







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Summerlin Owner’s Guide
We install Jerith-compatible driveway and paver systems in Summerlin, and the honest installed range for a full paver driveway here is $7,000 – $18,000. Smaller repairs and replacements sit well below that, and we quote every job in writing before work starts. Owners usually find the problem the same way: a section of pavers shifts underfoot after a winter rain, a border course that once locked tight starts walking outward, or the base gives way at the driveway apron where the wheels hit hardest. In Summerlin’s heat, that failure often shows up fast, sometimes within a single summer on a shallow base.

Key takeaways:
- Jerith pavers are a manufactured system; base prep and edge restraint decide whether they hold, not the paver face alone.
- Installed paver driveway in Summerlin: $7,000 – $18,000. Replacement: $5,000 – $14,000.
- Every job gets a written price before tools come out and the 365-Day Done Right Promise behind the work.
- We’re an independent service provider, not affiliated with Jerith.
Which Jerith Models This Applies To

Jerith products show up in Summerlin in a mix of paver profiles and edge systems, and the part you need depends on which one you have. The label matters more than a photo: look for the manufacturer stamp and series marking on the paver edge or on the pallet tag if you still have one, and measure a single unit’s length, width, and thickness to the nearest sixteenth of an inch. Jerith runs standard modular thicknesses, and the common compatibility gotcha is a driveway built to an older profile where the new unit is close but not identical – the color reads the same, the joint does not, and the course won’t lock the way the rest of the field does.
On the OEM-versus-aftermarket call: for a matching field repair, genuine Jerith units keep the color and joint consistent with what’s already down. For a full replacement or a section rebuild, a quality aftermarket paver that meets the same thickness and compressive spec can work and often costs less, but the base and restraint system still have to be built right or you’ll be back where you started. We walk you through both and put the choice in the written scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. The bedding layer has settled or washed out beneath the unit. This usually traces back to a thin base or a slope that sends water under the field instead of off it.
- Weeds or sand pumping up through the joints. Joint sand has eroded and the base is migrating. In Summerlin’s monsoon weeks, water finds those open joints and carries fines up and out.
- Border courses spreading or the edge restraint pulling loose. The edge restraint holds the whole field in compression. Once it fails, the pavers at the perimeter walk outward and the pattern opens.
- Low spots holding water after rain. Ponding means the base wasn’t graded to drain. This is the failure that shortens paver life fastest in the desert, because standing water and the sun’s heat cycling break down the bedding layer.
- Color fading, chalking, or a paver surface breaking apart. Sun exposure and deicing or pool-water splash wear the face. Efflorescence – a white haze – is often cosmetic, but a crumbled face is not.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed paver driveway work in Summerlin runs $7,000 – $18,000. A full driveway replacement runs $5,000 – $14,000. Sealing to protect the surface after installation or repair runs $250 – $700. If your scope touches a paver patio, that’s $3,500 – $11,000.
What moves the range: driveway square footage, whether the existing base is salvageable or has to be excavated and rebuilt, the paver profile and whether genuine Jerith or an approved aftermarket unit is used, edge restraint and drainage corrections, and haul-off of the old material. We price parts and labor separately in the written quote so nothing is buried.
Every completed job carries the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. The written price and the written guarantee are in your hand before we start.

DIY or Call Us?
You can safely check a few things yourself: pull weeds and probe the joints to see how far the sand has eroded, note any pavers that rock when you step on them, and watch where water sits after a rain. Photograph the label or measure a paver so you know the profile.
Where DIY goes wrong is the base. Rebuilding a failed section means excavating to the right depth, compacting in lifts, setting grade for drainage, and re-installing the edge restraint under compression – and a shallow base in Summerlin heat and monsoon runoff will fail again. Tearing into a sound field to fix one paver also risks cracking the neighbors. If your driveway is shifting, holding water, or losing its edge, that’s base work, not a Saturday job. Call (844) 588-0072 for a free written estimate.
FAQs

A properly built paver driveway typically lasts decades, with the base and edge restraint doing most of the work. In Summerlin’s heat and monsoon pattern, a shallow base or a missing edge restraint can shorten that to a handful of years, which is why we grade for drainage up front.
Often yes. A section rebuild – lifting the affected field, correcting the base, and re-laying with matching units – is cheaper than a full replacement and preserves the driveway you have. We tell you honestly when a repair will hold and when the base is too far gone.
A small section repair is commonly a day’s work, while a full driveway rebuild runs several days depending on square footage and haul-off. We give you the schedule in writing with the price, so you know what to expect before we start.
We match the part to your driveway’s actual profile and thickness, using the label and field measurements rather than a color guess. We confirm genuine Jerith or an approved equivalent meets the same spec and hand you the written scope before ordering anything.
We bring the same documented approach to other brands too, including KraftMaid, Cambria, and Silestone on the interior side. Bradford Remodeling Co Summerlin is an independent service provider and not affiliated with Jerith. When you’re ready to price the job, call (844) 588-0072 for a free estimate – the price is in writing and the 365-Day Done Right Promise backs the work.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












