A Bradford company - serving Summerlin, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Summerlin

Schluter Driveway & Pavers in Summerlin, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Summerlin
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Driveway & Pavers: The Summerlin Owner’s Guide

Schluter-compatible paver and drainage assemblies for driveways here run roughly $7,000 to $18,000 installed as part of a full paver driveway in Summerlin, and we schedule installations rather than same-day emergency swaps, because setting the substrate and edge restraint right takes days, not hours. Owners usually find out something failed the same way: a paver rocks underfoot when they roll a trash bin out, a puddle sits on the slope two days after a rain, or a line of sand washes out along the joint nearest the garage apron. That drainage-and-edge behavior is what the Schluter profile is there to control, and when it fails, you feel and see it before it’s visible from the street.

General contractor measuring and leveling wood framing in a residential renovation in Summerlin, NV

Call (844) 588-0072

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter’s paver and surface systems come in product families, not a single model number, so matching the right component starts with the profile you already have. The DITRA-DRAIN family, the TROBA sub-surface drainage panels, and the RENO and DILEX profile lines are the ones we see tied to driveway and paver work around Summerlin. Identify yours by measuring the visible flange width, reading any stamp on the exposed edge, and noting whether the assembly sits at a surface transition (garage apron, walkway edge, pool deck) or under the pavers themselves. Sizes are stepped, and the fit is specific: an edge profile sized for a 10mm tile reveal won’t clamp a 6cm paver.

OEM parts from a Schluter distributor are guaranteed to spec and match the assembly’s published load rating. Quality aftermarket equivalents can work for drainage mat and some edge profiles, but they’re often slightly thinner in the flange or a different alloy, and that shows up under foot traffic or a vehicle load within a couple of seasons. In Summerlin, where sun at 110°F plus cool night swings cycles the assembly every day, we don’t compromise on the load-bearing pieces. If your part is a surface-drainage piece, aftermarket is defensible; if it’s structural, it isn’t. For surfaces that aren’t Schluter, we also work with Belgard pavers and, inside the house, KraftMaid, Cambria and Silestone.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Driveway & Pavers Is Failing

  • Pavers that rock or sound hollow. A hollow tap means the bedding has lost contact underneath, usually because the base wasn’t compacted in lifts or moisture got under the profile. That’s a substrate problem, not a paver problem.
  • Standing water along the edge strip. Puddling within 24 hours of rain points to a crushed or mis-sloped drainage profile. The Schluter drainage element is meant to move water out and away, not hold it against the edge.
  • Sand or fines washing out at the joints near the apron. Loose joint material migrating toward the street is the first visible sign of an edge restraint that isn’t holding the field. Left alone, the pavers start to spread.
  • A lifted flange or cracked edge profile at a transition. The profile should sit flush and take a vehicle’s load evenly. If you can catch a fingernail under the flange, it’s been pushed up, likely by a poor base or a car turning in hot weather.
  • Ruts or dishing in the drive lanes. Tires tracking the same submerged path over time means the profile and base have settled. In Summerlin’s soil, poorly drained fines cook, crack, and lose bearing capacity fast.

If you tap a paver and hear that hollow note, probed the joint, and the base underneath is loose, that’s the point to stop and get an accurate assessment. A profile swap on top of a failed base only hides the problem for a season.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

An open kitchen and dining area after a remodel

Replacing the failed assembly on a paver driveway in Summerlin typically lands within a full paver driveway range of $7,000 to $18,000 installed, because correcting the drainage and edge profiles almost always means lifting a section of pavers, re-prepping the base, and resetting. What pushes the number up: the square footage affected, how much base needs re-prepping, whether the edge restraint or drainage run is buried under a walkway, and whether the pavers are reusable or need matching replacements. What keeps it in range: a small, well-defined failure at one transition.

Driveway replacement as a whole runs $5,000 to $14,000, and if your failing profiles are past saving, that’s the honest alternative to quote. We give a written line-item price before work starts, separating the profile hardware, base prep, and paver reset, and every completed job carries the 365-Day Done Right Promise. If the work fails within that year, we come back and correct it at no charge.

We’re an independent contractor, not affiliated with Schluter; that’s how we can quote both OEM and qualified aftermarket without a conflict.

DIY or Call Us?

An owner can safely check the profile by eye: look for lift at the transitions, hose-test the drainage run to see where water goes, and tap pavers with the handle of a screwdriver. What you shouldn’t do yourself is lift and reset a paver driveway expansion in the heat, because the base prep, compaction, and edge restraint are where the failure lives, and a bad base ruins a good paver job regardless of the profile. Doing it wrong also voids any warranty the profile carries. Our technicians have up to 22 years of experience reading these assemblies, and we tell you plainly when a repair is enough and when it isn’t. Call (844) 588-0072 for a free estimate.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

How long does a Schluter driveway profile last? In a Summerlin driveway, you should expect 10 to 20 years from a load-rated profile installed over a properly compacted base – the profile itself usually outlives the base. Failure shows up first at transitions and edges, which is where we look when you call.

Can the failing part be repaired instead of replaced? Yes, when it’s a localized failure at one transition or edge. We lift the affected pavers, re-prep the base, and reset a matching or replacement profile. A field-wide settlement problem can’t be repaired, so we quote replacement honestly rather than sell repeated patches.

How long does the swap take? A localized profile and paver reset is usually a two- to three-day job in Summerlin once the parts are in hand, and a whole-driveway replacement runs five to seven days. We don’t promise same-day; we give you the written timeline with the price.

How do you source the part? We match the exact profile from your existing assembly by measure and stamp, then order OEM through a Schluter distributor or a qualified aftermarket equivalent where the fit allows. You see the part spec in the written scope before work starts. Call (844) 588-0072 for a free estimate.

Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.

When a driveway or paver assembly has failed in Summerlin, the fastest path to a real number is a call: (844) 588-0072. We’ll give you a written price before any work starts, and every job carries the 365-Day Done Right Promise.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A single-story rear room addition with tall windows and a new patioA second-story addition that matches the existing rooflineA small remodeled galley kitchen with cabinets to the ceilingA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Summerlin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Summerlin team

A local vetted partner works across Summerlin and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 588-0072
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Bradford Remodeling Co Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch