







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Windows & Doors: The Summerlin Owner’s Guide
We install Mr-Glass-compatible windows and doors for Summerlin homeowners, and a full window replacement typically runs $4,500 – $15,000 installed, while impact-rated units come in at $8,000 – $25,000 depending on count and glass package. A single failed component, like a broken balance, a leaking glazing bead, or a hood that won’t latch, usually costs far less to correct than a full unit swap. We’re an independent service provider, not affiliated with Mr-Glass, so we match the part to your actual unit and quote it in writing before anything gets ordered. Most Summerlin owners find the failure the same way: a window that won’t stay up, a door that drags or whistles, or a fogged pane they notice on a bright afternoon.

Key Takeaways
- Full window replacement in Summerlin: $4,500 – $15,000. Impact units: $8,000 – $25,000.
- Single-part repairs are quoted in writing before work starts, per The Garrison Standard.
- We carry no parts on a truck and hold no stock. Every part is ordered to your unit’s spec.
- Every completed job carries the 365-Day Done Right Promise.
Which Mr-Glass Models This Applies To

Mr-Glass windows and doors turn up in Summerlin homes built across several decades, and the part you need depends on which line you have, not the year the house went up. The first thing we do is read the manufacturer’s label, usually etched into the glass corner or printed on a spacer, which gives the series, the glass package, and often the date code. From there we measure the visible glass, the frame depth, and the balance channel, because a part that fits one Mr-Glass series won’t seat in another.
Here’s the compatibility gotcha that trips up most homeowners ordering online: identical-looking Mr-Glass units can use different balance ratings depending on sash weight, and a replacement balance rated a few pounds light will let the sash drift down again within weeks. We match the rating, not just the dimensions, which is why the label matters as much as the tape measure.
On OEM versus aftermarket, our position is straightforward. OEM parts are the surest fit when the unit is still under its manufacturer warranty, so we default there. Once that warranty has lapsed, a quality aftermarket equivalent from a documented supplier often does the same job for less, and we’ll tell you which side of that line your unit falls on before quoting. Both options get a written price.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Windows & Doors Is Failing
The symptoms below are the ones Summerlin homeowners describe most often, each paired with what’s usually behind it.
- The window won’t stay open, or slams shut. The balance spring or block has lost tension. It’s the most common failure we see, and it’s a sash-weight problem more than a broken part in many cases.
- Fog or condensation trapped between panes. The sealed glass unit’s perimeter seal has failed and let moisture in. Once the seal is gone, the unit won’t dry out on its own and needs replacement.
- Water staining on the interior sill or drywall. A failed glazing bead or a dried-out weather seal is letting Summerlin’s wind-driven rain past the frame. Left alone, it reaches the substrate behind the wall.
- A door that drags, sticks, or won’t latch square. Settled hinges, a worn threshold, or shifting hardware. Desert temperature swings work on door frames year-round, and Summerlin’s summer heat loads frames in a way milder climates don’t.
- Drafts or a whistle along the frame edge. Worn weatherstripping or a sash that’s no longer sitting true. It’s a small part with a real effect on your cooling bill in July.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

We price window and door work in Summerlin two ways, so you can see exactly what you’re paying for. Full replacement runs $4,500 – $15,000 for standard units and $8,000 – $25,000 for impact-rated glass. Single-part and small-scope repairs are quoted line by line: the part, the labor, and any disposal, all on one written sheet before work starts.
What moves the range: unit count, glass package (impact versus standard), frame material, and whether the opening needs reframing or just a swap. Summerlin’s sun exposure and heat cycling push many owners toward impact-rated glass, which is the biggest single cost driver on the page.
| Scope | Installed Range |
|---|---|
| Window replacement (standard) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Single-part repair (balance, bead, seal) | Quoted line by line, written before work |
Every completed job is covered by the 365-Day Done Right Promise: if the work fails inside a full year, we return and correct it at no charge. One scope note: we order parts to your unit’s spec and carry none on a truck, so the timeline is set by the part, not a shelf.
DIY or Call Us?
Some checks are safe for a homeowner. Reading the glass label, measuring the visible glass and frame depth, and noting whether the sash drifts or the seal has fogged are all things you can do with a tape measure and a phone camera. If you can identify the series and the symptom, you’ve done most of the diagnostic work.
What we’d steer you away from is prying glazing beads or pulling a sash out of its frame to chase a balance. Window glass under load is heavy and sharp, and a sash that lets go mid-removal is a genuine injury risk. Impact glass is heavier still. There’s no DIY path here worth the downside, and a wrong-size part ordered online just delays the fix.
Call (844) 588-0072 and we’ll read your label with you, tell you whether it’s a repair or a replacement, and put a written price in front of you before anything gets ordered.
FAQs

Plan on 15 to 20 years for the window unit and 8 to 12 for moving parts like balances and weather seals in Summerlin’s climate. Heat cycling and intense sun age seals faster here than in milder regions, so the sealed glass unit often gives out before the frame does.
Yes, in many cases. A failed balance, weather seal, or glazing bead is a repair, not a replacement, and it’s the cheaper path. Fogged sealed glass units can often be swapped without replacing the whole window. Call (844) 588-0072 and we’ll tell you which side of that line your unit is on.
Most single-unit repairs are done in a few hours, and a full replacement typically takes one to two days depending on unit count. The honest answer depends on your part: because we order to spec and carry no stock, the part’s lead time sets the start date. Estimates are free and the written price is firm.
We start from your unit’s label and match series, balance rating, and glass package, defaulting to OEM when the manufacturer warranty still applies and to a documented aftermarket equivalent once it lapses. We don’t guess at fit and we don’t carry parts on a truck, so what arrives is matched to your window.
No. Every Bradford job gets a written price before any work begins, and no numbers move at the door. If we open a unit and find something outside the quoted scope, we stop, explain it, and re-quote in writing before proceeding. That’s The Garrison Standard. We also service KraftMaid, Cambria, and Silestone cabinetry and surfaces if a Summerlin project touches more than windows.
Windows and doors are one part of a whole-home scope for some Summerlin owners and the whole job for others. Either way, the plan is the same: a live person answers the phone any hour, we give you a written price before any work starts, and every completed job is backed by the 365-Day Done Right Promise. Call (844) 588-0072 for a free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












