







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Summerlin Owner’s Guide
Therma-Tru does not manufacture roofing, and that distinction matters before you spend a dollar. Therma-Tru builds fiberglass and steel entry doors, patio doors, and the components that seal them – thresholds, sills, weatherstripping, sweeps, and the flashing and trim details where a door head meets a wall or roofline. What homeowners in Summerlin call “Therma-Tru roofing” is almost always the door-to-roof transition: the head flashing, drip cap, and exterior trim around a Therma-Tru door that sits under an eave, a porch roof, or a second-story overhang. Work on that transition is a roofer’s job with a door brand’s parts spec.

Installed, correcting a failed Therma-Tru door-to-roof transition in Summerlin runs $400-$1,800 depending on how much trim and flashing gets replaced and whether the door itself was damaged. Full roof replacement, where that transition is part of the scope, runs $8,000-$20,000. Owners usually find the problem the same way: a water stain on the ceiling inside, bubbling paint on the door head, or a wet threshold after a monsoon push. Call (844) 588-0072 and a live person answers, day or night.
Which Therma-Tru Door Lines This Applies To

Therma-Tru’s residential lines – Fiber-Classic, Smooth-Star, Classic-Craft, and the steel Profiles and Reliabilt-labeled doors – all use the same family of sill and threshold heights, but the exterior trim and head detailing around them varies by how the door was installed. A Fiber-Classic entry door set in a stucco wall on a Summerlin house needs different flashing detail than a Smooth-Star patio door under a covered lanai. The part number you need follows the door, not the roof.
Identify your door before you call: the Therma-Tru label sits on the hinge jamb or the top of the door slab, and it carries the model line and the door slab dimensions. Measure the rough opening width and height, not the slab. Then measure the head flashing width you need – it should extend past the door frame by 2 inches on each side to shed water clear of the jamb. Therma-Tru’s factory flashing and trim components are spec’d to the door line; a generic aluminum drip cap from a big-box aisle will fit, but it won’t match the mill finish or the profile of the original.
The OEM-versus-aftermarket decision comes down to two things: whether the door is under warranty and whether the trim is visible. Therma-Tru’s limited warranty covers the door system, not the roofing detail a contractor wrapped around it, so a quality aftermarket flashing kit from a known manufacturer is a reasonable call when the original profile is discontinued. For visible trim that a buyer will see from the street, source the Therma-Tru-matched component.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Door-to-Roof Transition Is Failing
What fails first, in our experience in Summerlin, is the sealant at the flashing lap and the caulk joint where trim meets stucco. Summerlin summers push 115°F on a south-facing wall, and the elastomeric caulk breaks down in five to seven years on a sun-exposed head, faster than the flashing metal itself ever will.
- Water staining on the ceiling just inside the door. The head flashing isn’t lapping over the trim correctly, so water gets behind the trim and tracks down the wall cavity instead of shedding off the face.
- Paint bubbling or peeling on the door head or upper jamb. Moisture is trapped behind the exterior trim. Bubble at the head means the flashing lap is wrong; bubble at the sill means the threshold pan is holding water.
- Daylight visible at the top corners of the door. The head flashing has pulled away or the trim has shrunk, and the weather seal has lost contact. This one shows up as a draft before it shows up as a leak.
- Staining or mineral crust on the stucco below the door head. Water is running down the wall face instead of off the flashing. In Summerlin’s low-humidity climate the stain dries fast and gets missed for a season or two.
- Wet threshold or wet flooring after a rain. The sill pan or threshold isn’t draining. On a Therma-Tru adjustable sill, the drain slots can clog with stucco dust and windblown grit.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest Summerlin range. A flashing and trim repair at the door head, with new sealant and matched trim, runs $400-$1,800. That’s the Roof Repair band, and it covers the small jobs where the door and the roof are both sound. If the roof above the door has failed and the transition is just the visible symptom, the number moves to $8,000-$20,000 for a roof replacement – tile or shingle, with the door head detailed correctly as part of the scope.
What drives the range: how much stucco gets opened to reach the flashing, whether the trim is a stock profile or a custom mill, and whether the door’s weather seal and threshold need replacement at the same time. Our written price lists the flashing, the trim, the sealant, the labor, and the disposal as separate lines before any work starts. Every completed job carries the 365-Day Done Right Promise – a written guarantee for a full year, and if the repair fails inside that window, we come back and correct it at no charge. Estimates are free.
DIY or Call Us?
You can safely do three things. Look at the ceiling inside the door after a rain for stains. Run a hand along the door head trim and feel for soft wood or loose trim. Check the label on the hinge jamb for the Therma-Tru model line. Write down what you find.
Where DIY goes wrong is the flashing. Re-caulking a failed head flashing without correcting the lap makes the leak worse, because you seal water in behind the trim instead of letting it shed. And on a second-story door or a door under a steep eave, getting up there to work the flashing is fall work – that’s not a ladder job for a homeowner, it’s a trained technician’s job with fall protection. Door and roof components also carry structural loads; a flashing detail that’s under-secured will fail in the first monsoon. If you’ve got water inside, call us at (844) 588-0072 and we’ll look at it with you.
FAQs

Seven to twelve years on the flashing itself, but only five to seven on the sealant joint that laps it, given Summerlin’s UV and heat load. The metal outlives the caulk every time, so the caulk joint is what gets inspected and refreshed first. If your door has been in place longer than that and the sealant has never been redone, it’s due. Call (844) 588-0072 for an inspection and a written price before anyone touches it.
Often, yes – if the metal is sound and only the lap and sealant have failed, a proper repair runs $400-$1,800. Once the flashing metal itself is corroded or the trim behind it is rotted, it gets replaced, because a repair over failing substrate fails again. We open the joint and look before we quote, and the written price tells you which one we found.
Most door-head flashing and trim repairs are a one-day job once the right parts are on site. When stucco has to be patched and re-finished to match, plan on a second day for the patch to cure. We tell you the schedule in writing with the price so nothing moves on you.
We match the part to the door model line off the jamb label you read to us first. Therma-Tru’s factory components and matched trim come through the brand’s dealer network, and we confirm the profile and dimensions against your model before we order – that’s the step most no-shows skip, and it’s why they come back with the wrong part. While we’re on the job we also work with KraftMaid, Cambria, and Silestone cabinetry and surfaces, so the interior side of a door replacement stays consistent. We’re an independent service provider, not affiliated with Therma-Tru.
The Garrison Standard is why every Bradford Remodeling Co Summerlin job starts with a written price and ends with a signed guarantee in your hand: free estimate, no number that moves at the door, and background-checked, uniformed technicians who show up when we said they would. If a Therma-Tru door under our roof detail fails in the first year, we come back and fix it. Call (844) 588-0072 – a live person answers 24/7 – and we’ll get you a free estimate on your Summerlin repair.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












