A Bradford company - serving Summerlin, NV
An open living room and dining area after a whole-home remodel
Tamko · Summerlin

Tamko Windows & Doors in Summerlin, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Summerlin
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Windows & Doors: The Summerlin Owner’s Guide

We install and service Tamko-compatible windows and doors in Summerlin, and most single-unit component repairs – hinges, locks, rollers, weatherstripping, glass – run $150 to $650 installed, with full window replacement at $4,500 to $15,000 and impact-rated units at $8,000 to $25,000. You usually find out something failed one of three ways: a door that won’t latch without a shoulder into it, a window that fogs between the panes after a 110-degree Summerlin afternoon, or a crank that spins free because the operator arm stripped. Tamko is best known for roofing, but the company also made windows and patio doors that landed in a lot of Summerlin homes built through the 1990s and 2000s, and those units are now deep into their service life. We’re an independent service provider, not affiliated with Tamko, and we’ll tell you straight whether the part can be matched or the unit is past saving.

General contractor and client reviewing blueprints at a home renovation site in Summerlin, NV

Call (844) 588-0072

Which Tamko Models This Applies To

A built-in window seat in a bay window

Tamko’s window and door line covered vinyl single-hung, slider, casement, and patio door units sold under series designations rather than one universal model number. The label is your starting point: pull the sash back and look on the jamb or the top of the lower sash for a manufacturer’s sticker with a series code and a date of manufacture. No sticker? Measure the visible glass, the frame width, and the sash thickness to the sixteenth of an inch; those three numbers identify the replacement hardware far more reliably than a model name. The compatibility gotcha that trips up Summerlin owners is the roller and hinge profile: Tamko’s vinyl slider rollers sat in a channel depth that doesn’t match the generic aftermarket rollers sold at box stores, so a “universal” roller will fit loosely, drift, and bind within months.

On the OEM-versus-aftermarket decision, we’re direct about it. For wear parts like rollers, locks, sweep weatherstripping, and screen frames, a quality aftermarket equivalent is often the smarter buy and lasts as long, provided the dimensions are matched exactly. For cranks and operator arms on casement units, and for any glass or insulated unit (IGU) replacement, we source to the original spec because the geometry and the seal have to be right. A wrong-spec operator strips its own track in a season.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Windows & Doors Is Failing

These are the failures we see most in Summerlin, and what’s actually behind each one.

  • Fogging or condensation between the panes. The seal on the insulated glass unit has failed, letting moisture in. Once that happens the glass can’t be dried out and the unit has to be replaced, not cleaned.
  • A door that drags, sticks, or won’t latch. Usually a worn hinge, a settled frame, or a lock that’s out of alignment with its strike. In Summerlin’s heat, vinyl frames expand enough that a door that worked in winter can bind by July.
  • A window crank that spins without moving the sash. The operator arm or the spline has stripped. This is a cheap part with an expensive consequence if ignored, because forcing the sash by hand cracks the hinge track.
  • Drafts, whistling, or visible daylight at the edges. Failed sweep weatherstripping or a worn seal. In Summerlin this shows up as a cooling bill climbing through August rather than a cold draft in winter.
  • A slider that jumps or won’t track straight. A flat-spotted or seized roller, sometimes a bent track. Rolling a bad roller along a good track grinds both.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s how the numbers break down for Summerlin homes. These are installed prices, parts and labor together, not a parts-only figure with labor hidden behind it.

Scope Installed price range
Single component repair (hinge, lock, roller, weatherstripping, crank) $150 – $650
Insulated glass unit (IGU) replacement, per unit $250 – $700
Window replacement, whole-home or multi-unit $4,500 – $15,000
Impact-rated window installation $8,000 – $25,000

What moves the number: the number of units, whether the frame stays or the whole unit comes out, glass spec (standard versus impact-rated), and access. Every Bradford job gets a written, line-item price before any work starts, so the parts figure and the labor figure are both on paper. Our work is covered by the 365-Day Done Right Promise: if a repair or install we did fails within a year, we come back and correct it at no charge.

General contractor and client reviewing blueprints at a home renovation site in Summerlin, NV

DIY or Call Us?

You can safely check the label, measure the glass and frame, clean and lubricate a track, and replace a screen. Those are reasonable homeowner tasks. Where DIY goes wrong on Tamko window and door hardware is in the glass and the frame: prying a sash out to reach a hidden roller or operator can crack the IGU or bend the vinyl track, and a bent track means the whole unit, not just the part. There’s also a genuine safety factor on glass and on upper-floor or large patio door units, since a dropped sash or a mis-set IGU is heavy and unforgiving. We’d rather you check what’s safe to check and let a technician handle the rest. Our technicians have up to 22 years of experience, and they’ll tell you honestly if a $90 part fixes it or if the unit is finished. Call (844) 588-0072 – we answer with a live person, day or night.

FAQs

A wide opening with a new beam where the kitchen wall was removed

How long do Tamko windows and doors last in Summerlin? A well-installed vinyl window or door should give 20 to 30 years, but Summerlin’s heat and low humidity shorten that for anything weather-exposed; the seal on the insulated glass is usually the first thing to go, often around the 15-to-20-year mark, while the frame and hardware can outlast it. Call (844) 588-0072 for a free estimate on repair versus replacement.

Can a failed part be repaired instead of replacing the whole unit? Yes, in most cases a worn hinge, roller, lock, crank, or weatherstrip can be replaced on its own and the unit keeps working. The exception is a failed seal inside the insulated glass; that unit can’t be repaired, only replaced. Call (844) 588-0072 and we’ll tell you which situation you’re in.

How long does a Tamko part swap take? A single hardware swap like a roller, lock, or hinge is typically an hour or so, and a glass unit replacement usually runs a couple of hours once the right part is on site. The variable is sourcing the correctly matched component. Call (844) 588-0072 to schedule your free estimate.

How do you source Tamko-compatible parts? We match by the label code where it’s readable and by measured dimensions where it isn’t, then source to that exact spec rather than forcing a generic part. We don’t claim to stock parts or carry them on a truck, so we confirm the correct part before the crew arrives. We also work with KraftMaid, Cambria, and Silestone on the interior side when a window or door job turns into a larger remodel. Call (844) 588-0072 for an exact quote – estimates are free.

If you’re not sure whether you’re looking at a part or a whole-unit problem, call (844) 588-0072 for a free estimate. Bradford Remodeling Co Summerlin will put the scope and the price in writing before any work starts, send background-checked, uniformed technicians who arrive knowing exactly which Summerlin address and which unit they’re there for, and stand behind the work with the written 365-Day Done Right Promise. We’re part of the Garrison Partners family and held to The Garrison Standard – which is simply this: the price is on paper, the guarantee is in your hand at close, and if the work doesn’t hold, we make it right.

Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted walls

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Summerlin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Summerlin team

A local vetted partner works across Summerlin and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 588-0072
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Bradford Remodeling Co Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch