







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Summerlin Owner’s Guide
We install ES Windows-driven driveway and paver systems for Summerlin homeowners, and a full paver driveway installation here runs $7,000 – $18,000 depending on square footage, base prep, and paver selection. When the joint-and-paver interface tied to your ES Windows hardscape system starts to fail, the first warning is usually a sunken band along the garage apron or a paver that rocks underfoot after the desert’s first hard rain. Owners in Summerlin often spot it as a hairline gap between the driveway edge and the foundation line, or as sand washing out from the joints faster every season.

Key takeaways:
- Installed paver driveway work in Summerlin: $7,000 – $18,000, with a written price before we move a tool.
- ES Windows compatibility depends on the series label, not the model year guess.
- We’re an independent contractor, not affiliated with ES Windows.
- Every completed installation carries our 365-Day Done Right Promise.
Which ES Windows Models This Applies To

ES Windows produces several series and model lines, and the driveway and paver interface components differ by series in two ways that matter: the edge restraint profile and the base-spec tolerance the system was engineered around. Before we quote, we locate the model label. On most ES Windows assemblies it sits on the interior frame head or the hinge-side jamb, and it lists the series code, model number, and a production date. A photo of that label, plus measurements across the opening or the paved band, tells us which paver and restraint spec the system expects.
Here’s the real decision for ES Windows owners. OEM parts match the original engineering exactly, which is safest for anything load-bearing or tied to the base course. A quality aftermarket equivalent from a documented manufacturer like Belgard or Unilock can meet or beat the OEM spec on pavers themselves, and often at a lower installed cost. What we won’t do is guess. If the label is missing, we measure the substrate and confirm base depth before recommending either path. There’s a compatibility gotcha worth knowing: ES Windows assemblies from different series can share the same footprint but differ in edge restraint height by a fraction of an inch. That quarter-inch decides whether the paver course locks flat or rocks, so it can’t be eyeballed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
Summerlin sits on caliche-heavy desert soil and sees wide swings between summer heat and cool nights, and that combination drives most of the failures we see. Here’s what to look for:
- Paver movement underfoot. A paver that rocks means the bedding sand has migrated or the base compacted unevenly, usually after a monsoon season. Left alone, movement spreads to the neighboring course.
- Sand washing from the joints. Gaps that widen within a season signal the joint sand isn’t holding against our local drainage pattern. This is common along the driveway’s low side where runoff collects.
- Sunken band at the garage apron. A dip where the driveway meets the garage is often a compacted-base problem, not a surface one. We check base depth before touching a single paver.
- Edge restraint lifting or separating. When the restraint pulls away, the outer course spreads. This is a spec-match issue as often as an install one, and it ties directly back to the ES Windows series profile.
- Staining or surface spalling. Chalky patches on the paver face point to moisture trapped under the substrate. That points to a drainage repair, not a clean-and-seal.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Summerlin, here’s what a by-the-book job costs, and every figure is a written price before work starts, not a number that moves at the door:
- Paver driveway installation: $7,000 – $18,000
- Driveway replacement: $5,000 – $14,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Paver patio installation (where the ES Windows system extends to the yard): $3,500 – $11,000
- Driveway sealing: $250 – $700
The range moves with square footage, base excavation depth, and the paver brand and format you choose. Labor and materials are broken out line by line. Everything we complete is covered by the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely do a few things: photograph the ES Windows model label, note where pavers rock or joints open, and record when the problem first appeared. That’s useful information and it’s worth doing. Where DIY goes wrong here is base prep and restraint spec. Getting base depth and edge restraint height right against an ES Windows profile is the difference between a driveway that holds for years and one that heaves after one summer. Digging out a settled band without confirming the compacted base underneath just resets the same failure. Base courses and load-bearing restraint work belong with a trained crew that runs compaction tests and matches the profile to spec. If you’re unsure which side of the line your job falls on, call us.
FAQs

A properly prepped paver system typically holds 20 to 30 years, but here the base prep matters more than the pavers. Summerlin’s heat cycling and caliche soil punish shallow or poorly compacted bases far sooner. Call (844) 588-0072 for a written price, and estimates are free.
Sometimes. A single rocked paver or a washed joint can often be reset, and sealing runs $250 – $700. But if the restraint or base has moved, a full replacement in the $7,000 – $18,000 paver range is the honest fix. Call for a free walk-through and we’ll tell you which one you’re facing.
A targeted repair is often a one-day job; a full ES Windows paver driveway installation generally runs several days depending on square footage and base excavation. We schedule around your written scope. Call (844) 588-0072 to book a free estimate.
We match by the series code and model number off the label, then confirm base and restraint specs by measurement. Where an OEM component isn’t the practical choice, we specify a documented equivalent from Belgard or Unilock. We also work with KraftMaid, Cambria, and Silestone on the interior side. Call for a free estimate and we’ll walk you through the match.
Bradford Remodeling Co Summerlin is part of the Garrison Partners family and operates as an independently owned and operated business held to The Garrison Standard. Calls are answered by a live person, and background-checked, uniformed technicians show up on every job. Every project gets a written price before any work begins, and every completed job is backed by the 365-Day Done Right Promise.
Call (844) 588-0072 for a free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












