







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Bathroom Remodeling: The Summerlin Owner’s Guide
We install Oldcastle-compatible bathroom remodeling that holds up: a full Summerlin bathroom remodel typically runs $9,000 to $28,000 installed, and small bathrooms land around $5,000 to $12,000. We’re an independent contractor, not affiliated with Oldcastle, and we’ll put the price in writing before any work starts. A single walk-in shower install runs $4,500 to $12,000, with a tub-to-shower conversion at $3,500 to $10,000.

The symptoms are almost always the same. A Summerlin homeowner notices water where it shouldn’t be: a soft spot in the shower pan, a hairline crack spreading across the tub deck, or tile that sounds hollow when you knock it. Sometimes it’s a grout joint that keeps reopening no matter how many times it’s patched. By the time you see the second or third visible crack, the substrate underneath has usually been getting wet for a while. That’s the point where matching the right replacement matters more than patching.
Which Oldcastle Models This Applies To

Oldcastle makes a broad line of bath fixtures and tile products, and the right replacement depends on which line and series you have. Walk into the room and look for the manufacturer label on the fixture or a tile carton left from the original install; it usually lists the series and a size code. Measure the actual opening at the shower pan, tub deck, or vanity cabinet frame, and note the depth of the substrate behind the tile. Those numbers are what let us match a replacement that fits the first time.
The OEM-versus-aftermarket call matters here. For Oldcastle bath fixtures and tile, an OEM replacement is the safest match when the series is still in production, because the drain location, apron height, and mounting pattern line up. When a series has been discontinued, a dimensionally matched product from a documented brand line (we work with KraftMaid, Cambria, Silestone, and others) is often the better long-term choice, since you’re not chasing a discontinued part. One compatibility gotcha specific to this climate: Summerlin’s indoor humidity swings and the hard mineral content of local water fatigue caulk lines and grout faster than in many parts of the country, so we specify a product with a compatible substrate and sealant system, not just a matching color.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Bathroom Remodeling Is Failing
- Hollow-sounding tile. A hollow knock over shower or floor tile means the thinset has let go from the substrate, usually after moisture has worked its way behind the joint. That’s a substrate problem, not a tile problem.
- Grout joints that reopen. When a sealed joint re-cracks within weeks of patching, the movement is coming from underneath: a shifting pan, a flexing subfloor, or a wet backer board. Patching over it delays the visible failure but doesn’t stop it.
- A shower pan or tub deck that stays wet. Water that doesn’t drain or leaves a soft spot when pressed points to a failed membrane or a discontinued drain fitting. In Summerlin, water with high mineral content leaves deposit rings around the fitting that speed up the wear.
- A hairline crack across a tub deck or vanity top. This is often a stress crack from an old mounting point that no longer matches the current fixture. The crack will track along the original stress line until the mounting is corrected.
- Recurring mildew at the base of the shower. Mildew that comes back at the same seam points to water trapped behind the surround, not surface growth. The fix is a new substrate and a properly installed pan, not more bleach.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Summerlin, the installed range for a full bathroom remodel is $9,000 to $28,000; a small bathroom is $5,000 to $12,000. A walk-in shower installation runs $4,500 to $12,000, a shower replacement $3,000 to $8,500, a tub-to-shower conversion $3,500 to $10,000, and a vanity installation $800 to $3,000. Every price is given in writing before work begins.
The range comes down to three things: the size and layout of the room, whether plumbing rough-in has to move, and the finish level you choose. A straight swap where the drain and supply lines stay put sits low in the range. Moving a shower or vanity to a new wall pushes it higher, because that’s new rough-in work. Every project carries the 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely check the easy things: shut off the water, look for the manufacturer label, measure the opening, and note whether the floor is soft. What an owner shouldn’t tackle is the rough-in itself. Moving a drain, re-setting a shower pan, or replacing the membrane behind a tile surround is where a small repair turns into a water-damage repair. Getting the substrate and the waterproofing wrong means paying for the job twice. The same caution applies to any fixture that ties into the supply or drain lines.
We do this work with background-checked, uniformed technicians, and a live person answers the phone 24/7. Call (844) 588-0072 to schedule your free estimate.
FAQs

How long does an Oldcastle bathroom remodel last in Summerlin? Typically 15 to 20 years for tile and fixtures when the waterproofing is done correctly, but the real limiter is the substrate. Summerlin’s hard water and dry-then-humid swings wear on sealant and grout joints faster than in other climates, so a properly installed membrane and a compatible sealant are what give you the full lifespan. Call (844) 588-0072 for an exact quote, and estimates are free.
Can a failing Oldcastle bathroom be repaired instead of replaced? Sometimes. A single failed joint or a loose tile can be repaired cleanly if the substrate underneath is sound. Once water has reached the substrate or the pan has shifted, a partial repair usually fails again within a year. We’ll tell you which side of that line you’re on before anyone starts work.
How long does the swap take? A shower replacement is usually two to four days. A full bathroom remodel runs one to three weeks depending on the room and whether the rough-in moves. We give the schedule in writing with the price, so there are no surprises.
How do you source the part? We match the series and dimensions from the label and measurements, then pull from a documented roster of brand materials with traceable manufacturer specs and warranties. That’s how we keep the replacement compatible and the installation guaranteeable. Call (844) 588-0072 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin. We are an independent service provider and are not affiliated with Oldcastle.












