







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Summerlin Owner’s Guide
If you’re adding a room or an ADU to a Summerlin home with Therma-Tru doors in the existing envelope, expect to spend $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached or attached ADU, depending on size, foundation, and how much of the existing wall has to come out. The Therma-Tru piece usually enters the conversation late: your existing entry or patio door has to be reused, relocated, or matched in the new wall, and that’s when a sagging slab, a cracked sidelite, or a failing hinge set surfaces. Most owners find out because the door stops latching square after framing moves, the threshold starts letting in monsoon dust, or the finish on a west-facing slab starts chalking within a few seasons.

Which Therma-Tru Models This Applies To

Therma-Tru builds for several lines that show up in Summerlin homes: the Fiber-Classic and Smooth-Star slab families, the Classic-Craft series, and the entry systems built around the Therma-Tru sill and frame assemblies. The right replacement part is tied to the door system, not just the brand on the glass. Before we quote a single line item, we pull the sticker on the hinge jamb or the top of the slab. That label lists the model series, handedness, and unit size, and it’s the only reliable way to match a hinge, sill, or sidelite to what’s actually hanging on your wall.
Here’s the gotcha most homeowners miss: a Therma-Tru slab and a Therma-Tru door system are two different things. The slab only tells you the panel; the frame assembly, sill, and hardware set carry their own part numbers and aren’t interchangeable across series. An aftermarket hinge of the same nominal size won’t always square up under the OEM hinge prep, and a non-OEM sill can leave you chasing water intrusion at the threshold. OEM equivalents are worth the small premium when they come with manufacturer spec sheets. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Home Additions & ADU Is Failing
- The door no longer latches square. When an addition or ADU puts new load on the existing wall, the opening racks slightly and the strike plate stops meeting the latch. It usually points to settling under the header, not a bad lock.
- Thresholds take on water during monsoon season. Summerlin’s hard summer rain pushes sideways at the sill; if the weepholes are clogged or the sill flashing was set short, water gets behind the threshold and starts working on the substrate.
- The slab finish chalks or peels on the west elevation. A full afternoon of July sun on a fiberglass slab will bake out a finish that wasn’t prepped right, and once it chalks, it needs refinishing or replacement, not a touch-up.
- Hinges or latch hardware loosen and won’t hold torque. Screw holes strip out in the hinge jamb, and the slab starts dropping. On a Therma-Tru frame this often means the hinge prep itself has worn and needs re-pinning or a new jamb.
- Visible daylight at the corners of the frame. If you can see light between the frame and the rough opening, the seal has failed. That’s a fast track to dust infiltration and eventually to moisture in the framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A Therma-Tru door replacement as part of a Summerlin home addition or ADU runs inside the $45,000 – $130,000 addition range or the $90,000 – $220,000 ADU range, but the door line itself typically lands between $800 and $3,500 depending on whether it’s a slab swap, a full unit, or a sidelite and transom package. What moves the number is size, series, glass upgrade, and whether the frame has to be reworked to square the opening. We give the written price before any work starts and we don’t move it at the door.
That written scope covers the part, the labor, the rough-opening repair, the flashing and sealing, and the finish. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we return and correct it at no charge. Summerlin ADU projects also need to move through HOA architectural review and Clark County permitting, and we pull the permits and see the inspection through.
DIY or Call Us?
You can safely check three things: read the label on the hinge jamb and write down the series and size, confirm the door swings and latches without rubbing, and look for daylight or water stains at the threshold and frame corners. That’s it.
What we don’t recommend: re-pinning hinges, resetting a sill, or pulling a slab out of a racked opening on a load-bearing wall. A door slab that drops mid-removal is heavy, and a re-flashed threshold done wrong will leak into your framing long before you notice. For a home addition or ADU, the door is usually the last thing set and the first thing to reveal a problem upstream. Call (844) 588-0072 and a live person picks up, day or night. We’ll walk you through what to check over the phone and give you a written price before anyone touches the door.
FAQs

A well-installed Therma-Tru fiberglass door in Summerlin generally lasts 15 to 20 years, though the west-facing slab finish and the threshold seal wear far faster than the panel itself. UV exposure on the exposed elevations is the main driver, and a threshold that hasn’t been re-sealed will shorten that window. Call (844) 588-0072 for a free assessment of your existing door.
Yes, in many cases. A door that’s sagging, mis-latching, or leaking at the sill can often be re-squared and re-flashed without a new slab. The decision comes down to whether the hinge prep and the sill are still sound. We’ll tell you straight if a repair is the right call. Call (844) 588-0072 for a free estimate.
A straight slab swap or unit replacement runs a single day, and a full frame rework inside an addition or ADU typically takes two. The longer schedule is the framing and flashing scope, not the door. Your written price and timeline are fixed before work begins. Call (844) 588-0072 to schedule your free estimate.
We source through documented manufacturer channels using the model label from your existing door, and the spec sheet comes with the part. That traceability is why we work with a specified brand roster, and the same standard applies to the other lines we install: KraftMaid, Cambria, and Silestone, among others. Call (844) 588-0072 for a free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












