







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Summerlin Owner’s Guide
Kitchen remodeling in Summerlin with Oldcastle materials typically runs $14,000 – $45,000 installed, depending on cabinet count, surface square footage, and whether the rough-in plumbing and electrical need updating. We install Oldcastle-compatible cabinetry, surfaces, and fixtures with a written price before any work starts. Most Summerlin owners discover the failure the same way: a cabinet door that no longer sits flush, a toe-kick panel pulling away from the floor, or a surface seam that opens a hairline crack after a dry summer.

Those are the small signals that mean the substrate or fastening system has moved. In a Summerlin house, that movement is usually seasonal, not a one-off defect. The remedy depends on what’s behind the finish, which is why we look at the assembly, not just the part.
Bradford Remodeling Co Summerlin is an independent remodeler and is not affiliated with Oldcastle. We work with Oldcastle-compatible materials and match specifications to your existing installation.
Key Takeaways
- Installed kitchen remodel range in Summerlin: $14,000 – $45,000.
- Older Oldcastle cabinet lines have specific box depths and door overlay patterns; a mismatch shows up as gapping or binding within months.
- Summerlin’s dry climate and temperature swings stress cabinet joints and surface seams more than humidity does.
- Every project gets a written price up front and the 365-Day Done Right Promise on completed work.
Which Oldcastle Models This Applies To

Oldcastle’s kitchen line covers a few generations of cabinet systems and surface products, and the parts don’t swap between them cleanly. The two things to confirm before ordering anything are the box depth and the door overlay style. Standard base cabinets are 24 inches deep, but some older Oldcastle lines used 22½-inch boxes with a different hinge plate pattern. A 24-inch door front won’t sit right on a 22½-inch box, and the gap shows at the bottom rail first.
To identify your model, look for the label inside the cabinet door or on the back panel of the box. It usually carries a series code and a finish code. If the label is gone, measure the box depth, the door thickness (typically ¾ inch on solid-wood fronts), and the hinge cup bore (35mm is standard, but some series used 26mm). Write those three numbers down before you call anyone.
On the OEM-versus-aftermarket question for Oldcastle specifically: factory parts match the original spec exactly, but availability on older series can be slow. A quality aftermarket equivalent from a documented brand like KraftMaid or Wellborn can match the box and hinge pattern and often installs faster. What matters is that the spec is traceable, which is why we work from a documented roster of name-brand materials rather than whatever is on hand. Cambria and Silestone surfaces follow the same rule: the substrate and edge profile have to match, not just the color.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Kitchen Remodeling Is Failing
These are the symptoms we see most often in Summerlin kitchens, and what each one is telling you about the assembly underneath.
- Doors that bind or rub at the top corner. The hinge plate has shifted or the box has racked slightly out of square. In Summerlin’s dry heat, wood boxes can shrink a fraction seasonally, and a hinge screwed into a softened screw hole won’t hold adjustment.
- Hairline cracks along a surface seam. The seam adhesive has failed or the substrate flexed. This shows up more on surfaces set over a substrate that wasn’t fully acclimated before install, and it widens in summer.
- A toe-kick or filler panel separating from the floor. The fastener has pulled out of the subfloor or the panel was cut short. It’s a small fix, but it signals the whole run may need re-shimming.
- Drawers that slide rough or stick halfway. The slide has worn, or the drawer box is out of square from the cabinet frame moving. Undermount slides are less forgiving of a racked box than side-mount.
- Water staining at the base of a sink cabinet. A slow supply or drain leak has been running down the back panel. The cabinet floor is likely soft and needs to be replaced, not just dried out.
Each of these is checkable without opening a wall. The underlying cause matters more than the visible symptom, because replacing a door on a racked box just moves the problem to the next door down.

Replacement Cost & What’s Included

Here’s what installed work runs in Summerlin, with the parts-and-labor split built into the number rather than tacked on later.
| Scope | Installed Range (Summerlin) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range is driven by cabinet count and box depth, surface material and square footage, whether the rough-in plumbing and electrical need reworking, and how much of the old assembly has to come out before new goes in. We don’t carry parts on a truck or stock them locally. The materials are sourced to your spec and documented before install, so the specification is traceable. Every project gets a written price before the first tool comes out, and completed work is covered by the 365-Day Done Right Promise. If it fails within that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can check yourself safely. Measure the box depth and door thickness, note the hinge bore size, and photograph the label inside the door. Tightening a loose hinge screw with a longer screw into solid wood is a reasonable five-minute fix. What you shouldn’t do is pull a cabinet box off the wall or cut into a surface seam to chase a crack, because both expose the substrate and the fastening system, and an out-of-square box reinstalled wrong will rack the whole run.
Anything involving the sink supply or drain lines is plumbing, and a slow leak behind a cabinet is worth a professional look before the cabinet floor softens further. We don’t give step-by-step DIY instructions for that work. We’ll tell you plainly what needs a trained hand. Call (844) 588-0072 to schedule a free estimate, and we’ll write the price down before any work starts.
FAQs

A well-installed kitchen with documented materials typically holds 15 – 20 years before surfaces or slides need replacement. Summerlin’s dry air and temperature swings stress joints and seams harder than humid climates, so acclimating materials before install matters more here than elsewhere. Call (844) 588-0072 for an exact quote on your project; estimates are free.
Often yes, if the box is square and the substrate is sound. A hinge plate can be re-set, a surface seam can be re-bonded, and a rough slide can be swapped. If the cabinet floor is soft from a leak or the box has racked, replacement is the honest answer. Call (844) 588-0072 and we’ll tell you which one you’re looking at, with the price in writing.
A single cabinet or surface replacement is usually a one-day job. A full kitchen remodel runs several weeks depending on cabinet count and whether the rough-in needs reworking. The written scope states the timeline before work starts, and the price doesn’t move at the door. Call (844) 588-0072 for a free estimate.
We work from your model code, box depth, and hinge bore measurements, then match to a documented brand spec so the part is traceable. We don’t stock parts locally or carry them on a truck, so the part is ordered to your spec. Alongside Oldcastle-compatible materials, we also install KraftMaid, Cambria, and Silestone. Call (844) 588-0072 to get the part matched and priced.
Get Your Summerlin Kitchen Squared Away
A kitchen that’s failing at the seams and doors is a kitchen that’s telling you the assembly has moved, and the fix starts with a written price, not a guess. Bradford Remodeling Co Summerlin gives you that price before any work starts, background-checked and uniformed technicians on the job, and the 365-Day Done Right Promise on every completed project. A live person answers the phone, not a voicemail. Call (844) 588-0072 today for your free estimate and get the scope, the price, and the guarantee in writing.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












