







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Summerlin Owner’s Guide
We remodel bathrooms built around KraftMaid cabinetry, and in Summerlin a full bathroom remodel typically runs $9,000 – $28,000 installed. That covers removal, rough-in corrections, waterproofing, tile, fixtures and setting new or replacement KraftMaid vanities and storage. A smaller bath lands closer to $5,000 – $12,000. We don’t claim to stock KraftMaid parts and we don’t carry cabinet components on a truck; we source what your model needs and install it under a written price.

Most Summerlin owners find the problem the same way. A vanity door that used to close flush starts dragging on the bottom rail. The soft-close hinge stops catching and the door swings loose. Or a drawer box in a 12-year-old KraftMaid vanity gives out and the whole cabinet feels like it’s coming apart. In this climate, that’s usually not a single broken part. It’s a 2004-era cabinet facing Las Vegas Valley dryness, and heat cycling that loosens fasteners and dries out hinge dampers a lot faster than the manufacturer’s charts suggest.
Which KraftMaid Models This Applies To

KraftMaid builds its bath and kitchen cabinetry around a handful of door styles and construction lines, and the parts don’t cross over cleanly. A replacement door or drawer front has to match the series, the overlay (how much of the cabinet frame the door covers), and the hinge boring pattern on that particular run. We’ve seen Summerlin homeowners order a “KraftMaid hinge” online only to find the screw pattern was drilled for a different overlay. That’s a $15 part and two weeks lost.
To identify what you have, look inside the cabinet for the manufacturer label, usually on the back panel or the inside of a side wall. Note the door style name and the model or spec code. Then measure: door width and height to the nearest 1/16 inch, the overlay (the gap between door edge and cabinet opening), and the center-to-center distance between hinge screw holes. Those three measurements are what actually match a part.
On the OEM-versus-aftermarket call, here’s our honest read. For structural parts, drawer boxes, hinges and slides, an OEM KraftMaid part is worth the wait and the markup because the boring pattern and finish match exactly. For pulls, knobs and non-structural trim, a quality aftermarket equivalent from a name brand like Kohler or Moen on the fixture side is fine. We’re an independent remodeling contractor, not affiliated with KraftMaid, and we source parts to match your specific cabinet rather than guessing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Doors that drag or won’t stay closed. The hinge damper has dried out or the hinge plate has shifted. In Summerlin’s low humidity, soft-close mechanisms lose tension years before their rated life.
- Drawer boxes that stick or come off the track. The slide or the box bottom has warped or the screws have pulled out of the cabinet frame. This is common where the vanity sits against an exterior wall.
- Peeling finish or swollen edges near the sink and shower. Moisture has gotten under the finish or into a particleboard edge. Once the substrate (the board under the finish) swells, it won’t go back.
- Sagging shelves or a loose cabinet box. The fasteners holding the cabinet to the wall have loosened, or the shelf pins have worn their holes. A loose box needs to be re-secured before it pulls free.
- Water staining inside the cabinet. A slow supply-line or drain leak is the usual cause. The cabinet finish is the symptom, and the leak is the real problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full bathroom remodel in Summerlin, expect $9,000 – $28,000 installed. A small bathroom remodel runs $5,000 – $12,000. If you’re replacing just the vanity, a bathroom vanity installation is $800 – $3,000. For a walk-in shower, $4,500 – $12,000. A tub-to-shower conversion is $3,500 – $10,000, and a shower replacement alone is $3,000 – $8,500.
What moves the number is the same on every KraftMaid bath job: how much of the cabinet is salvageable, whether the rough-in (the plumbing and electrical behind the wall) needs to move, tile area, and whether we’re matching an existing KraftMaid door style or switching to a new one. You get a written line-item price before any work starts, and there are no change orders at the door. Every finished project carries the 365-Day Done Right Promise. If the work fails within that year, we come back and correct it at no charge.

Fixtures and surfaces can pair with Cambria, Silestone and Kohler if you’re replacing more than the cabinet.
DIY or Call Us?
You can safely do a few things yourself. Open the cabinet, find the label, take the three measurements we listed above, and tighten a loose hinge screw or pull with a screwdriver. You can also check for leaks under the sink with a dry paper towel.
Where DIY goes wrong is the work behind the parts. Re-securing a loose vanity to the wall, correcting a swollen substrate, or resetting rough-in plumbing and electrical isn’t a swap, and mistakes there mean water damage or worse. Bathroom electrical and plumbing work should go to a licensed professional. A trained tech has years of experience with these specific KraftMaid cabinet lines and knows the overlay and boring gotchas before ordering. Call (844) 588-0072 and we’ll give you a written price before anything starts.
FAQs

Ten to fifteen years for the cabinet and hardware is realistic in Summerlin’s climate, and hinges and slides often go first at the 8- to 12-year mark. The Las Vegas Valley’s dry air and indoor heat cycling wear dampers and dry out finishes faster than a humid climate does, so hardware tends to fail well before the cabinet box.
Sometimes, yes. A single hinge, slide or pull can often be replaced without touching the cabinet, and that’s the cheapest path when the box and finish are still sound. Swollen substrate, a warped door or a leaking supply line usually means replacement, not repair, because the damage is already in the material.
A vanity or cabinet swap is a few days; a full bathroom remodel in Summerlin usually runs two to four weeks depending on tile area and whether the rough-in moves. We give you the schedule in writing up front, and we don’t promise same-day work on a planned remodel because that’s not how a job done right gets done.
We identify your series, overlay and hinge boring from the cabinet label and measurements, then source the matching part, OEM where the boring pattern matters. We’re an independent provider, not affiliated with KraftMaid, so we’re matching to your cabinet rather than selling you a generic part. Call (844) 588-0072 for a free estimate and a written price.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












