







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Kitchen Remodeling: The Summerlin Owner’s Guide
We install and replace Sterling-compatible kitchen components and full kitchens in Summerlin, and a typical project here runs $14,000 – $45,000 installed, with smaller scope work starting around $9,000 – $20,000. Same-day turnaround is not how a remodeling job works, and we won’t pretend otherwise: the written estimate comes first, then the schedule, then the crew. What we do answer same day is your call.

Most Summerlin owners find us after something in the kitchen has already turned: a cabinet door that won’t sit flush no matter how the hinge is adjusted, a drawer front that sags away from the box, a countertop seam that has opened up, or a run of cabinetry along an exterior wall that has begun to delaminate in the dry heat. That last one is the classic Nevada symptom, and it’s usually the first thing we look at when we walk in.
Which Sterling Models This Applies To

Sterling has sold cabinetry and kitchen fittings under several lines over the years, and the part that fits one series rarely fits another. The two details that decide compatibility are the cabinet box depth and the hinge or slide mounting pattern, not the door style. A 12-inch-deep base box takes a different slide and drawer box than a 24-inch-deep one, and two doors that look identical from the front can hang on completely different hinge plates.
To identify yours, open the cabinet and look for the manufacturer label, usually a sticker on the inside face of the door, on the back panel, or on the underside of the drawer box. Write down the model number and the measurements of the opening. If there’s no label, measure the opening width and height to the nearest sixteenth of an inch and the depth of the box; that gets us most of the way to the right part.
On the OEM-versus-aftermarket question, our honest read: for structural parts inside a Sterling box, match the original specification or step up, never down. For hardware like hinges and slides, a quality aftermarket equivalent is often the better long-term choice because the mounting pattern is standardized and the replacement is easier to source again later. When we quote, we tell you which side of that line each part falls on, so you’re not guessing.
Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Sterling. We also work with KraftMaid, Cambria, and Silestone, among other documented brands, so if your kitchen has mixed components we can still spec it correctly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Kitchen Remodeling Is Failing
Here’s what a failing kitchen component actually looks like, with the cause behind each one:
- Cabinet doors that drift out of alignment within weeks of adjusting them. The hinge plate screws have lost bite in the box material, which means the mounting holes are wallowed at the substrate; re-tightening will not hold, the plate has to move or the hinge has to be replaced.
- Drawer fronts that sag or rub the frame below. The slide has worn at the roller or the drawer box has racked out of square, a common outcome in low-humidity Summerlin homes where wood cycles between dry winter air and air-conditioned summer, shrinking and swelling seasonally.
- Delamination or bubbling on cabinet faces along an exterior wall. Radiant heat coming through the wall behind the cabinet cooks the adhesive and veneer from the back side; by the time you see bubbles on the face, the panel is finished.
- Countertop seams that open or a surface that has chipped at the edge. Thermal movement and impact at the overhang; a seam repair is a different job than a full top replacement, and we tell you which one you actually need.
- A soft spot or give in the cabinet floor under the sink. Water has reached the substrate and the panel has swollen; this is the one to act on quickly, because the cabinet box below the sink is the first thing a slow leak ruins.
One honest safety note before we go further: kitchen work involves cutting, fastening, and sometimes moving gas or electrical connections behind the cabinet line. If a component is tied to a gas range connection, a hardwired appliance, or the electrical panel, that part of the job needs a trained professional, full stop. We won’t hand a homeowner a wrench and a diagram for anything live, and we’d rather tell you that plainly than have you find out the hard way.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices for the work we do in Summerlin, quoted in writing before a single tool comes out:
| Kitchen remodel (full scope) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: box count and door style for cabinetry, material and edge profile for countertops, and whether the rough-in behind the wall has to move. A straight swap of a few cabinets sits at the low end; a full run replacement with a new island and a routed electrical drop sits at the top. Every price we give is itemized and fixed, so the number you sign is the number you pay, and there are no change orders that appear mid-job unless you ask for something new. The work itself is covered by the 365-Day Done Right Promise: if anything we install fails within that year, we come back and correct it at no charge.
DIY or Call Us?
What you can safely check yourself: measuring the opening, photographing the manufacturer label, confirming whether the cabinet is mounted to the wall or freestanding, and noting whether the failure is cosmetic or structural. That information helps your quote, and it costs nothing.
Where DIY goes wrong: matching a replacement part to a Sterling box without the model number, forcing a hinge plate into wallowed holes, and moving anything behind the cabinet line that carries gas or electricity. Those are the jobs that turn a $200 fix into a $2,000 repair. Call (844) 588-0072 and we’ll tell you honestly which side of that line your kitchen is on, and the estimate is free either way.
FAQs

How long should a Sterling cabinet last in Summerlin? Ten to fifteen years is the realistic working life for standard cabinet boxes and finishes in this climate, with hardware like hinges and slides failing well before the box does. The dry heat and intense sun angle on west-facing walls shorten that, so a Summerlin kitchen along an exterior wall often needs attention sooner than the same cabinets in a milder climate.
Can it be repaired instead of replaced? Often yes, and we’ll tell you when a repair is the right call. Hinge plates, slides, drawer boxes, and door fronts can be replaced independently of the cabinet box, which typically keeps the job in the $4,000 – $13,000 cabinet installation range rather than a full remodel. Call (844) 588-0072 for an itemized answer, free of charge.
How long does the swap take? A hardware or part-level swap on a handful of units is usually a one-day job once the correct part is on site. A full cabinet run replacement runs several days to a couple of weeks depending on scope. We put the schedule in writing alongside the price so you know what you’re planning around.
How do you source the right Sterling part? From your model number or exact opening measurements, matched to a manufacturer-specified component or a quality aftermarket equivalent we can stand behind. Bradford Remodeling Co Summerlin does not stock parts or carry them on a truck; we source the correct part for your specific box, and the written price reflects exactly what’s being installed.
Bradford Remodeling Co Summerlin runs every kitchen job to The Garrison Standard: a written price before work begins, background-checked and uniformed technicians on every job, and a live person answering the phone around the clock. When we close out a project, you get a clean site, a documented scope, and a signed written guarantee in your hand. If you’re in Summerlin and something in your kitchen has already failed, call (844) 588-0072 for a free estimate. We’ll give you the real number in writing.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












