







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Summerlin Owner’s Guide
Tremron bathroom remodeling in Summerlin typically runs $9,000 – $28,000 installed, with most full baths landing between $12,000 and $20,000 depending on tile area, fixture tier and whether the layout moves. We install Tremron-compatible systems for Summerlin homeowners and usually quote the work within a day of the site visit. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Tremron.

Owners in Summerlin usually find out something’s wrong the same way: a grout line at the shower pan goes dark and won’t dry, a floor tile sounds hollow underfoot near the vanity, or a paver-style wall accent starts shedding a corner after a cold snap. That’s the failure pattern here, and it almost always traces back to what the tile was set on, not the Tremron face itself.
Which Tremron Models This Applies To

Tremron makes both porcelain and paver-style products that find their way into Summerlin bathrooms. The wall and floor tile lines and the stone-look pavers see the most bathroom use, and matching a replacement means knowing which one you’re holding. Pull the original carton label if you can find it: it carries the series name, the color, the nominal size and the caliber. Caliber is the tolerance band, and it’s the number that trips people up. Two boxes stamped different calibers will not lay flat against each other, even in the same color and size.
No label? Measure the actual tile, not the nominal size. A 12×24 porcelain body typically measures slightly under, and grout joint width tells you a lot about what was intended. Photograph the face and the back and bring both to us.
On the OEM vs. aftermarket question: for Tremron bathroom surfaces, the honest answer is that Tremron is the manufacturer here, so what you’re really choosing is original series stock versus a close visual match from another maker. A true series match keeps color, caliber and edge profile consistent across the room. A close match saves money on a small repair but usually shows at the transition. We’ll tell you which one your job actually needs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Bathroom Remodeling Is Failing
- Hollow sound under floor tile. The thin-set or mortar bed has debonded from the substrate. In Summerlin’s dry heat, a slab that wasn’t properly prepped will let tile pop loose within a few seasons.
- Grout that darkens and stays dark. Moisture is getting behind the face through a failed joint or a missing seal at the pan. Left alone, it reaches the substrate and the problem gets expensive.
- Lipped or uneven tile edges. Usually a caliber mismatch or a substrate that moved. It reads as sloppy installation, and it’s often the first visible clue.
- Cracked tile running in a line. Cracks that follow a straight path track a control joint or a structural movement, not an impact. This one needs a substrate look, not a tile swap.
- Efflorescence or white crust at the base. Mineral salts wicking through a wet substrate. It’s a moisture signal, and it’s common around shower pans and tub aprons in Summerlin homes.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Summerlin, with a written price before any work starts:
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: square footage of tile, whether the substrate gets rebuilt, fixture tier, and layout changes that move the rough-in. Materials and labor are broken out line by line. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely do a few things. Photograph the label and the face, measure the tile, press a screwdriver handle against suspect floor tile to listen for hollow spots, and check whether the grout at the pan is soft. Stop there.
Where DIY goes wrong on this work is the substrate. Tile over a wet or unflat base fails no matter how clean the install looks, and correcting it means demolition. Bathroom work also involves the electrical rough-in behind the vanity and the water lines at the shower valve, and those aren’t places to learn. Our technicians have up to 22 years of experience and work background-checked and uniformed. Call (844) 588-0072 for a free estimate.
FAQs

The tile face itself will outlast the installation by decades. Twenty to thirty years is realistic for a properly set floor, but the weak point in Summerlin is the substrate and the grout line, and those are what fail first in our dry, high-swing climate. A well-built bathroom here gets a substrate and waterproofing detail that handles the seasonal movement.
Sometimes, yes. A single lipped tile or a localized grout failure can often be corrected without a full tear-out if the substrate is sound underneath. We test for that before quoting, and we’ll tell you plainly if a patch is throwing money at a bigger problem.
A shower or vanity surface swap usually runs two to four days once materials are on site. A full bathroom remodel runs two to four weeks. The schedule is written into the scope before work begins, along with the price.
We work from a documented brand roster, and we source from manufacturer specs and confirmed product lines, not guesswork. We also work with KraftMaid, Cambria and Silestone where the job calls for cabinetry or solid surfaces alongside the tile. Call (844) 588-0072 for an exact quote; estimates are free.
If your Summerlin bathroom has a Tremron surface that’s failing, the price of finding out what it needs is zero. Call Bradford Remodeling Co Summerlin at (844) 588-0072 for a free estimate. We’ll put the scope, the price and the guarantee in writing before any tool comes out, answer the phone with a live person any hour of the day, and leave the site squared away with your signed 365-Day Done Right Promise in hand.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












