







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Summerlin Owner’s Guide
Tremron roofing materials are made for the hot, dry, high-desert climate of Summerlin, and most roofing repair jobs involving them land between $400 and $1,800 installed. Roof replacement with Tremron-compatible materials typically runs $8,000 to $20,000 depending on pitch, square footage, and how many layers need to come off. We’re an independent service provider, not affiliated with Tremron, and we install Tremron-compatible roofing across Summerlin.

Most Summerlin homeowners find out something is wrong the same way: a brown water stain spreads across the ceiling after a monsoon, or a windstorm lifts a few field tiles and drops them in the pool. Sometimes it’s quieter. Granules collect in the gutter, or a ridge section starts to look chalky and pale after a summer of 115-degree afternoons. That’s when the phone calls start.
What we do is match the right repair to the actual failure, put the price in writing before anyone touches the roof, and stand behind the result with the 365-Day Done Right Promise: if the repair fails inside a full year, we come back and fix it at no charge.
Key Takeaways
- Tremron roofing repairs in Summerlin: $400 to $1,800 installed, depending on scope.
- Full roof replacement: $8,000 to $20,000, with metal options reaching $15,000 to $40,000.
- Tile-specific repair: $600 to $2,500.
- Every job gets a written price before work begins, no exceptions.
- We work with a documented roster of materials including GAF, CertainTeed, Owens Corning, and James Hardie, plus KraftMaid, Cambria, and Silestone for interior projects.
Which Tremron Models This Applies To

Tremron makes concrete and clay roofing tiles across several profile lines, so the first job is identifying what’s actually on your roof. The model name is usually stamped or embossed on the back of a loose tile or on the underside of a field tile at the eave. If there’s nothing visible, a tape measure does the work: profile height, width across the flat, and overall length pin down the line within a fraction of an inch. Summerlin’s HOA architectural guidelines sometimes specify a Tremron profile by name in your original approval documents, which is worth digging out before you call anyone.
The OEM-versus-aftermarket decision matters more with roof tile than almost any other material. Tremron’s own replacement tiles carry the exact color-through body, the same profile, and a manufacturer warranty that transfers with them. A quality aftermarket match can get you close on color and dimension, but the shading can drift a few degrees, and on a street of identical Summerlin elevations, that drift is visible from the curb. For a handful of tiles, an aftermarket match that reads correctly in daylight is a reasonable call. For a large field where the color needs to run unbroken, order from Tremron directly even if it takes longer to arrive.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Roofing Is Failing
- Cracked or broken field tiles. Thermal cycling is the usual cause, not impact. Summerlin roofs swing from overnight lows near freezing to afternoon highs above 110 degrees, and that daily expansion and contraction stresses the tile body until it hairline-cracks.
- Granule loss or chalky surface. This is surface weathering, and on Tremron concrete tile it typically shows up earlier on south- and west-facing slopes where UV exposure is heaviest. Pale, sandy texture under your hand means the top coat is going.
- Displaced or slipped tiles after wind. The cause is usually a failed fastener or a broken clip at the course above, not the tile itself. Replacing the tile without addressing the attachment is a repair that won’t hold.
- Water staining on ceilings or in the attic. The tile is doing its job and the underlayment beneath it has aged out. Tile roofs have a waterproof membrane under the tile, and that membrane has a shorter lifespan than the tile above it.
- Sagging or soft spots in the deck. This points to moisture that has reached the substrate, meaning the sheathing. It’s the most serious signal on the list and needs eyes on it before another monsoon season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Summerlin, here’s what the numbers look like. Tile roof repair runs $600 to $2,500 depending on how many tiles and how much underlayment needs replacing. General roof repair, including flashing and valley work, runs $400 to $1,800. A full roof replacement runs $8,000 to $20,000, and if you’re moving to metal, $15,000 to $40,000.
What drives the range: square footage, roof pitch, the number of existing layers that need tear-off, and how much fascia or sheathing has to be replaced once we open it up. Tremron tile itself is a material cost line, separate from labor.
Every estimate we write is line-item: materials, labor, tear-off, disposal, and any substrate repair, priced before work starts. There are no change orders that appear mid-job. The written price you sign is the price you pay. All completed work carries the 365-Day Done Right Promise, meaning a full year of written coverage on labor and installation.
DIY or Call Us?
Some things you can check yourself safely from the ground with binoculars: loose tiles, visible cracks, granules in the gutters, and staining on the ceiling inside. Walking a Summerlin roof is where DIY goes wrong. Tile is brittle, the pitch on most two-story elevations is steep, and a slip on a tile roof is a serious injury, not a story. Concrete and clay tile also crack under a footfall, and every cracked tile you create becomes a leak path. We don’t recommend getting up there.
What you can do safely: note the symptoms, photograph the ceiling stain, and call us. Our technicians have up to 22 years of experience on tile and composition roofs, and they’re background-checked and uniformed, so you know who’s on your property. We answer the phone with a live person 24 hours a day. Call (844) 588-0072 and we’ll schedule a free estimate, get eyes on the roof, and put a written price in your hand before anything gets started.
FAQs

Tremron tile is rated for decades of service, but the underlayment beneath it typically needs replacement well before that in Nevada’s climate. In Summerlin, where the UV load is high and the temperature swings are wide, expect the waterproof membrane to be the first thing that needs attention, not the tile surface itself. If you’re seeing ceiling stains and the tiles look fine, the membrane is the likely culprit. Call (844) 588-0072 for an inspection and a written estimate.
Yes, in most cases a single cracked or slipped tile can be swapped individually without touching the surrounding field. The job runs $600 to $2,500 depending on access and how many tiles are involved. If the damage is widespread or the underlayment has failed, a section replacement or full replacement is the more honest answer, and we’ll tell you which one it is. Call (844) 588-0072 to book the estimate.
A single-tile swap can be done in a couple of hours. A larger section repair with underlayment replacement usually takes a full day. We schedule the work, put the scope and price in writing, and don’t leave the site until it’s clean and the paperwork is signed. Call (844) 588-0072 for your written price before work starts.
We identify your Tremron profile from the tile itself, the stamped model, and physical measurements, then source the replacement from Tremron directly when an exact match matters and from documented aftermarket suppliers when it doesn’t. We don’t carry inventory on a truck; every part is ordered to the job, which means it’s the right one. Call (844) 588-0072 to start the process.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












