







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Bathroom Remodeling: The Summerlin Owner’s Guide
Bathroom remodeling in Summerlin typically runs $9,000 – $28,000 for a full project, and we install GAF-compatible materials as part of documented, written-scope work. What makes GAF different in a bathroom? GAF is a roofing and waterproofing manufacturer first, and its underlayment and moisture-barrier products are what most Summerlin homeowners end up asking us about when a bathroom sits above a garage or below a second-floor deck. Owners usually discover the problem the same way: a soft spot at the ceiling below, a bubble in the paint at the wall-to-floor seam, or a musty smell that keeps coming back after every cleaning. Once you’ve traced it to failed underlayment or a compromised vapor barrier behind the tile, the conversation moves fast to price and scope.

Which GAF Models This Applies To

GAF isn’t a bathroom-fixture brand, so “model compatibility” here means the underlayment and waterproofing layers, not a vanity or a valve. The two GAF product lines Summerlin owners most often ask us to work around are GAF Deck-Armor (a roof-deck underlayment sometimes used on transitional or vaulted bathrooms with exposed ceiling assemblies) and GAF Tiger Paw or GAF felt underlayment rolled under tile floors in construction that pre-dates modern cement-board standards. None of these were designed as interior wet-area membranes, and that’s the gotcha: the product works, but it’s usually been applied outside its intended assembly.
To identify what’s actually under your tile, look at the paper label stapled or nailed to a joist or subfloor edge during install; most crews leave the roll wrapper in the crawl or on a framing member. If there’s no label, measure the exposed strip at a floor transition – GAF Deck-Armor runs 48 inches wide, and Tiger Paw felt is 36 inches. Older rolls may be 15-lb or 30-lb felt; the 30-lb is thicker and easier to spot once a corner lifts.
On OEM versus aftermarket: for GAF underlayment specifically, we recommend a modern sheet-applied waterproofing membrane for any interior bathroom application, because GAF’s warranty terms for its products are written around their exterior use. That’s a substitution we explain in writing before we quote. For the finishes that sit on top, we work from a documented brand roster including KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures, so every spec is traceable. We’re an independent remodeling contractor and are not affiliated with GAF.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Bathroom Remodeling Is Failing
Once the waterproofing layer under a Summerlin bathroom floor goes, the failure shows up in predictable order. Here’s what to watch for:
- Soft spot or stain on the ceiling below. Water is getting past the underlayment and reaching the subfloor and joists. The GAF layer has either cracked at a seam or was never lapped correctly over the shower curb.
- Loose or hollow-sounding tile. Grout crack over a defined area, then a tile that flexes underfoot. That’s the thinset debonding from the underlayment because the assembly has been wet for months.
- Musty smell that returns after cleaning. Mold growing on the paper face of the underlayment or the back of the drywall. Cleaning the surface doesn’t reach it, so the smell comes back within weeks.
- Grout that keeps re-cracking along the same line. Movement in the subfloor, often because water has swollen the plywood edge under the GAF layer. Regrouting alone doesn’t fix it; the substrate is the problem.
- Peeling paint or bubbling at the baseboard or wall seam. Moisture wicking up the drywall from a saturated floor assembly. By the time you see the paint bubble, the underlayment has usually been wet for a season or more.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Bathroom remodeling that addresses failed underlayment and rebuilds the floor and shower assembly in Summerlin lands in the $9,000 – $28,000 range. A smaller scope, such as a bathroom with a single failing zone and no layout change, runs $5,000 – $12,000. A walk-in shower installation with a new waterproofing assembly quoted separately runs $4,500 – $12,000; a tub-to-shower conversion runs $3,500 – $10,000.
| Scope | Typical Range |
|---|---|
| Full bathroom remodel (demo to finish) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Bathroom vanity installation | $800 – $3,000 |
What moves the number: whether the subfloor needs partial replacement after demo, whether the shower valve rough-in has to be moved, and finish level on tile and cabinetry. Every Bradford project gets a written price before work begins, and the finished work carries the 365-Day Done Right Promise. If something we installed fails inside that year, we come back and correct it at no charge. That’s in writing, not verbal.
DIY or Call Us?
What a Summerlin homeowner can safely do: check for a label on exposed framing, measure the exposed underlayment width to identify which GAF product you have, and take photos of every stain or crack before anyone touches the floor. What you shouldn’t do is pull up tile or cut into the floor assembly to “see what’s going on.” Once you crack a waterproofing layer, you’ve committed to a full rebuild whether you’re ready for one or not – and a tilted or shifted tile can take a wet saw to a finger before you’ve finished the first row.
If the diagnosis is a failed GAF underlayment or an expired waterproofing assembly, we scope the fix and give you a written price before any tool comes out. Call (844) 588-0072 to schedule your free estimate.
FAQs

Exterior-rated, correctly installed, it can run 20 to 30 years; used as an interior membrane under tile in Summerlin’s climate, expect 8 to 15 years before the seams start to fail. The difference is moisture vapor from below the slab and the daily wet cycle of a shower. If the underlayment is past that window and you’re already seeing tile movement or a musty smell, it’s worth getting a proper assessment. Call (844) 588-0072 for a free estimate.
Possibly. A single cracked tile over a dry substrate with no moisture reading below can often be patched and regrouted. Once the underlayment is wet or the subfloor has swelled, patching won’t hold and replacement is the honest answer. We scope it both ways and put the number in writing so you can see the difference. Call (844) 588-0072 for a free estimate.
A Summerlin bathroom remodel that includes new underlayment, shower tile, and vanity typically runs two to four weeks once materials are on site; a smaller single-zone scope runs about one week. Special-order cabinetry and countertop lead times can extend it. Call (844) 588-0072 to schedule your free estimate and get a written timeline.
We work from a documented roster of name-brand manufacturers, and for a GAF underlayment scenario on a bathroom floor we’ll quote a modern sheet-applied waterproofing assembly appropriate to the wet area, with the specification written into the scope. We do not carry stock on a truck; every part is ordered for your project and specified by name. Call (844) 588-0072 for a free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












