







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Kitchen Remodeling: The Summerlin Owner’s Guide
If a Sakrete product is part of your kitchen plan and something has failed, a correct replacement or repair on a Summerlin kitchen remodeling project typically runs $14,000 – $45,000 installed for full-scope work, with single-item fixes like cabinet installation ($4,000 – $13,000) or countertop installation ($2,000 – $6,500) well below that. The range tracks scope, not guesswork, and we put the exact number in writing before any work starts.

Most owners discover the failure the same way: a countertop edge that has gone hollow where a Sakrete setting bed met the substrate, a backsplash tile that pops loose along a wall in a Summerlin home built on expansive clay soil, or a cabinet run that has drifted out of level because the floor patch under it shrank. Sakrete products are cement-based setting and patching materials, so what fails first usually isn’t the material itself. It’s how it was mixed and what it was bonded to.
Key Takeaways
- Full Sakrete-involved kitchen remodeling in Summerlin: $14,000 – $45,000 installed.
- Sakrete setting beds and patching compounds fail from mix ratio and substrate movement, not age.
- Summerlin’s clay soils and dry summer air both stress cement-based materials, and the mix has to account for it.
- Written price before work starts. Every completed project carries the 365-Day Done Right Promise.
Which Sakrete Models This Applies To

Sakrete sells a family of cement-based products rather than a numbered appliance line, so “model” here means the specific bag or bucket: Sand Mix, Concrete Mix, Mortar Mix, Surface Bonding Cement, Floor Leveler, and their patching and topping compounds. The bag tells you what it’s rated for. A Sand Mix bag may say it’s for topping and repair, but it’s not the same formula as the Floor Leveler you’d use to flatten a slab before cabinets land. Reading the coverage chart on the back matters more than the brand name on the front.
Identification starts with the physical evidence. Grab the empty bag if you still have it, or photograph the product label on any leftover material. Then measure. A countertop setting bed is usually 1/8 to 1/4 inch thick over plywood; a floor patch is often 1/4 inch to a full inch. Those measurements tell us which Sakrete product was used and which one should replace it.
On the OEM-versus-aftermarket question: Sakrete is widely stocked across Summerlin hardware and building supply stores, so matching the exact product is usually straightforward. Where it gets tricky is the additive or bonding agent that should have gone into the mix. An un-modified setting bed over a wood substrate is a recipe for a hollow countertop, and no bag replacement fixes that unless the prep is corrected too.
Bradford Remodeling Co Summerlin is an independent service provider. We’re not affiliated with Sakrete, and we claim no parts stock and carry no materials on a truck. What we do is specify and install the right product for the job and stand behind the work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Kitchen Remodeling Is Failing
Here’s what failure looks like in real Summerlin kitchens, and what’s actually going on underneath.
- Hollow sound when you tap a countertop or backsplash. The setting bed has separated from the substrate, usually because the mix dried too fast or the surface wasn’t primed. It’s the first sign of a bond that never fully took.
- Loose or popped tiles above the counter. Movement at the wall, not a bad tile. In Summerlin homes on clay soil, a slab or wall can shift seasonally, and a rigid Sakrete bed with no flexibility built in cracks along the grout lines.
- Hairline cracks spreading from a floor patch. Cement-based patch shrinks as it cures. If it was mixed wet, or laid too thick in one pass, the shrink cracks telegraph straight up through the new floor covering.
- Cabinets that won’t sit level. A floor-leveling compound that crumbled or was feathered too thin under the base cabinets leaves them rocking. That rocks the countertop above them and pulls the setting bed loose over time.
- White powder or efflorescence along a wall base. Moisture is moving through the cement. In Summerlin it’s less often rain and more often an interior leak or irrigation line, but the Sakrete surface is telling you water is passing through it.
If any of those match what you’re seeing, the fix usually reaches below the surface. Call us for a look before you patch over it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Summerlin, here’s what the work actually costs, with the range set by scope:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel (Sakrete prep through finish) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves on a few things: how much substrate has to come out and be rebuilt, whether the floor needs a full patch and re-level, and the finish materials you choose. Where Bradford installs premium cabinetry and surfaces, the materials are documented and traceable. We work with KraftMaid, Cambria, and Silestone on the cabinetry and surface side, among other name brands, so specs match what the manufacturer rates the product for.
Parts and labor are quoted as separate lines so you can see exactly what the material costs and what the installation costs. That’s not a courtesy. It’s the Garrison Standard: one written price, no change orders at the door. Every completed project carries the 365-Day Done Right Promise. If the work fails inside that full year, we come back and correct it at no charge.
DIY or Call Us?
Some things are safe to check on your own. Tap a countertop for hollow spots, take a photo of the product label, measure the thickness of a failing patch, and look for moisture stains along the wall base. None of that requires tools or creates risk.
Where DIY goes wrong is in the prep and the mix. A Sakrete setting bed or floor patch that’s mixed too wet, laid too thick, or applied over a surface that wasn’t primed will fail, sometimes within weeks. The material isn’t defective. The application is. And a failed patch takes the finished floor and the countertop above it with it, which turns a $60 bag of product into a five-figure problem.
There’s no spring-tension or gas-line danger here, so the risk is money rather than injury. That’s still enough of a reason to get it right the first time. Call (844) 588-0072 and we’ll tell you honestly whether what you’re looking at is a small patch or a full rebuild.
FAQs

A properly mixed and primed Sakrete installation should hold for 15 to 25 years in a Summerlin kitchen. The failure window opens when prep or mix ratios are off, and that’s usually visible within the first 12 to 24 months, which is why we back our installations with the 365-Day Done Right Promise. Call (844) 588-0072 for an exact quote, and estimates are free.
Sometimes, but only when the failure is isolated to a small area and the surrounding bond is still sound. A hollow spot under one countertop section can be injected and re-bonded. A floor patch that’s cracking across the full room usually has to come out to the slab. We’ll tell you which one you’re facing after we’ve looked at it in person.
A single-item replacement, like a countertop setting bed or a floor patch under cabinets, typically takes one to three days. A full kitchen remodel that touches Sakrete prep, cabinets, and surfaces runs several weeks depending on scope and material lead times. We give you a written schedule with the written price before we start.
We specify the exact product the installation requires and source it from Summerlin-area building supply suppliers with the label and coverage chart intact, so you can verify what went into your kitchen. We don’t stock parts or carry material on a truck. The right product is bought for your job, and the written scope says which one and why.
If a Sakrete product is at the center of a problem in your kitchen, the cost of guessing is higher than the cost of a look. Bradford Remodeling Co Summerlin works with a documented roster of premium brands and puts every price and every guarantee in writing before a single tool comes out. Call (844) 588-0072 to schedule your free estimate, and a live person will pick up.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












