







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Roofing: The Summerlin Owner’s Guide
If a piece of your Mr-Glass roofing system has failed, we install and repair Mr-Glass-compatible roofing in Summerlin, and a roof repair typically runs $400 – $1,800 while a full roof replacement runs $8,000 – $20,000 depending on the assembly your home uses. Mr-Glass panels and profiles are a recognizable spec, and the fix usually comes down to matching the right part to the exact series on your roof. Most Summerlin owners don’t spot the problem until water shows up somewhere it shouldn’t: a stain on a ceiling in The Ridges, grit in a gutter after a wind event, or a panel that’s visibly lifting above the ridge line while the rest of the roof looks fine. That’s usually the first sign a fastener, seal, or panel edge has given out.

Which Mr-Glass Models This Apply To
Mr-Glass roofing turns up across several panel and profile lines, and the part that fits one series almost never fits another. Before we order anything, we identify the assembly from the panel profile, the panel thickness, and the fastener spacing stamped or visible at the lap. The label on the underside of a panel, the ridge cap, or the original install paperwork is the fastest way to confirm the series. If there’s no label, we measure the panel width and profile height and match those to known Mr-Glass specs rather than guessing. That matching step matters more than homeowners expect: a panel that’s a fraction off in profile won’t seat cleanly at the lap, and the leak returns after the first hard monsoon. When it comes to OEM versus aftermarket, the OEM part is the surest fit, but a quality aftermarket equivalent with the same profile spec is a legitimate option and often costs less. We walk you through both, with the trade-off spelled out, before you commit to either. We’re an independent service provider in Summerlin and not affiliated with Mr-Glass, so our recommendation is based on what fits your roof, not on what a manufacturer wants us to sell.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Roofing Is Failing
Here’s what a failing Mr-Glass roof looks like before it becomes a ceiling repair, and what’s actually going on underneath each symptom.
- Water staining on a ceiling or wall below a panel seam. The seal or fastener at that lap has failed and water is tracking along the panel underside. Catching it at the stain stage usually keeps the repair small.
- Panels lifting or flapping at the edge or ridge. Fasteners have backed out or the clip has lost grip, and wind is getting under the panel. Left alone, that panel can tear free in a desert wind event.
- Rust streaks or corrosion at fasteners and cut edges. Summerlin’s intense UV and dry-then-wet cycles wear on sealants and exposed metal edges faster than most owners expect. Corrosion at a fastener point is a leak waiting to happen.
- Grit, granules, or debris collecting in gutters. The panel coating or sealant is breaking down and shedding. It’s the earliest warning sign and the cheapest one to act on.
- Daylight visible through the roof deck from inside the attic. A panel, flashing, or penetration has opened up. This one gets checked the same week, not the same month.
In Summerlin, the pattern we see most often is fasteners and sealant aging out after several years of sun and heat, long before the panels themselves are done. The panels hold up; the small parts around them don’t. That’s the failure to watch for.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest price picture for Summerlin, so you can plan before anyone shows up.
| Scope | Typical Installed Range |
|---|---|
| Roof repair (isolated part, seal, fastener, flashing) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
The range is driven by which part failed, how many panels are involved, roof pitch and access, and whether the underlying deck or flashing needs attention once we open it up. Parts and labor are itemized on the written price, so you see the part cost and the labor cost separately, not one lump number. Every completed repair comes with our 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we return and correct it at no charge. That’s The Garrison Standard in practice, and the guarantee is in your hand before we leave.

DIY or Call Us?
Some of this you can check yourself safely. Walk the perimeter and look up at the ridge and edges for lifting panels. Look in the gutters for grit buildup. From inside the attic, check for daylight and water stains along the panel seams. Take photos and note what you see. What we don’t recommend is climbing onto the roof to reseat panels or refasten parts yourself. Roof work means height, and a fall from a pitched Summerlin roof is a serious injury, so that part belongs with a trained professional. Panel edges and fasteners also need the right spec to hold, and a wrong fastener can void the fit and bring the leak back. If you’ve spotted anything on that list, call us at (844) 588-0072 and we’ll take a look and give you a written price.
FAQs

The panels themselves typically hold up for years, but the fasteners and sealant around them age faster in Summerlin’s sun and heat and are usually the first parts to fail. Expect fasteners and seals to need attention well before the panels do, which is why a small repair caught early stays cheap.
Often yes. A single failed seal, fastener, or flashing is usually repairable in the $400 – $1,800 range without touching the panels. If multiple panels or the underlying deck are involved, replacement makes more sense, and we’ll tell you plainly which one you’re looking at.
A single-part repair is typically a short visit, often finished the same day. A larger panel or section replacement runs longer, and we give you the time estimate in writing with the price before we start.
We identify the exact series from the panel profile and any visible label, then match the compatible part, OEM or a quality aftermarket equivalent with the same spec. You get the sourcing choice and the price in writing before we order, and if it’s outside our documented material roster, we tell you that up front. We also work with KraftMaid, Cambria, and Silestone on interior projects, but for roofing we stick to the verified roof spec.
No. You get a written price before work begins, and it doesn’t move at the door. Bradford Remodeling Co Summerlin runs on The Garrison Standard: documented scope, fixed written pricing, and the 365-Day Done Right Promise on the finished work.
If you’re in Summerlin and a part of your Mr-Glass roof has failed, don’t wait for the stain to spread. Call Bradford Remodeling Co Summerlin at (844) 588-0072 to schedule your free estimate. You’ll get a written price, a clear scope, and a crew that shows up on time and leaves the site squared away.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












