A Bradford company - serving Summerlin, NV
An open living room and dining area after a whole-home remodel
E
ES Windows · Summerlin

ES Windows Windows & Doors in Summerlin, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Summerlin
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A finished backyard cottage with a small covered porch
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Windows & Doors: The Summerlin Owner’s Guide

We install and service ES Windows products across Summerlin, and installed window and door work here typically runs $4,500 – $15,000 for a window package and $8,000 – $25,000 for impact-rated installation. Every job starts with a written price before any work begins, backed by our 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge.

Two construction workers installing new luxury vinyl plank flooring in Summerlin, NV

Call (844) 588-0072

Owners rarely notice the failure on a calm day. It shows up as a door that won’t sit flush once summer heat sets in, a window crank that spins without grabbing, or condensation trapped between panes after a windstorm rolls off the Spring Mountains. The glass and frame are usually fine; the hardware, seals, gaskets, rollers, and balances are what go first. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with ES Windows, but we know the product line and the parts that match it.

Which ES Windows Models This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

ES Windows builds a range of vinyl and aluminum window and door lines: single-hung, casement, sliding, and patio door systems. The exact series isn’t always printed where you’d expect. Look for the certification label (often a small NFRC sticker on the jamb or sash edge) and the etched glass bug in one corner that gives you a legible code. Failing that, measure the visible glass and the rough opening; those two numbers narrow the part family far faster than the model name does.

For Summerlin homes, the compatibility gotcha we see most often is restrike and hinge placement on patio doors. ES Windows hardware sets changed across production runs, so a handle bought by shape alone will bolt on but won’t pull the door tight against the weatherstrip. The tolerance is small: a sixteenth of an inch in the wrong spot and you get daylight leaking through the seam. On the OEM-versus-aftermarket decision, the plain truth is that a factory part matches exactly and costs more; a quality aftermarket equivalent from a known hardware maker often costs 30 – 40% less and holds up fine, provided the spec sheet matches on roller diameter, pivot height, and latch throw depth. We write down which one we’re using and why before we order. For other fixtures in these same homes, we also work with KraftMaid, Cambria, and Silestone.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Windows & Doors Is Failing

Here’s what a failing assembly actually looks like, and what’s causing it underneath:

  • Condensation or fog between the panes. The insulated glass seal has broken and moisture is getting in. It won’t clear on its own and the glass unit needs replacing, not just wiping.
  • A crank that turns freely with no movement. The operator arm or the gearbox has stripped. Common on casement windows after several seasons of opening and closing against a slightly out-of-square frame.
  • Sash that drifts down or won’t stay open. The spiral or block-and-tackle balance has lost tension. This is the single most common failure we see on single-hung ES Windows units in Summerlin homes.
  • A sliding patio door that drags or jumps the track. Rollers are worn flat or the track has filled with grit and hard-water scale. In Summerlin’s dust and heat, rollers wear faster than the manufacturer’s spec suggests.
  • Daylight or a draft at the seam when closed. Weatherstripping has compressed and gone brittle, or the strike has shifted. Often a latch-strike adjustment, not a whole-door problem.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled kitchen with a waterfall island and wood cabinets

Here’s the honest price range for Summerlin, and what sits inside it:

Work Installed Range
Window Replacement (per project) $4,500 – $15,000
Impact Window Installation $8,000 – $25,000

What drives the number up or down: the number of units, whether it’s a standard or impact-rated assembly, and whether the frame stays or the whole unit comes out. A single balance or operator swap sits at the low end; a full impact-rated window package with new frames sits at the high end. Parts and labor are shown as separate line items so you can see exactly what you’re paying for. Every completed job carries the full-year written guarantee, and you leave with the signed guarantee in hand.

DIY or Call Us?

You can safely check a few things yourself: look for the NFRC label, wipe and inspect a track for grit, check whether weatherstrip has gone brittle, and note where a door is dragging. That information helps us quote accurately over the phone.

Where it goes wrong: replacing a balance, an operator, or a sealed glass unit means removing and resetting a sash or panel under tension in a frame that has already settled. Done wrong, the sash drops, the glass cracks, or the door never seals again, and now you’re paying for a repair on top of the original job. This is the part where calling in someone who’s done it hundreds of times saves money, not costs it. Give us a call at (844) 588-0072 and we’ll tell you straight whether it’s a swap or something bigger.

FAQs

A wood double vanity with two mirrors after a bathroom remodel

How long do ES Windows parts last in Summerlin? Most hardware parts last roughly 10 – 15 years, but Summerlin’s heat and dust shorten that on rollers and weatherstripping, which often wear out in 7 – 10 years. If your windows are past that mark, it’s worth a check.

Can it be repaired instead of replaced? Often, yes. A balance, operator, latch, or roller can usually be swapped without touching the glass or frame, which keeps the cost down and the job quick. Full frame or glass failure is the case where replacement makes more sense.

How long does the swap take? A single hardware part like a balance or operator is typically a same-visit job of an hour or two. A full window unit or patio door runs longer and depends on how many you’re doing; we’ll give you a clear time window in the written estimate.

How do you source the part? We pull the model and spec from your label and measurements, then match it against factory or a documented quality-equivalent hardware maker. We don’t stock parts on a truck; we order the right one and confirm the spec with you before installation, so nothing gets swapped on a guess.

Call (844) 588-0072 to schedule your free estimate. Our team works with a live person answering the phone 24/7, gives you a written price before any work starts, and stands behind every job with the 365-Day Done Right Promise. Our technicians have up to 22 years of experience.

Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A powder room with botanical wallpaper and a stone sinkAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in niche

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Summerlin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Summerlin team

A local vetted partner works across Summerlin and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 588-0072
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Bradford Remodeling Co Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch