







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Home Additions & ADU: The Summerlin Owner’s Guide
We build and finish home additions and ADUs in Summerlin using James Hardie fiber-cement siding and trim as the exterior system, and that work typically runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU. Those numbers are installed prices, written down before we start, and they include the Hardie cladding, trim, flashing and paint finish. This page is for the Summerlin homeowner whose existing Hardie exterior has started to fail on an older addition or converted space, or who is planning a new addition and wants the cladding done to James Hardie’s published spec instead of a builder’s shortcut. Owners usually find the problem the same way: a chalky white bloom on the lap siding after a summer, caulk joints pulling open at a corner, or a soft spot at the bottom course where sprinkler overspray has been hitting the panel every morning.

Key Takeaways
- James Hardie siding is fiber-cement, and in Summerlin it fails at the paint film and the caulk line long before the panel itself gives out.
- Installed additions run $45,000 – $130,000; ADUs run $90,000 – $220,000, written price before any work starts.
- Every project carries the 365-Day Done Right Promise: if it’s not done right, we come back and correct it at no charge for a full year.
Which James Hardie Models This Applies To
James Hardie’s residential exterior line breaks into a few product families, and which one you have changes what we’re matching and how we replace it. HardiePlank lap siding is the most common on Summerlin additions and comes in a set of profiles (Select Cedarmill, Beaded Cedarmill, Smooth, Sierra) with thicknesses of 5/16 inch and 7/16 inch depending on the series. HardiePanel vertical siding, HardieTrim boards, HardieSoffit panels and HardieShingle sit alongside it. The product name and profile are usually printed on the back of the panel or on the original end tag, and if that’s gone you can identify it by measuring the exposed face width (typically 6 to 8 inches on lap) and the panel thickness with a caliper. OEM Hardie replacement panels are the right call when you need a color and profile match on a visible wall; quality fiber-cement equivalents make sense on a hidden elevation or a soffit. We install James Hardie-clad work as an independent contractor and are not affiliated with James Hardie.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Home Additions & ADU Is Failing
Fiber-cement is durable, but it is not maintenance-free, and the Summerlin climate punishes two things: the paint film and every caulk joint. Here’s what failure actually looks like on an addition or ADU envelope.
- Chalky white powder on the siding. That’s the paint film breaking down under Summerlin’s UV load. Once it chalks, the fiber-cement is absorbing moisture because the coating has failed.
- Caulk joints opening at corners and trim. Movement and sun bake the caulk until it cracks. Open caulk lets water behind the panel, and behind the panel is where the damage gets expensive.
- Soft or crumbling bottom course. Sprinkler overspray and splashback wick up the lowest panel. If you can push a screwdriver into the bottom edge, the panel needs replacing, not painting.
- Paint peeling in sheets at the butt joints. This is a moisture problem, not a paint problem. It usually means the joint wasn’t flashed or gapped to James Hardie’s spec at install.
- Trim and corner boards pulling away. Fastener corrosion or missed studs on the original addition. It shows up as a visible gap between trim and siding after a few summers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Re-cladding or finishing an addition’s exterior in Summerlin with James Hardie material typically lands inside the $45,000 – $130,000 range for a full addition, and a detached or attached ADU runs $90,000 – $220,000. The range is driven by square footage, how much of the envelope is Hardie versus trim and soffit, whether the existing substrate (the sheathing under the siding) is sound, and whether we’re matching an existing profile or building a new one. Parts-plus-labor is broken out line by line in the written price: panels, trim, fasteners, flashing, caulk and finish, with labor beside each. Nothing moves once work starts. Every completed project carries the 365-Day Done Right Promise – if the work fails within that year, we return and correct it at no charge.
DIY or Call Us?
You can safely check your own exterior: look for chalk, probe the bottom course with a screwdriver, and see whether caulk joints are open. What you shouldn’t do is replace fiber-cement panels above the first floor or re-flash an addition yourself. Cutting and hanging Hardie means working at height, handling heavy panels, and getting the flashing and the water-resistive barrier right behind them – get that wrong and the envelope leaks for years before anyone sees it. Our technicians have up to 22 years of experience with this exact failure pattern in Summerlin, and we give you a written price before any work starts. Call (844) 588-0072 to schedule your free estimate, and a live person answers.
FAQs

How long does James Hardie siding last on a Summerlin addition? The panels themselves commonly last decades, but the paint film and caulk are the wear items – plan on a re-coat roughly every 8 to 12 years in Summerlin’s sun, and caulk checks every few years.
Can the failing siding be repaired instead of replaced? Often yes. If chalk and peeling are limited to the paint film and the panels are sound, a proper recoat and re-caulk fixes it. If the bottom course is soft or joints weren’t flashed, those panels get replaced. Call (844) 588-0072 for an exact quote – estimates are free.
How long does the swap take? Re-cladding one elevation on an addition typically takes a few days; a full addition or ADU envelope takes longer and we put the schedule in writing before any work starts.
How do you source the James Hardie part? We specify from James Hardie’s published product lines and match profile and thickness to what’s already on the wall, sourcing through documented manufacturer channels so the spec is traceable. We don’t claim to stock parts or carry them on a truck – we order what your project needs. Call (844) 588-0072 and a real person picks up.
We also work with KraftMaid, Cambria and Silestone on the interiors of these additions when a project turns into a kitchen or bath.
Give us a call at (844) 588-0072 for a free estimate on your James Hardie addition or ADU in Summerlin. You’ll get a written, line-item price before anything starts, a crew that shows up background-checked and uniformed, and the 365-Day Done Right Promise in writing at close.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












