







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Summerlin Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Summerlin, NV – kitchen islands, cabinet installation, walk-in showers, vanities, countertops, backsplash, and roof seam work on Dvele modular and prefab homes. What makes our Dvele work different is that we plan every job around the panel seams and factory tolerances that come with a home built in a factory and set on site. Bradford Remodeling Co Summerlin is not affiliated with, sponsored by, or authorized by Dvele. We’re an independent local provider. Our technicians have up to 22 years of experience, and every project carries a written price before work begins.

Why Trust Bradford Remodeling Co Summerlin for Your Dvele Construction?

Dvele builds modular single-family packages, prefab ADU and guest-house units, and panelized wall and floor systems, plus factory-finished kitchen and bath interiors. That’s a different animal from site-built framing. Our technicians know where the seams sit in a Dvele wall system, how the factory trim tolerances read against a site-set floor plane, and why a cabinet run that looked square in the factory can drift after transport.
Parts sourcing matters here. For matching repairs we work to OEM-grade or equal cabinet, glass and trim components sized to the factory openings, so a repair respects the module’s built-in tolerances instead of fighting them. For upgrades like countertops or shower enclosures, quality aftermarket products fit factory openings fine and cost less. We also work warranty-safe: nothing we do is designed to void Dvele’s coverage, and we’ll tell you plainly when a fix should go through the manufacturer rather than through us.
The other reason owners call us is process. Bradford operates under The Garrison Standard, which means the scope is documented, the price is written, and the finished work is backed by the 365-Day Done Right Promise. If a repair or install fails inside that year, we come back and correct it at no charge. You can reach a live person at (844) 588-0072 any hour, any day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Summerlin
Dvele homes are well built, but modular construction has its own failure patterns. These are the ones we see repeatedly in Summerlin.
- Hairline cracks at panel-to-panel joints. As modular boxes settle onto the foundation, the marriage lines between modules move a fraction. Drywall and paint telegraph that movement as fine cracks, usually within the first year after set. The fix is proper joint reinforcement and flexible finishing, not another coat of spackle.
- Cabinet doors that rub and reveal gaps that go uneven. Dvele factory cabinet and millwork is set at the factory to modular tolerances, then the home travels and settles. Doors that cleared perfectly on the build floor start rubbing months later. The cause is almost always the box drifting out of plumb, not a bad hinge.
- Service chases and mechanical penetrations between modules. Adding a kitchen island, relocating a shower valve, or running a new tile field means working around chases that cross module boundaries. Cut in the wrong spot and you’re into a chase you can’t easily close.
- Exterior flashing and roof transitions at module seams. The seam where two roof sections meet is the most weather-exposed joint on a modular home. Summerlin’s wind-driven monsoon rain and 110°F+ summer UV load both work on that sealant. Resealing before the season turns is routine upkeep, not a defect.
- Floor plane and leveling mismatch at a panel joint. This is the one that surprises owners. A new island or walk-in shower won’t sit square because the modular floor panels carry their own tolerances and a seam runs right through the planned footprint. It’s a leveling and framing issue, not a defective cabinet or shower pan.
Here’s how that last one usually plays out. A Dvele homeowner notices a new island or a walk-in shower won’t land squarely, and the seam runs right through the footprint. The usual cause is a leveling or framing mismatch at a panel joint rather than a defective product. A qualified local pro typically verifies the module seam and floor plane first, then shims, reinforces or re-flashes as needed before setting the island, vanity or shower enclosure and finishing tile across the joint.
Dvele Parts & Our Repair-vs-Replace Approach

