







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The Summerlin Owner’s Guide
Bathroom remodeling in Summerlin runs $9,000 – $28,000 installed, and a small bath falls in the $5,000 – $12,000 range. When the trouble traces back to a Tamko product inside the room, we match the replacement to your exact model and spec and install it to manufacturer requirements, so the fix holds. Homeowners rarely catch the problem at the start. They notice it after a summer of dry heat and hard water has already done its work: a seal that lets go, a surface that stains, a piece that visibly cracks along an edge.

Tamko is best known in Nevada for roofing, but it makes a range of building and surface products that end up inside bathrooms. If a Tamko-labeled product sits in yours and has started to fail, the repair is a real one, and the price of the whole bathroom scope starts at $9,000 – $28,000. Summerlin’s very dry air and mineral-heavy water are hard on seals and finishes, so we see more of these failures than coastal markets do, and they tend to arrive faster.
Our technicians have up to 22 years of experience with these materials.
Which Tamko Models This Applies To

We treat compatibility as a measuring job, not a guess. Your part has to match on dimensions, profile, and the surface or series it belongs to. Two bathrooms with the same product family can need different pieces because the profile on the brand line differs by generation.
First, find the label. Look for the Tamko name and any model or series code printed on the back face, an edge band, packaging left under the vanity, or the product’s spec sheet if the original owner handed it over. Photograph it before anything is removed. We measure the piece in place and match it to a spec sheet rather than trusting a photo or a single number off a label.
Stay with the OEM part or a quality aftermarket equivalent. The OEM piece fits the original profile and carries the manufacturer’s warranty. A cheaper generic part may measure close and still sit wrong: the edge profile differs, the sealing surface doesn’t land flush, and the failure comes back in a year. We don’t carry stock and we don’t carry parts on a truck, so the correct part is sourced for your model and your bathroom before the crew arrives.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
These are the signals Summerlin owners describe when they call us. Each one points to a specific cause, so the fix isn’t a blind swap.
- A seal line has separated. Dry heat pulls materials away from the surface they sit on, opening a gap that lets water past. Once that line breaks, water gets behind the piece and the failure spreads.
- Staining or discoloration that won’t clean off. Summerlin’s hard water leaves mineral deposits that bond to certain finishes and won’t lift with regular cleaners. When cleaning stops working, the surface or part has passed its usable life.
- Cracks along an edge or seam. Small cracks usually come from movement or a substrate that wasn’t fully secure when installed. They grow through temperature swings and can’t be patched back to full strength.
- Visible bowing or a loose fit. When the piece no longer sits flat against the substrate, the original fastening or glue has given way. Re-tightening only hides it for a while.
- Recurring moisture at the base. If water reappears after wiping, the part isn’t sealing as designed. The cause is usually a worn seal or a piece that no longer meets the surface flush.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Summerlin, a full bathroom remodel that addresses a failed Tamko product runs $9,000 – $28,000. If the room is small and the job is contained, $5,000 – $12,000 covers it. On their own, a walk-in shower install is $4,500 – $12,000, a shower replacement is $3,000 – $8,500, a tub-to-shower conversion is $3,500 – $10,000, and a vanity installation is $800 – $3,000.
What drives the number: how much of the room the failure touched, whether the substrate underneath is sound, and how long the part takes to source for your exact model. Every price is written before any work starts, with parts and labor listed separately so you see what you’re paying for. Our technicians have up to 22 years of experience with these materials. Every completed project carries our 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
Some checks are safe. Photograph the label, measure the piece, note the model code, and clean mineral buildup from around the edges so you can see the actual condition. Those steps tell us what we need to match on day one.
Where owners get in trouble is removal and replacement. Tamko parts often sit behind caulk lines and fasteners that tie into the substrate, and pulling one out the wrong way can damage what’s behind it and turn a single-part fix into a larger repair. Water damage you can’t see becomes visible once the piece comes off. Get a written estimate before anything is removed. Call (844) 588-0072 and a live person answers any hour, not a voicemail queue. We give you a written price and a scope, then you decide.
FAQs

Expect the original service life to be shortened by Summerlin’s climate. Dry air and hard water work on seals and finishes faster than in wetter, softer-water regions, so a product that lasts many years elsewhere often shows failure here sooner. The fix isn’t the same for every part, so we inspect before quoting. Call (844) 588-0072 for a free estimate.
Sometimes, if the failure is a seal or a fastener and the core still measures true. If the piece is cracked, bowed, or stained past its finish, a repair won’t hold and replacement is the honest call. We tell you which one you’re facing before any work begins, with the price in writing. Call (844) 588-0072 for a free estimate.
A single-part replacement is a contained job measured in hours, not weeks, once the correct part is sourced for your model. The bathroom remodel timeline depends on how much of the room the failure touched. We give you a written schedule and a fixed price before the crew starts. Call (844) 588-0072 for a free estimate.
We match it from your model code, measurements, and photos against the manufacturer spec sheet, then order the OEM part or a quality equivalent. We don’t keep stock and we don’t keep parts on a truck. If a part is unavailable, we tell you up front and lay out the compatible options. Call (844) 588-0072 for a free estimate.
Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Tamko. We also work with KraftMaid, Cambria, and Silestone fixtures and cabinetry when the bathroom project calls for them. When a crew is done, the site is clean, the scope is documented, and you hold a signed written guarantee in your hand. To get a written price for your Summerlin bathroom, call (844) 588-0072 and schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












