







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Bathroom Remodeling: The Summerlin Owner’s Guide
We install Kohler fixtures and Kohler-compatible parts as part of full bathroom remodeling in Summerlin, and a standard remodel here falls in the $9,000 – $28,000 range. A simple fixture-only swap is much less and a full gut is more, so the written price always depends on scope. Most Summerlin owners don’t go looking for Kohler parts at all. They land here after a cartridge starts dripping at 2 a.m., a flush valve stops sealing, or a finish on a faucet starts flaking, and they need to know what the right replacement is, what it costs, and who installs it without surprises. That’s what this page is for.

Which Kohler Models This Applies To
Kohler builds bathroom fixtures across a wide spread of lines, and the part you need is tied to the specific model, not the brand name alone. On faucets, the faucet body has a model number stamped on the shank or printed on a tag under the handle, and the cartridge is matched to that number, so a Devonshire cartridge will not fit a Fairfax faucet even if the handles look similar. On toilets, look for the model number on the tank or the inside of the lid; a fill valve and flush valve are common across many models, but a canister-style flush tower is specific to certain series. On shower valves, the rough-in valve (the body behind the wall) and the trim (the handle and escutcheon you see) are separate numbers, and matching one without the other is the most common compatibility mistake we see. Before replacing, measure the cartridge length and diameter and check the model tag. For OEM versus aftermarket: original Kohler parts cost more but fit first time, while quality aftermarket equivalents can work when the model number matches and the seller confirms fitment. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Kohler.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Bathroom Remodeling Is Failing
Owners usually find out something’s wrong through a small set of symptoms. Here’s what each one tells you about the part behind it.
- Constant drip from the spout: A failed cartridge or seat lets water pass even when the handle is closed. A steady drip wastes water and will stain a vanity top, so it’s worth fixing early.
- Handle turns hard or feels loose: Worn cartridge O-rings or a stripped stem. The mechanism wears unevenly, so the handle feels sticky at the quarter-turn or wobbles before the part fails.
- Toilet runs after flushing: A bad flapper or fill valve, or a canister seal that no longer seats. The toilet refills, then runs again, which usually points to a valve rather than the tank itself.
- Flaking or pitting finish: The plated finish on some faucets wears with age, hard water, and cleaning products. Once the chrome chips, corrosion starts underneath and the part looks worse than it works.
- Water pooling at the shower valve: A worn cartridge seal or a loose trim allows water behind the wall. In Summerlin’s dry climate, a slow leak can go months without showing on the surface while the substrate behind the tile softens.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Summerlin owners, the parts and labor picture looks like this:
| Scope | Typical installed range |
|---|---|
| Bathroom remodel (full) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the number up or down: fixture brand and model, whether the rough-in valve needs replacing or only the trim, tile and substrate condition, and whether the drywall or waterproofing needs work once the old fixture comes out. We give you a written price before any work starts, itemized by part and labor, so you know what the cartridge costs versus the install. The work is covered by the 365-Day Done Right Promise, a full-year written guarantee that we return and correct the work at no charge if it doesn’t hold. No change orders unless you approve them in writing.
DIY or Call Us?
Some of this is safe to check yourself. You can shut off the water, remove the handle, look for the model tag, and measure the cartridge. You can read the tank lid and confirm the toilet model. The honest line on the dangerous part: anything behind the wall on a shower valve, and anything involving rough framing or a compromised substrate, is not a homeowner job. Cutting into a wall to replace a rough-in valve risks a slow water leak behind tile that you won’t see until it’s done real damage, and a sprained joint from forcing a corroded cartridge is how a small swap becomes a bigger bill. When in doubt, call us at (844) 588-0072 and we’ll talk through the scope. A live person answers 24/7. Estimates are free and you’ll get the price in writing.
FAQs

How long does a Kohler part last in Summerlin?
A cartridge in a kitchen or bathroom faucet typically lasts 10 to 15 years with normal water, though Summerlin’s hard water shortens that. Toilet fill and flush valves often go 5 to 10 years. A slow drip means it’s time, not that the brand is weak.
Can a failed Kohler part be repaired instead of replaced?
Often yes. A worn cartridge can sometimes be cleaned or reseated, and a flapper or fill valve is a straightforward swap. A cracked valve body or a rough-in valve behind tile has to be replaced. Call us and we’ll say which it is before you buy anything.
How long does the swap take?
A faucet cartridge or fill valve is usually an hour or two. A rough-in valve replacement or shower valve job can run a half day to a full day depending on access and what’s behind the wall. You’ll know the timeline in the written estimate.
How do you source the part?
We confirm the Kohler model number, order the correct OEM or qualified replacement, and match it before we arrive. We don’t claim to carry stock on a truck; the part is sourced for your specific fixture. Bradford Remodeling Co Summerlin also works with names like KraftMaid, Cambria and Silestone for the rest of the bath, so everything in the room is specified and traceable.
For a written price on your Kohler bathroom remodeling in Summerlin, call (844) 588-0072 for a free estimate. Every project gets a documented scope, background-checked and uniformed technicians, and the 365-Day Done Right Promise in your hand at close.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