The honest answer on parts is that Dvele isn’t a mass-market brand with a shelf of components at the local supply house. We don’t stock Dvele parts, and nobody in Summerlin legitimately does. What we do is source to the module: OEM-grade or equal cabinet boxes, doors, glass and trim components matched to Dvele’s factory-finished millwork dimensions, so a repair keeps the panel’s built-in tolerances intact. For upgrades like a new countertop or a shower enclosure, quality aftermarket products sized to the factory opening are the smarter buy. They fit, they cost less, and they carry their own manufacturer warranty on top of ours.
Repair versus replace is a judgment call we make with you, not for you. If the modular shell is sound, we repair it. We replace only components that are genuinely out of tolerance or failing: a cabinet box that won’t true up, a shower pan that’s cracked through, flashing that’s beyond resealing. You get a written price before any work starts, so the decision is yours to make with real numbers in front of you. Call (844) 588-0072 and we’ll walk your Dvele home and tell you which side of that line each item falls on.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We start at the seam, not the symptom. Before quoting a cabinet or shower fix, we check the module joint nearest the work and verify the floor plane. Most mistaken “bad cabinet” calls in Dvele homes trace back to a panel joint.
- 2
Written scope and price. You get the scope and the price in writing before any tool comes out. Under The Garrison Standard that’s fixed, not a range that moves at the door.
- 3
Repair or install. Components are fitted to the factory openings. Tile fields and trim are finished across the joint so the repair reads as original construction, not a patch.
- 4
Test and inspect. Shower valves get tested under pressure, doors and drawers get cycled, roof seams get water-checked. We don’t call a job done until it’s been through that.
- 5
Warranty handoff. You get the signed 365-Day Done Right Promise in your hand, a clean site, and a documented scope. If anything we touched fails within the year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Summerlin
We work across the Dvele range: modular single-family home packages, prefab ADU and guest-house units, panelized wall and floor systems used in custom builds, and factory-finished kitchen and bath interior packages. On the kitchen side that means island installation, cabinet installation and refacing, countertops and backsplash. On the bath side it’s walk-in showers, shower remodeling, tub-to-shower conversions and vanity installation. Outside, we handle roof repair and resealing at module seams and flashing transitions. If your Dvele home has a joint, a chase or a factory opening, we’ve worked around one like it.
We Also Service These Brands
Bradford Remodeling Co Summerlin isn’t a single-brand shop. Alongside Dvele work we install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures, among others. That wider bench matters on Dvele upgrades: when you want a Cambria countertop matched to a factory cabinet run, or a Kohler valve behind a new shower wall, the same crew handles the whole scope under one written price and one guarantee.
FAQs – Dvele Construction Service in Summerlin

No. We’re an independent Dvele service provider with no affiliation, sponsorship or authorization from Dvele. We work on Dvele homes the way any qualified local contractor would, and if a repair should go through the manufacturer’s warranty instead, we’ll tell you that directly.
We source OEM-grade or equal components matched to Dvele’s factory millwork and panel dimensions, and we don’t claim to stock Dvele parts locally – nobody in Summerlin does. For upgrades like countertops and shower enclosures, quality aftermarket products sized to the factory openings are the better value. Call (844) 588-0072 and we’ll tell you exactly what a given repair needs.
A roof seam reseal or a cabinet realignment is usually a single visit. A walk-in shower or an island install is typically a multi-day job once the floor plane and seam are verified. You’ll get the schedule in writing with the price before work starts.
We cover Dvele modular single-family home packages, prefab ADU and guest-house units, panelized wall and floor systems, and factory-finished kitchen and bath interior packages. If you’re unsure which package your home falls under, the model documentation that came with the home settles it.
Not the way we work it. Repairs are done to factory tolerances with matched components and nothing is altered in a way designed to break Dvele’s coverage. When a failure looks like a manufacturer issue, we flag it so the claim stays open. The work we perform also carries our own 365-Day Done Right Promise.
Here are the ranges we quote in Summerlin, and they hold whether the home is site-built or modular:
| Service | Price Range |
|---|---|
| Kitchen Island Installation | $3,000 – $10,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Roof Repair | $400 – $1,800 |
Call (844) 588-0072 for an exact quote – estimates are free, and Dvele jobs that include seam or floor-plane correction get that work priced in writing up front, not discovered later.
Book Your Dvele Service in Summerlin, NV
Whether it’s an island that won’t sit square, cabinet doors that started rubbing, or roof seams that need resealing before monsoon season, we’ll give you a written price before any tool comes out and back the work with the 365-Day Done Right Promise. Call (844) 588-0072 to schedule your free estimate in Summerlin.
Written by the team at Bradford Remodeling Co Summerlin.












