







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Home Additions & ADU: The Summerlin Owner’s Guide
If your PGT window, door, or glazed system is part of a Summerlin addition or casita build, and something has failed or gone out of spec, we replace and re-glaze PGT-compatible components as part of the larger build. A home addition in Summerlin runs $45,000 – $130,000; an attached or detached ADU runs $90,000 – $220,000; a garage conversion runs $30,000 – $80,000. We’re an independent remodeling contractor, not affiliated with PGT, and every one of those numbers is with you in writing before a tool comes out.

Owners in Summerlin usually find the failure the same way: a fogged pane they can’t clean, a door that drags a quarter-inch at the strike, or a slider that no longer seals against the wind coming off Red Rock. Then the contractor question follows, and that’s where this page earns its keep.
Key Takeaways
- Summerlin’s swing between desert sun and winter night temps is what kills glazed PGT components first.
- Match the part to the PGT series and label on your unit before anything gets ordered.
- Written prices, background-checked uniformed technicians, 365-Day Done Right Promise on the work.
Which PGT Models This Applies To

PGT builds across several lines, and each line uses hardware and glazing specs that don’t interchange. Their vinyl new-construction windows, their impact-rated lines, and their aluminum and wood-clad product families all use different balances, rollers, and sash profiles. A roller that drops into one series won’t sit in another without shimming, and shimming a roller is how you get a door that drags again within a year.
How to identify what you have in a Summerlin home:
- Find the etched or printed label on the glass edge or the frame jamb. It carries the series and a date code.
- Measure the sash or the panel opening, not the rough opening. Contractors order off sash dimensions because that’s what the part fits.
- Photograph both sides of the piece and the label before calling. That single habit saves a second trip and a wrong order.
The OEM-vs-aftermarket call is real with PGT. OEM parts carry the manufacturer’s spec and warranty traceability, which matters when the 365-Day Done Right Promise is sitting underneath the job. Quality aftermarket equivalents exist and cost less, but they have to match the series and the rated wind load, and Summerlin sits in a wind zone where a cheap balance or a low-rated roller is a bad bet. We work with KraftMaid, Cambria, and Silestone on the interior side of these builds as well, and the same discipline applies: documented specs, traceable materials.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Home Additions & ADU Is Failing
The failures we see in PGT units in Summerlin come from five usual places:
- Fogged or hazy glass. The sealed unit’s edge spacer has broken and moisture is getting between the panes. Desert heat cycling is the root cause, and no kind of cleaning fixes a failed seal.
- A door that drags or won’t latch. Worn or flattened rollers, or a balance that has lost tension from the constant expansion and contraction. Look for a burnished track and a strike that has shifted.
- A slider that rattles or leaks air at the jamb. Weatherstrip has flattened, or the sash has dropped. In Summerlin, that shows up first as dust ingress, then as wind whistle.
- Cracks near the corners of the frame or the sash. Vinyl gets brittle with UV exposure and cold-night contraction. A hairline at the weld is the early warning, and it tells you the piece is nearing end of life, not that it needs tightening.
- A sash that won’t stay up. The balance assembly is failing. It’s a spring-loaded part, and it’s the one on this list you should not take apart yourself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Because this part lives inside a larger build, the honest pricing picture for a Summerlin homeowner is the project range, not a $40 part number:
| Project | Installed Range (Summerlin) |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What moves the range: foundation and slab work, the number of PGT units the addition needs and whether they’re impact-rated, roof tie-in, and rough-in for plumbing and electrical (the pipes and wiring inside the walls before finishes). We give you a written price before any work starts, with parts and labor broken out separately, so you see what the glazing actually costs. All completed work carries the 365-Day Done Right Promise: if it fails inside that full year, we come back and correct it at no charge.
DIY or Call Us?
Here’s where a homeowner can safely spend their own Saturday: cleaning tracks, checking and replacing weatherstrip, tightening a strike plate, and measuring your sash for a replacement quote. Photographing the label is free and it’s the most useful thing you can do.
Where it goes wrong: the balance assembly. Those springs are under tension, and if you release one without the right tools and technique you can be hurt and you’ll still have a broken window. Sealed glass units are a two-person job with a suck-and-set installation that goes bad quietly when it’s rushed. And on a PGT unit inside an ADU, opening a wall to get at the frame is a code question as much as a carpentry one.
Background-checked uniformed technicians, a live person answering the phone 24/7, and a written price before we start. Call (844) 588-0072 to schedule your free estimate.
FAQs

Glass and glazing in Summerlin typically hold 15 – 25 years, and hardware like rollers and balances more often fail in the 8 – 15 year range, with the desert sun and the cold-night contraction speeding up both. Sealed units are the first to go because the edge spacer takes the brunt of the temperature swing. Call (844) 588-0072 for an exact quote – estimates are free.
Weatherstrip and hardware can be replaced on their own, but a failed sealed glass unit can’t be repaired; the seal has to be rebuilt at the factory, so the unit gets swapped. That’s the honest answer, and it saves you paying for a fix that won’t hold.
Weatherstrip and hardware swaps run an hour or two per unit, and a full sealed-unit swap on a single window is typically a same-day job. Larger additions get scheduled around the build, not the other way around, and the price in writing reflects that schedule.
We match the series and label on your unit, then ship the OEM component or a series-correct equivalent with the spec sheet in hand. We don’t carry parts on a truck, which is why the label photo and the sash measurement are worth so much. Call (844) 588-0072 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












