







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The Summerlin Owner’s Guide
We install Silestone-surfaced home additions and ADUs in Summerlin, and the installed price typically lands between $45,000 and $130,000 for an addition, with ADU construction running $90,000 to $220,000. A failing slab or seam doesn’t announce itself: homeowners usually notice a hairline crack along a Silestone seam in the new galley or a dull, chalky patch where the surface meets the sink cutout, months after the addition was finished.

Silestone is a quartz surface, and quartz fails differently than granite or laminate. That distinction drives everything below: which models and series it applies to, how we spot a failing install, what a correct replacement costs in Summerlin, and where a homeowner should stop and call a professional. If your addition’s counter or vanity top has started to go, this page is written for you.
Which Silestone Models This Applies To

Silestone is sold by series, and each series carries its own slab thickness and finish options. The common residential series in Summerlin additions are the standard quartz lines, and the key spec is thickness: 1.2 cm, 2 cm, and 3 cm slabs each need different substrate support and edge treatment. A 1.2 cm slab over a wide unsupported span in an ADU kitchenette is a known failure point; 2 cm or 3 cm is the safer choice over a long run.
To identify what you have, check the fabricator’s label or the underside of the slab edge, and measure the thickness with a tape. The OEM question for Silestone is less about a single “part” and more about matching slab series, edge profile, and cutout pattern so a replacement top reads as one piece with the rest of the addition. Quality aftermarket quartz can match color, but it won’t match Silestone’s warranty terms, so we price both and let you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
- A crack radiating from a cutout. Cracks that start at a sink or cooktop cutout usually mean the cutout was made too close to the edge or the substrate flexed underneath. Quartz is brittle and won’t forgive a moving base.
- A seam that’s opening or darkening. Silestone seams are bonded with epoxy; when the seam line widens or turns gray, the bond is failing, often from heat or moisture in the new Summerlin kitchen.
- A chalky or dull patch. Quartz resin can discolor under prolonged UV and heat, which is common on a top set near an ADU’s west-facing window.
- Rocking or a hollow sound when tapped. That points to a substrate problem, not the slab itself: the base cabinet or plywood decking has shifted or swollen.
- A chip at the edge or corner. Chips happen at high-traffic corners in a busy addition; some are repairable, some signal a slab that needs replacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Summerlin addition, expect a counter or vanity top replacement to run $2,000 to $6,500 installed, and a kitchen island top in the new space to land at $3,000 to $10,000. The range comes down to slab thickness (3 cm costs more than 1.2 cm), edge profile, number of cutouts, and whether the substrate needs repair before the new top goes down.
We give a written, line-item price before any work starts: slab, fabrication, cutouts, tear-out, and install, itemized. No number moves at the door. The installed work carries our 365-Day Done Right Promise: if the seam or the install fails within a full year, we return and correct it at no charge.
DIY or Call Us?
You can safely check the basics yourself: measure the slab thickness, look at whether the base is level, and note where the crack or seam is. What you shouldn’t do is try to lift, cut, or re-bond a quartz slab. A 3 cm Silestone top is heavy and brittle, and a bad epoxied seam or a slab that lets go is a genuine injury risk, not a weekend project. We’d rather you call than get hurt.
For anything beyond a visual check, call (844) 588-0072. We’ll talk through what you’re seeing and give you a free estimate with the price in writing.
FAQs

A properly installed Silestone quartz top lasts decades, but a seam or cutout that was poorly supported can fail in as little as a few years. In Summerlin’s dry heat, a top near an unshaded window ages faster; substrate and support matter more than the slab itself.
Sometimes. A chipped edge or a small seam gap can often be re-bonded and color-matched, while a crack radiating from a cutout usually means replacement. We’ll tell you honestly which you’re looking at before you commit.
A vanity or single countertop replacement is typically a one-day job once the slab is fabricated; a full kitchen top in an addition takes a bit longer. We’ll give you the schedule in writing with the price.
We work from a documented roster of name-brand materials, including Silestone, Cambria, KraftMaid, and Kohler, so the slab series, edge, and fixtures are traceable and warranty-backed. We price OEM Silestone and a quality aftermarket quartz side by side and let you choose.
Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Silestone. We’re part of the Garrison Partners family, held to The Garrison Standard, and our technicians have up to 22 years of experience. Calls are answered by a live person 24/7.
Call (844) 588-0072 for a free estimate on your Summerlin Silestone addition or ADU work.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












