







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Summerlin Owner’s Guide
If you’re searching for Jerith kitchen remodeling in Summerlin, the short answer is this: we install Jerith-compatible kitchen components and handle the cabinet, countertop, and backsplash work that surrounds them, with installed kitchen remodels in Summerlin typically running $14,000 – $45,000 depending on scope, and we don’t promise same-day work on a planned remodel because nobody remodels a kitchen in an afternoon. What we do promise is a written price before any tool comes out.

Owners in Summerlin usually find us in one of two ways. Either a cabinet run that was fine two summers ago now won’t sit flush, or a surface near a Jerith enclosure has started to lift along the seam. In The Ridges and Red Rock Country Club, we regularly see millwork that’s moved because the interior humidity swings hard between June and September and the substrate underneath was never sealed for it. That’s the symptom picture. The fix depends on what’s actually failed, and that starts with matching the part to your model.
Key Takeaways
- Installed kitchen remodels in Summerlin: $14,000 – $45,000; small kitchens $9,000 – $20,000.
- Cabinet installation alone runs $4,000 – $13,000; countertops $2,000 – $6,500.
- Written price before work starts. Always. No numbers that move at the door.
- 365-Day Done Right Promise: if the work fails inside a year, we come back and correct it at no charge.
Which Jerith Models This Applies To

Jerith builds in series lines, and the component you need is keyed to the series, not just the rough opening. Before we order anything, we identify your model from the manufacturer label, which on most Jerith units sits on the vertical stile or inside the frame return, and we measure the actual opening rather than trusting a thirty-year-old builder’s drawing. A fraction of an inch matters here. Jerith’s frame profiles have changed across production runs, so a component that fits one series will not seat correctly in another even when the opening measures the same.
That’s where most online parts shopping goes wrong for Summerlin owners. The photo looks right, the dimensions look close, and the part shows up a half-inch off. We confirm fit against the label first, then order.
OEM or a quality aftermarket equivalent?
For Jerith specifically, OEM is worth it when the part is visible and structural. For concealed hardware and trim, a documented aftermarket equivalent from a name-brand line often performs identically at a lower price, and we’ll tell you which is which rather than defaulting to the expensive option. To be clear about who we are: Bradford Remodeling Co Summerlin is an independent service provider, not affiliated with Jerith. We also work with KraftMaid, Cambria, and Silestone cabinetry and surfaces where the surrounding kitchen needs it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Kitchen Remodeling Is Failing
- A gap opens along the wall or floor seam. The substrate has moved or swelled, usually from humidity cycling or a slow leak behind the unit. The gap is the symptom, not the problem.
- Doors or drawers no longer sit flush. The frame has racked, often because the rough opening was never shimmed square when it went in. This is common in Summerlin homes built during the early-2000s boom.
- Water staining or soft wood at the base. Moisture is getting in from a failed seal or a rough-in that wasn’t flashed correctly. Ignore it and the framing behind it goes soft.
- The unit racks when you lean on it. Fasteners have pulled or the anchoring was undersized for the wall assembly. That’s a safety issue, not a cosmetic one.
- A part visibly cracks at a joint or hinge point. Age and UV exposure in the Nevada sun degrade some materials faster than the manufacturer’s spec assumes. This is a replacement, not a repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what kitchen work runs in Summerlin, installed, with the price written down before we start:
| Scope | Installed Range (Summerlin) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the number: cabinet box count and whether the layout changes, surface material, and how much of the substrate has to be repaired before new work goes on top. A part swap that exposes water damage will move the price, and we tell you that before we touch it, not after. Every completed job carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. Written price first, always.
DIY or Call Us?
Some of this you can safely check yourself. Read the label on your Jerith unit, measure the opening, photograph any gap or stain, and note whether the unit racks when you push on it. That’s information, not repair.
Where DIY goes wrong is the removal and re-install. Kitchen units carry weight, they’re often tied to rough-ins and framing you can’t see, and a unit that racks can come down on you or bring a wall assembly with it. If you find water staining or significant racking, stop and call. We’d rather look at it now than replace the framing later. Call (844) 588-0072 and a live person picks up, day or night.
FAQs

Expect somewhere in the range the manufacturer specifies, and plan on the short end if the unit sees direct sun or a poorly ventilated kitchen. Nevada’s UV and dry-to-humid swing shorten the life of wood and composite parts unless the substrate was sealed correctly at install. Call (844) 588-0072 for an exact quote on replacement: estimates are free.
Sometimes, and we’ll tell you honestly when it can. Loose fasteners, small gaps, and surface blemishes are repairable. Cracked joints at hinge or load points and any part with water damage behind it are replacement, full stop. Call (844) 588-0072 and we’ll give you a straight answer.
A single component swap is often a half-day to a full day once the right part is in hand; a broader kitchen remodel runs several weeks. We schedule it, tell you the window in writing, and don’t leave the site a mess. Call (844) 588-0072 to schedule your free estimate.
We identify your Jerith model from the label, confirm the fit against the actual opening, then order the correct component through the manufacturer or a documented aftermarket line. We don’t carry parts on a truck and we don’t guess. Call (844) 588-0072 for a written price before anything is ordered.
Ready to get squared away? Bradford Remodeling Co Summerlin shows up background-checked and uniformed, answers the phone with a live person around the clock, and hands you a signed written guarantee when the job closes. Call (844) 588-0072 for your free estimate. Our technicians have up to 22 years of experience, and The Garrison Standard is behind every job we run.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












