







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Driveway & Pavers: The Summerlin Owner’s Guide
We install Moen-compatible driveway and paver systems in Summerlin, and a full paver driveway typically runs $7,000 – $18,000 installed, with small repair and reset work priced far below that. When you call (844) 588-0072, a live person answers and we get a free written estimate on the calendar. We’re an independent service provider, not affiliated with Moen, so our job is matching the right part to your assembly and doing the install by the book.

Owners usually find the problem the same way: a paver edge lifts after a winter freeze-thaw, a joint line wanders, or water starts pooling against the garage apron. In Summerlin’s caliche-heavy soil, a base that wasn’t excavated and compacted correctly shows itself fast once the monsoon season hits. Moen is best known for plumbing fixtures, so if you landed here hunting for a Moen-brand paver or drain component, read the next section carefully before you order anything.
Which Moen Models This Applies To

Here’s the compatibility gotcha worth knowing up front: Moen manufactures faucets, shower valves, and rough-in plumbing components. It does not make driveway pavers, base aggregate, or edging. What we see in Summerlin are Moen outdoor hose bibbs, drain assemblies, and rough-in valves set into driveway aprons and paver borders, plus Moen fixtures tied to exterior drainage. If you’re trying to match a genuine Moen paver, there isn’t one, and any listing that says otherwise isn’t what it claims to be.
To identify what you actually have, look for a stamped model number on the valve body or the bibb flange, usually a four-digit code starting with a series prefix. Measure the connection: Moen outdoor bibbs commonly run 1/2-inch or 3/4-inch MPT, and the rough-in valve bodies behind a paver wall often sit at a fixed 4-inch or 6-inch spread. Write those numbers down before you call anyone.
On OEM versus aftermarket: for a hose bibb or drain valve, an OEM Moen cartridge or valve body is worth the small premium because the tolerances match your existing rough-in. For pavers, base, and edging, there’s no Moen equivalent, so we specify real hardscape product. Bradford works from a documented roster that includes Belgard and Unilock pavers, plus KraftMaid, Cambria, and Silestone for interior work, so materials are traceable to manufacturer specs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Driveway & Pavers Is Failing
These are the symptoms Summerlin owners describe, and what each one actually means.
- Paver edges lifting or rocking. The base beneath them has settled or wasn’t compacted to depth. Once one paver rocks, water gets under it and the failure spreads along the joint line.
- Water pooling at the garage apron or a Moen hose bibb. A rough-in valve or bibb flange is sitting proud of the paver surface and trapping water. Left alone, that pooling undermines the base and can wick into the wall plate.
- A Moen outdoor bibb that drips or won’t shut off. The internal cartridge or seat has worn. In Summerlin’s hard water, mineral scale builds on the seat and a bibb that dripped last spring will drip harder this one.
- Wandering or wide joint lines. Sand has washed out of the joints or the edge restraint has failed. Without a proper edge, pavers creep outward season after season.
- Sunken or heaved sections after a freeze. Water got into the base and expanded. In Summerlin’s high-desert swings, a base that drains poorly will heave and settle within a couple of seasons.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Summerlin, a full paver driveway installation runs $7,000 – $18,000 installed. Smaller jobs land lower: concrete driveway installation is $4,500 – $12,000, asphalt paving is $3,500 – $9,000, driveway replacement is $5,000 – $14,000, and driveway sealing is $250 – $700. A paver patio or border repair sits in the $3,500 – $11,000 range depending on square footage.
What drives the number: square footage, how deep the failed base has to come out, edge restraint and drainage correction, and whether a Moen bibb or drain valve has to be reset or replaced while the pavers are open. Parts and labor are quoted as separate line items. Every project carries a written price before any tool comes out, and the work is covered by the 365-Day Done Right Promise: if it fails inside that year, we return and correct it at no charge.

DIY or Call Us?
You can safely check a few things yourself. Look for the stamped model number on your Moen valve or bibb. Note where water pools, and take a photo of any lifted or rocking paver before you touch it. Turn the bibb on and off to confirm whether it drips.
Where DIY goes wrong: lifting pavers to “just peek” at the base resets the very bedding that holds the surface flat, and once the interlock is broken, the base has to be recompacted, not patched. Reseating a Moen rough-in valve or bibb below the paver grade means shutting off the supply and getting the flange to sit flush, and a valve set proud of the surface will just pool water again. Water against a foundation or wall plate is a slow problem, not an outdoor cosmetic one, so we don’t recommend chasing it yourself.
Call (844) 588-0072 and a live person picks up, any hour. We’ll give you a free written estimate, matched to your actual model and your actual grade. Our technicians have up to 22 years of experience, and every crew is background-checked and uniformed, so you know who’s on site.
FAQs

A properly based paver driveway lasts 25 to 30 years in Summerlin’s climate, and a Moen outdoor bibb cartridge typically runs 8 to 12 years before hard-water scale shortens its life. The pavers outlast the base if the base wasn’t compacted right, which is where most early failures start. Call (844) 588-0072 for a free assessment of what you actually have.
Often yes. A single failed section, a wandering joint line, or a dripping Moen bibb often repairs well below full replacement cost, and we’ll tell you honestly when a reset and reseal does the job. When the base itself is failing across the whole drive, patching just moves the problem down the line. Call (844) 588-0072 and we’ll quote both paths in writing.
A Moen bibb or drain valve swap typically takes a couple of hours; a full paver driveway install runs several days depending on square footage and how much failed base comes out. Plan on a short job for a valve and a longer window for a full drive. Call (844) 588-0072 for a schedule that fits your week.
We match your stamped Moen model number to the correct OEM cartridge or valve body, and specify pavers from documented manufacturers like Belgard and Unilock. We don’t carry parts on a truck or hold stock, so the right part is ordered to your model after the free estimate confirms what’s failing. Call (844) 588-0072 and we’ll start with the number stamp.
Whether it’s a failing Moen bibb set into your paver border or a Summerlin driveway that’s settling at the apron, the first step is a free written estimate with a real range in dollars and a clear scope. Bradford Remodeling Co Summerlin is held to The Garrison Standard, part of the Garrison Partners family, and every project gets a signed written guarantee in your hand at close. Call (844) 588-0072 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












