







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Summerlin Owner’s Guide
Kitchen remodeling built around ES Windows products in Summerlin typically runs $14,000 to $45,000 installed, with most single-wall and galley projects landing in the low $20s and full layouts with island work reaching the high $30s. Smaller footprint kitchens run $9,000 to $20,000. We’re an independent service provider, not affiliated with ES Windows, and we work with their integrated kitchen components alongside KraftMaid, Cambria, and Silestone on the finish side.

Owners usually find the problem the same way: a drawer box that won’t close flush against the Summerlin heat, a door that’s stopped latching square, or a corner that’s gone dark where the panel joint has started to separate. You notice it on a Tuesday, you live with it for a month, then you start pricing the fix. That’s where most Summerlin homeowners land on this page.
Key Takeaways
- ES Windows kitchen components are spec’d to the cabinet run, not the room – matching the series and width matters more than the color.
- Summerlin’s dry, high-desert air (single-digit humidity most of the year) is the top driver of joint separation and hinge drift on these systems.
- Installed remodeling around ES Windows parts in Summerlin: $14,000 to $45,000, written before work starts.
- The 365-Day Done Right Promise covers the labor, not just the part, for a full year after close.
Which ES Windows Models This Applies To

ES Windows built kitchen systems across a range of series lines, and the part you need is tied to the series stamp on the inside face of the cabinet door or drawer front, usually a small foil label near the top hinge. If the label has worn off, the width and the hinge-pattern spacing of the panel will get you the right match – measure the panel to the nearest 1/16 inch, then measure center-to-center on the hinge bore holes. Those two numbers rule out most of the wrong parts.
The compatibility gotcha on ES Windows kitchen components is depth: cabinet boxes were spec’d at a fixed depth per series, so a panel pulled from a different series can have the right width and still sit proud of the frame by 1/8 to 3/16 inch. We see this on Summerlin remodels where a homeowner bought a “same size” replacement online and it never sat flush. The other one is hinge bore – the bore diameter changed across production runs, so the hinge you order has to match the bore in the door, not the hinge on the frame.
On OEM versus aftermarket: for anything structural (box panels, drawer bottoms, drawer slides), an OEM-spec match is worth the wait. For hinges, shelf pins, and pulls, a quality aftermarket equivalent is fine and often more durable – we set the standard on the bore and the load rating, and we don’t guess at either. We don’t claim to stock ES Windows parts and we don’t carry them on a truck; we source to spec, and that takes a lead time we’ll tell you up front.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Kitchen Remodeling Is Failing
- Drawers that stick or squeal on the slide. In Summerlin, the low humidity pulls moisture out of the wood box and the slides lose alignment – the roller or the undermount arm is running off-track, not worn out.
- Doors that won’t close flush at the top corner. That’s hinge drift, usually from a bore that’s wallowed out or a hinge plate that’s backed out of soft particleboard. The hinge is the symptom; the substrate is the cause.
- A visible gap opening at the panel joint. Thermal cycling across a Summerlin summer, swinging from 70s at night to 105+ in the afternoon, works the joint open. Once the glue line goes, the gap grows about 1/32 inch a season.
- Water staining or swelling at the toe kick or under the sink. Chronic slow leaks from a supply line or disposal drain swell the substrate and the panel loses its shape – this one needs to be caught before the box delaminates.
- A corner that’s gone soft or crumbly. That’s moisture damage to the substrate behind the face. The panel looks fine from the front and fails from the back, so it reads as a mystery until you pull it.
Replacement Cost & What’s Included

Installed pricing around ES Windows kitchen remodeling in Summerlin runs in the ranges below. These are the numbers we put in the written quote – not a range that moves at the door. We give you the price before a single tool comes out, and the price doesn’t change once the work starts.
| Scope | Installed range (Summerlin) |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: number of boxes and drawers, whether the layout changes (moves plumbing or electrical, which means pulling permits and passing inspection), counter material (Cambria runs higher than Silestone at the same square footage), and whether backsplash tile is a simple running bond or a full herringbone. What’s included in the written price: parts sourcing to ES Windows spec, labor, tear-out and haul-away, permit pull and inspection, and a clean site at close. Every completed project carries the 365-Day Done Right Promise – if the work fails within that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some ES Windows kitchen part failures are safe to check yourself, and some aren’t. What you can safely do: read the label on the inside face of the door or drawer front, note the series, measure the panel width and the hinge bore spacing, and check whether the drawer slides are on-track or off. Photograph the label and the part; that’s most of what we need to quote.
Where DIY goes wrong on these: re-boring a hinge bore in a cabinet door. It’s a high-torque operation on a thin panel, and one slip cracks the door or blows out the substrate, turning a $350 hinge job into a $1,200 door replacement – and worse, a spinning bit in soft particleboard will grab. Pulling box panels that are glued and fastened into a run is the other one; you can easily crack the adjacent panel and open the joint. The rest is a fit problem: an un-square install telegraphs to every door and drawer in the run.
The honest split: label reading and measuring is a homeowner job. Bore re-drilling, panel extraction, and layout changes are not. Call us at (844) 588-0072 to schedule a free estimate.
FAQs

Expect 12 to 18 years for a drawer box or panel in Summerlin, and about 8 to 12 years on hinges and slides. The gap comes down to the desert climate – the low humidity works wood joints and hinge bores harder than a coastal install. If you’re past year 10 on hinges, you’re on borrowed time. Call (844) 588-0072 for an exact quote; estimates are free.
Often, yes – a single hinge or slide swap is a repair, and a joint that hasn’t delaminated can sometimes be re-clamped and re-fixed. It becomes a replacement when the substrate has swollen or the bore has wallowed past a quarter inch, because the panel won’t hold a new fastener. We tell you which one you’re looking at before we quote. Call (844) 588-0072 to have us look.
A single part swap in Summerlin runs a half day; a full cabinet installation runs three to five working days, and a full kitchen remodel runs three to five weeks depending on counter and cabinet lead times. Lead time on the ES Windows part itself adds to the schedule, and we put that number in writing before work starts. Call (844) 588-0072 for a project-specific timeline.
We source to spec using the series label, panel width, and hinge bore you give us, matched against the ES Windows series line, and we confirm the spec in writing before we order. We don’t claim to stock ES Windows parts – the honest answer is that we order to spec, and we tell you the lead time up front. Call (844) 588-0072 to start the spec review.
Get Your ES Windows Kitchen Squared Away
If your ES Windows kitchen is showing a failed drawer, a hinge that’s drifted, or a joint that’s opened up, the fix starts with a written price and a clear scope. Bradford Remodeling Co Summerlin gives you both before a single tool comes out, backs the finished work with the 365-Day Done Right Promise, and answers the phone with a live person, 24/7. Our technicians have up to 22 years of experience on kitchen systems, and we work from a documented brand roster so every spec is traceable. Call (844) 588-0072 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












