







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Kitchen Remodeling: The Summerlin Owner’s Guide
Kitchen remodeling for Plant Prefab homes in Summerlin runs $14,000 – $45,000 installed, with most single-room projects landing in the middle of that band depending on cabinet line, surface material, and whether your layout moves. Bradford Remodeling Co Summerlin works with Plant Prefab owners to replace or upgrade kitchens built on the company’s panelized wall and floor systems, and we give a written price before work begins. Estimates are scheduled around your calendar, not ours.

Owners usually call us after a specific failure makes the decision for them. Cabinet boxes that were fitted at the factory pull away from the wall panel as the adhesive-backed fasteners age. Drawers rack when the box has shifted. Countertop seams open at the panel joint because the substrate beneath has flexed through a Summerlin summer. Doors stop sitting flush. The kitchen looked fine at move-in and now something is visibly wrong at more than one spot.
Key Takeaways
- Plant Prefab kitchens are built on dimensional panel systems, so cabinet and surface replacements have to respect the panel grid, not just the visible wall.
- Installed kitchen remodeling in Summerlin runs $14,000 – $45,000; small kitchens run $9,000 – $20,000.
- Written price before any work starts, and a 365-Day Done Right Promise on completed work.
- Our technicians have up to 22 years of experience. We are an independent service provider, not affiliated with Plant Prefab.
Which Plant Prefab Models This Applies To

Plant Prefab builds through several lines, and the ones we see most in Summerlin kitchens are the panelized single-family systems and the modular series used across the company’s residential work. What matters more than the marketing name is how your kitchen wall is built. Panelized systems put cabinets into a prefigured layout with defined stud spacing and a finished panel face, and replacements have to meet that geometry.
Identify what you have before ordering anything:
- Data plate or drawings. Check the electrical panel label, the mechanical closet, and the documentation packet that came with the home. Model and panel designations are usually printed there.
- Cabinet fastening. Factory-fitted cabinets in a panel system often mount to a defined blocking line. Measure stud centers, not just the cabinet width.
- Opening dimensions. Measure the rough opening, the finished opening, and the gap to the panel seam. A quarter inch difference between a nominal 30-inch and an actual 29 3/4-inch box changes what fits.
On the OEM-versus-aftermarket question: Plant Prefab does not sell kitchen cabinets as a retail parts line, so most Summerlin owners are choosing between a factory-spec replacement coordinated through the builder and a name-brand cabinet line that meets the same spec. We work with KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures. That choice trades exact factory continuity for a documented manufacturer warranty and a specification you can actually read.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Kitchen Remodeling Is Failing
- Cabinets pulling from the wall panel. The fasteners have lost bite in the panel face or the blocking behind it. In a panel system, that is a substrate problem, not a cabinet problem, and swapping only the box repeats the failure.
- Countertop seams opening. Panel joints and surface seams move at different rates under Summerlin heat cycles. A hairline at move-in becomes a visible gap, and water follows it into the substrate.
- Doors that no longer sit flush. The box has racked. Usually the panel line has moved or the blocking has compressed, and hinge adjustment only hides it for a season.
- Soft or discolored flooring at the toe kick. Slow leak from the rough-in or a failed seal at the surface edge. Left alone, it reaches the panel and the subfloor together.
- Squeaks and deflection underfoot. The floor panel is flexing. It shows up first along the kitchen run where foot traffic is heaviest.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed kitchen remodeling in Summerlin runs $14,000 – $45,000. Small kitchen remodeling runs $9,000 – $20,000. Line items when you need to isolate the scope:
| Line item | Installed range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the number: whether the panel substrate needs repair before new cabinets go in, cabinet line and door style, surface material and edge profile, and whether the layout changes. We separate parts from labor on the written quote so you can see what the cabinet cost and what the install cost. Every completed kitchen carries the 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
Some checking is safe and sensible. Measure the rough opening, photograph the panel seam, note the model plate, and confirm where the shutoff is before anything gets moved. That information helps whoever does the work and costs you nothing.
Where it goes wrong: kitchens on panel systems are tied to electrical rough-in, plumbing rough-in, and gas lines for ranges. Cabinets and surfaces are heavy, and removing a factory-fitted box that carries a live circuit or a shutoff behind it is not a weekend job. We don’t hand out a step-by-step here because the risk is real and the payoff is small. A licensed, insured crew with background-checked, uniformed technicians on the job removes that exposure. Call (844) 588-0072 and we’ll tell you what the scope actually looks like before you spend a dollar.
FAQs

Expect 15 – 25 years from the cabinets and 10 – 15 from surfaces in Summerlin’s climate, with panel and substrate performance being the variable that sets the ceiling. Summerlin’s dry heat and big day-night temperature swings are hard on adhesive and sealant, so seams and fasteners age faster here than in a coastal market. If your kitchen is older than that band and showing more than one symptom on the list above, a scope review is worth the call. Call (844) 588-0072 for a free estimate.
Sometimes, and we’ll tell you when it is. A single seam, one racked box, or localized floor deflection can often be corrected without a full remodel. What usually can’t be repaired is repeated fastener failure across several cabinets, because the substrate is the problem and the fix is behind the panel. We’d rather quote the smaller job and be honest than sell a remodel you don’t need. Call (844) 588-0072 to schedule the walk-through.
Most Summerlin kitchen remodels run three to six weeks on site, with cabinet-only work at the shorter end and full remodels with surface and rough-in changes at the longer end. Panel substrate repair, cabinet lead time, and countertop fabrication are the three things that set the schedule, and all three go in the written scope up front. Your price doesn’t move once work starts, and the schedule is documented before the crew arrives. Call (844) 588-0072 for a free estimate.
We spec to your panel layout and your model documentation, then source through the brands we install as standard. KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures all come with manufacturer specifications and warranties, so the part is traceable instead of guessed. We don’t claim stock or parts carried on a truck; every item is ordered to your scope and confirmed in writing. Call (844) 588-0072 and we’ll go through it with you.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












