







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Summerlin Owner’s Guide
Schluter kitchen remodeling in Summerlin typically runs $14,000 – $45,000 installed, and a failing component is usually corrected as part of that scope rather than as a standalone repair. We match the component to your Schluter system, price it in writing before tools come out, and stand behind the installation for a full year under the 365-Day Done Right Promise. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Schluter.

Owners in Summerlin usually find the problem the same way: a tile edge that lifts slightly when pressed, a grout line that keeps cracking in the same spot, or a corner of the kitchen floor that sounds hollow underfoot. Schluter makes bonded waterproofing systems and edge profiles, not a single part, so the “failure” is almost always one component of a system where the membrane, trim, or transition came loose from its substrate.
Key Takeaways
- Installed kitchen remodeling in Summerlin: $14,000 – $45,000.
- Most Schluter failures trace to surface prep, adhesive choice, or thermal movement, not the product itself.
- Written price before work starts. 365-Day Done Right Promise on completed work.
- Live person answers the phone, day or night.
Which Schluter Models This Applies To

Schluter’s kitchen work spans a few distinct product families, and knowing which one is on your floor or wall changes the fix. Kerdi and Kerdi-Band cover bonded waterproofing for wet zones and backsplash transitions. Ditra and Ditra-Heat handle uncoupling and radiant floor buildup under tile. Schiene, Dilex, and Reno-U are the edge and movement profiles at perimeters, thresholds, and tile-to-drywall lines. Each has its own sizing conventions: Schiene comes in heights from roughly 5/16 inch up to about 1/2 inch to match your tile thickness, while Kerdi-Band is specified by width (commonly 5 inch and 7-1/4 inch rolls). Measure the profile height and the tile thickness before you order anything.
Identifying the right component starts with the label on the original roll or box if you still have it, then the physical dimensions if you don’t. OEM Schluter profiles are extruded to tolerances that generic trim doesn’t match, so a cheaper lookalike often sits proud of the tile or leaves a visible lip at the transition. That’s the OEM-versus-aftermarket decision in one line: the profile is a finish component, and a mismatched height shows for the life of the kitchen. We source matched components through documented supply channels and confirm fit before ordering. We don’t claim to stock parts, and nothing rides on a truck.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
- Hollow sound underfoot near the kitchen perimeter. This usually means the uncoupling layer lost bond to the substrate, often from thin-set that skinned over before the tile went down.
- Cracks that reappear in the same grout line. A recurring crack along a straight run points to missing or compressed movement joints at the room’s edges.
- Edge profile lifting away from the wall or cabinet. Adhesive that didn’t fully cure, or a profile cut short of the corner, leaves the trim free to work loose.
- Dark staining or efflorescence at the backsplash base. Water getting behind the tile face suggests the waterproofing layer wasn’t lapped correctly at a seam or corner.
- Lippage at thresholds and transitions. A profile sized for the wrong tile thickness sits proud or recessed, and you feel the edge every time you walk into the kitchen.
In Summerlin’s dry heat, the daily swing between air-conditioned interiors and afternoon sun through west-facing kitchen windows pushes tile assemblies through more expansion and contraction than most people expect. That movement finds the weakest seam first, which is why the same crack returns if only the grout gets patched.
Replacement Cost & What’s Included

Correcting a Schluter component rarely stands alone. It’s usually folded into the kitchen scope, and here’s how that prices in Summerlin:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Backsplash installation (where most membrane and profile failures show): $800 – $2,500
- Countertop installation: $2,000 – $6,500
- Cabinet installation: $4,000 – $13,000
The range moves on square footage, whether the substrate needs repair, and whether you’re resetting tile over an existing assembly or rebuilding it. Every quote is itemized: parts, labor, prep, and disposal as separate lines, written before work starts. Completed work carries the 365-Day Done Right Promise: if the installation fails inside that year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Press along the profile edges and listen for hollow spots, photograph any recurring crack, and measure the profile height and tile thickness so you know what you’re dealing with. What goes wrong with DIY on Schluter systems is the hidden layer. Waterproofing depends on correct lap direction at seams and corners, and uncoupling depends on thin-set mixed and applied to spec. Get either wrong and the tile looks fine for a season, then fails from underneath, which means the whole assembly comes back up. There’s no injury risk here, just an expensive redo. If you’ve got a lifted profile or a crack that keeps returning, call (844) 588-0072 and we’ll price the correction honestly.
FAQs

A properly installed Schluter assembly should hold up for the life of the tile, often 20 years or more. Failures in Summerlin typically show inside the first few seasons, because the summer heat cycles stress the assembly early. If yours is failing now, call (844) 588-0072 for an exact quote. Estimates are free.
Sometimes. A single lifted profile at a threshold can often be reset without touching the field tile, while a membrane failure behind a backsplash usually means removing the tile in that zone. We’ll tell you which one you’re facing in the written quote, not after the demolition starts.
A profile reset is typically a day. A backsplash rebuild with new waterproofing usually runs two to four days, and a full kitchen remodel runs several weeks depending on cabinet and countertop lead times. You’ll get the schedule in writing up front.
We match the component to your existing Schluter product by model and measurement, then source it through documented supply channels and confirm fit before ordering. We work with a documented roster of name-brand materials, and we also handle KraftMaid, Cambria, and Silestone when the scope widens.
Get Your Written Price
Bradford Remodeling Co Summerlin answers the phone with a live person around the clock. A background-checked, uniformed technician confirms the failing component and the scope, and you get a written price before any work starts. Call (844) 588-0072 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












