







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Boulder City, NV
We provide independent Mr-Glass service across Boulder City, NV – measuring real openings in real houses, not ordering to a nominal size and hoping it lands. The one thing that makes our Mr-Glass work here different: Boulder City’s dam-era housing stock is almost never square, plumb, or standard width, so nearly every enclosure we build is templated to the actual opening before the glass is cut. Bradford Remodeling Co Summerlin is an independent Mr-Glass service provider, not authorized or sponsored by Mr-Glass. Call (844) 588-0072 for a free estimate.

Why Boulder City Residents Choose Us for Mr-Glass Service

We know Mr-Glass frameless pivot enclosures, semi-frameless and framed bypass doors, and the stock and custom mirror line because we install them the way the opening demands – not the way the box says. In Boulder City, that matters more than in most towns. The historic core dates to the 1930s-1950s Bureau of Reclamation and dam-worker era, and those small single-story stucco and block homes were built fast, on tight lots, with bathrooms that were never designed for a modern glass enclosure.
We work from field measurements taken on site, then match the glass thickness and temper spec to what’s actually there – 3/8 in. or 1/2 in. tempered glass, cut to the template. Our technicians have up to 22 years of experience, and every job comes with a written price before any work starts and the 365-Day Done Right Promise behind it. You know the number and the guarantee before a single tool comes out. That’s The Garrison Standard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Boulder City
Most of what we fix in Boulder City isn’t a Mr-Glass defect. It’s the meeting point between glass made to a spec and a house built in 1940. Here’s what we actually see:
- Out-of-square, out-of-plumb openings in dam-era bathrooms. A stock or factory-standard enclosure leaves wedge-shaped gaps, and the door sweep and seal gaps let water track onto the floor. A templated custom cut closes that gap; a nominal size never will.
- Hard-water and mineral spotting mistaken for glass failure. Boulder City’s dry, mineral-heavy water etches and clouds the glass coating over time. Owners often read it as a defective panel when it’s buildup and seal deterioration that a proper clean-and-reseal addresses.
- Brittle, yellowed seals, sweeps, and hinges. Intense high-desert summer UV and heat bake the hardware long before the glass gives out. The glass survives; the gaskets and hinges fail first. Swapping hardware is far cheaper than a new enclosure.
- Leaks blamed on the enclosure that come from the framing. In older single-story stucco and block homes, sagging or rotted framing behind the tile – and a crumbling curb – lets water move behind the wall. The enclosure gets blamed for a leak whose real source is behind it.
- Undocumented additions and tight historic lots. Old-timers here know that historic-district lots often hide original 1930s dam-era utility lines and undocumented additions. A bathroom opening isn’t always the width the drawing shows once you get a tape on it.
Mr-Glass Service in Boulder City: What Local Conditions Mean for Your Equipment
Boulder City was laid out and built by the federal government for Hoover Dam workers, and that origin shows up in the glass work. Many homes sit on tight 1930s-era lots with small, irregularly built bathrooms – so glass enclosures here are overwhelmingly custom-cut to fit, and taking field measurements before fabrication is the difference between a clean fit and a gap you can see daylight through. Because the town retains its historic small-town development pattern with strict limits on growth, most of the work is renovation, addition, and rebuild on decades-old lots rather than new building. Permitting and design review run through a small municipal building department with a historic-preservation overlay that few out-of-town contractors account for. That overlay affects what you can change about an exterior wall, a window opening, or a visible addition – so a bathroom project in the historic core can need a review step a project in a newer subdivision never does. We plan the Mr-Glass scope around that, not against it.
Mr-Glass Models & Products We Service in Boulder City
We work across the Mr-Glass line: frameless pivot shower enclosures in 3/8 in. and 1/2 in. tempered glass, typically custom-cut to the opening; semi-frameless and framed sliding or bypass shower doors for tub-to-shower conversions; and custom and stock mirrors – beveled and framed vanity mirrors cut to size – plus specialty glass like shelves, table tops, and cabinet glass cut as replacement pieces. On parts, we match the glass thickness and temper spec to the opening and use quality hinges, channels, and sweeps. We source original-profile OEM hardware where that specific part is still available and proven aftermarket where it isn’t. We don’t claim to keep local stock – parts are sourced to the job. Where framing or the shower pan is failing, correct replacement with properly measured glass is the honest call rather than re-drilling old holes or patching a moving opening. For more on the Mr-Glass range, see our Mr-Glass service page.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Boulder City
Every price here is a written price before any work starts, with no numbers that move at the door. What drives the range is opening size and irregularity, glass thickness, hardware grade, and whether the curb or framing needs correction before glass can go in.
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
| Bathroom Vanity Installation | $800 – $3000 |
| Small Bathroom Remodel | $5000 – $12000 |
Your free estimate includes an on-site measure of the actual opening, a check on the curb and reveal, and a written line-item quote. Call (844) 588-0072 for an exact quote – estimates are free.

Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Boulder City
Rarely. In a dam-era Boulder City bathroom, the tile walls and curb are typically decades out of plumb and the opening is neither square nor a standard width, so a factory-standard enclosure ordered to a nominal size leaves tapered gaps at the door. A qualified local glass pro templates the actual opening and has the tempered panels cut to that template, with hardware sized for the real swing clearance. If the curb is crumbling or the wall behind the tile has moved, the enclosure waits until that’s corrected – new glass can’t fix a wall that’s still shifting. Call (844) 588-0072 to get your opening measured.
Usually not. In Boulder City’s mineral-heavy water and high UV, the cloudiness is most often hard-water and mineral buildup plus deteriorating seals, not a bad panel. The glass itself usually outlives the hardware around it. A clean-and-reseal often restores the clarity without replacing the glass. Call (844) 588-0072 and we’ll tell you honestly whether you’re looking at buildup or a real failure.
Often no. The tell-tale for a leak blamed on the enclosure is usually perished sweeps and seals rather than the glass itself – dried-out, brittle sweeps let water past the door. Replacing the sweeps and any failing hinges usually stops it. If the leak is coming from behind the tile, the issue is framing or the curb, and that has to be corrected first. Call (844) 588-0072 for a free look.
It very likely does, and the historic-preservation overlay in Boulder City’s core can add a review step that a newer subdivision wouldn’t need. Boulder City’s small municipal building department runs design review, and bathroom projects in the historic core can touch exterior-wall or plumbing questions that trigger a permit. We walk through what applies to your address before the work is scoped and priced. Call (844) 588-0072 to talk it through.
Plan on a couple of weeks start to finish for most custom enclosures – field measurement first, then tempered glass is cut to the template and the hardware is sourced to the job, then installation. The exact time depends on the opening and on whether framing or the curb needs correction first. Call (844) 588-0072 for a timeline on your bathroom.
Service Areas Near Boulder City
Our Boulder City service area covers ZIP codes 89005 and 89006, and we also serve homeowners in nearby Henderson, Whitney, Sandy Valley, Las Vegas, and Winchester.
Book Your Mr-Glass Service in Boulder City Today
Call (844) 588-0072 for a free estimate on your Mr-Glass enclosure, mirror, or custom glass in Boulder City – written price before any work, 365-Day Done Right Promise behind it. A live person answers around the clock.
Written by the team at Bradford Remodeling Co Summerlin.












