







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Bathroom Remodeling: The Summerlin Owner’s Guide
We install Quikrete-compatible bathroom remodeling in Summerlin, and a full bathroom typically runs $9,000 to $28,000 installed, with small bathrooms landing between $5,000 and $12,000. Quikrete isn’t a fixture brand – it’s the concrete, mortar, and patching material family that goes under and behind the finished surfaces – so when we say a Quikrete material is failing, we mean the substrate work has moved, cracked, or let water through. Summerlin owners usually find out the hard way: a tile pops loose near a shower valve, grout in a shower pan turns dark within weeks of re-grouting, or a floor tile rocks underfoot because the mortar bed under it has gone.

Key Takeaways
- Bathroom remodels in Summerlin: $9,000 to $28,000, small bathrooms $5,000 to $12,000.
- Quikrete products are substrate and setting materials, not the finished fixture – so failures show up as loose tile, cracked grout, and movement.
- We write the price before work starts, and every project carries the 365-Day Done Right Promise.
Bradford Remodeling Co Summerlin is an independent service provider. We’re not affiliated with Quikrete, and we don’t claim to be – we know their material lines well because we install over them.
Which Quikrete Models This Applies To

Quikrete sells more than 100 concrete and masonry products, and the ones that matter in a bathroom are a narrow group: mortar mixes for setting beds and tile, patching compounds for substrate repair, sand-topping mixes, and their anchoring and concrete-detail products. The model naming matters because a bag of Quikrete Mortar Mix (Type N) and a bag of Quikrete Sand/Topping Mix do very different jobs, and using one where the other belongs is one of the most common reasons a Summerlin shower fails inside the first two years.
To identify what you have, check three things. First, the exact product name on the bag or pail band – not just “Quikrete,” but the full line name. Second, the weight: standard bag weights run 40, 60, and 80 pounds, and older stock may carry different weight markings for the same product. Third, the batch or date code printed on the bag, because Quikrete setting materials have a shelf life measured in months, not years, and material stored in a Las Vegas garage through summer heat can be spent before it’s ever opened. That’s a real gotcha in Summerlin – we’ve pulled bags off jobs where the material was technically within date but had been cooked in a hot garage and didn’t behave like fresh stock.
On the OEM-versus-aftermarket question: Quikrete products are the OEM specification in most bathroom substrate work, and quality aftermarket equivalents (a comparable polymer-modified thinset from another maker, for example) can substitute where the application calls for it. The decision comes down to what’s already in place and what the tile or fixture manufacturer specifies – not what’s cheapest at the store. We work from a documented roster of name-brand materials, including KraftMaid, Cambria, and Silestone, so every specification is traceable rather than guessed at.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Bathroom Remodeling Is Failing
Quikrete substrate materials fail differently than fixtures do. Watch for these five symptoms:
- Tile that pops loose or sounds hollow when tapped. The setting bed under the tile has lost bond, usually from moisture movement or a mix that cured too fast in dry heat. A hollow tap near a shower valve is the earliest warning you get.
- Grout that cracks in straight lines. Straight-line grout cracks follow the joints in the substrate below, which means the Quikrete bed or backer assembly has moved. Re-grouting alone hides it for a season and no longer.
- Dark or damp grout in a shower pan that returns after cleaning. Water is getting behind the surface and sitting against the substrate. In Summerlin’s dry climate this often dries out visibly between uses, which fools owners into thinking the problem cleared up.
- Floor tile that rocks underfoot. The mortar bed beneath the tile has debonded or the substrate moved. A rocking tile flexes every time it’s stepped on, which cracks the grout around it within weeks.
- A dip or hump where the floor meets the wall. That’s a patching or topping compound that held moisture or cured unevenly. It rarely stays cosmetic – it telegraphs through the tile above it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Bathroom remodeling in Summerlin runs $9,000 to $28,000 installed, and small bathroom remodels run $5,000 to $12,000. Within that, the individual pieces we quote most often:
- Walk-in shower installation: $4,500 to $12,000
- Tub-to-shower conversion: $3,500 to $10,000
- Shower replacement: $3,000 to $8,500
- Bathroom vanity installation: $800 to $3,000
What drives the number: how much existing substrate has to come out, whether the shower pan is being rebuilt or replaced, tile selection and layout complexity, and whether the rough-in plumbing or electrical needs moving. A failed substrate repair that exposes framing costs more than a surface-level re-tile because the work behind the wall has to be corrected before anything new goes down. We quote parts and labor as separate lines so you can see where the money goes, and we write that price before any work starts. Every completed project is covered by the 365-Day Done Right Promise – if it fails within that year, we come back and correct it at no charge.
DIY or Call Us?
Some checks are safe and worth doing yourself. Tap tiles lightly and listen for hollow spots. Look at the caulk lines at the shower base and behind the toilet for separation. Check the date code on any leftover Quikrete bags you were handed. Note where the grout cracks run and whether they return after cleaning.
Where DIY goes wrong is the repair itself. Removing a set tile or breaking out a shower pan can open the waterproofing layer, and once that’s open, water goes straight to the substrate – which is exactly the failure you were trying to fix, now one layer deeper. Shower valves and any electrical work in a wet area are jobs for a trained professional, not a weekend project. We’re background-checked, uniformed technicians on every job, and our technicians have up to 22 years of experience. A live person answers our phone 24 hours a day, so call (844) 588-0072 for a free estimate.
FAQs

A properly installed Quikrete setting bed or substrate repair should hold for the life of the tile above it – typically 15 to 25 years in a well-ventilated bathroom. The failure point is rarely the material itself. It’s installation: dry-mix proportions, curing conditions, or a waterproofing layer that was compromised. In Summerlin’s low humidity and high summer heat, materials that weren’t kept sealed and shaded before use can underperform from day one. Call (844) 588-0072 for an exact quote on your situation – estimates are free.
Sometimes, yes – a single loose tile or a localized grout crack can often be corrected without tearing out the whole floor. But if the failure is in the shower pan or a shower wall, partial repair usually just delays the full job and costs more in the end. We’ll tell you honestly which category you’re in before any work starts. Call (844) 588-0072 to schedule a free estimate.
A shower replacement runs 3 to 5 working days once materials are on site; a full bathroom remodel typically takes 2 to 4 weeks depending on scope. Substrate and setting-material work adds cure time that can’t be rushed. We give you a written timeline with the written price before we begin. Call (844) 588-0072 for a free estimate.
We source by specification – the exact product line called for by your tile or fixture manufacturer – from established suppliers, and we check date codes on arrival. We don’t claim to stock Quikrete materials or carry them on a truck. What we do is document what goes into your bathroom so the specification is traceable, and we work with a documented roster of premium brands across the project, including KraftMaid, Cambria, and Silestone. Call (844) 588-0072 and we’ll walk you through it.
Every project we take on in Summerlin gets the same treatment: a written price before any work starts, background-checked and uniformed technicians, the 365-Day Done Right Promise backing the finished work, and a signed written guarantee in your hand at close. Bradford Remodeling is part of the Garrison Partners family, established in 2004, and every location is independently owned and operated under The Garrison Standard. If your bathroom has a Quikrete problem you’d rather hand off to someone who’s seen it before, call (844) 588-0072 to schedule your free estimate. A real person picks up.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












