at no charge. That’s the whole promise, stated plainly, and it’s in writing.
Bradford Remodeling is a member of the Garrison Partners family, independently owned and operated and held to The Garrison Standard. Calls are answered by a live person 24/7, not a voicemail or a callback queue. For the full remodel picture, including layout, plumbing, and the rest of the room, see our Bathroom Remodeling page.
FAQs – Vanities, Tile & Fixtures
Can you replace just the vanity without redoing the tile?
Yes, on most jobs. If you’re keeping the existing floor and wall tile, we pull the old vanity, check the wall behind it for water damage, and set the new one against the same footprint. The one caveat: if the new vanity is a different depth or the plumbing is set differently, the tile behind it has to be patched. We tell you which of those you’re in before we order. Call (844) 588-0072 for an exact quote; estimates are free.
How much does a tile shower cost in Summerlin?
A tiled shower with proper waterproofing, walls and pan, typically runs $3,500 to $8,200 in Summerlin. The range comes down to tile size and material, whether the old shower is a tub conversion or a straight re-tile, and whether the substrate is sound. Waterproofing is where we don’t cut corners; a shower built on a bad pan will leak regardless of what tile is on top. Call (844) 588-0072 and we’ll give you a written price for your exact bathroom.
What brands of fixtures and tile do you install?
We work from a documented roster of premium brands so the spec is traceable. On fixtures, that means Grohe, Kohler and Moen, among others. On tile waterproofing, Schluter systems are what we typically specify for the pan and wall membrane. The brand and model you approve in writing is what gets installed, not a substitute chosen at the site.
How long does a vanity, tile and fixture job take?
A vanity-and-fixture swap is usually one to two days. A tile shower with a full re-tile and waterproofing runs five to seven days, mostly because the flood test and the thinset cure times don’t compress. A full package on a small bathroom lands around seven to ten working days. We put the schedule in writing with the price so you know when the crew arrives and when the last tool leaves.
Get Your Written Price
If your Summerlin bathroom needs a new vanity, a tile shower that’s built right, or fixtures that will actually hold up to the water here, call Bradford Remodeling Co Summerlin at (844) 588-0072. A live person answers, day or night. You’ll get a written price before any work starts, background-checked technicians on the job, and the 365-Day Done Right Promise on the install. Free estimate, no pressure, and no numbers that move at the door.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin.


