







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Bathroom Remodeling: The Summerlin Owner’s Guide
Bathroom remodeling in a Dvele home in Summerlin typically runs $9,000 – $28,000 installed, depending on whether you’re doing a full gut or a targeted shower and vanity rebuild. We install Dvele-compatible bathroom systems and finish work, and we quote the exact number in writing before anything gets torn out. Most Summerlin owners start calling after a shower pan starts flexing underfoot, a vanity cabinet swells at the toe kick, or a tile joint near the drain opens up and darkens. That last one usually means water has been getting under the waterproofing layer for a while.

Dvele builds factory-panelized homes, so the bathroom isn’t framed and finished the way a stick-built house is. Wall panels, plumbing rough-in placement, and tile substrate arrive as a coordinated system. That matters the moment one piece fails.
Which Dvele Models This Applies To

Dvele’s line runs from compact single-story plans up through two-story and multi-unit configurations, and the bathroom assemblies aren’t identical across them. The prefabricated bathroom pod and finish package in a smaller footprint model carries different dimensions than the primary suite bath in a larger plan. Before we quote, we identify the model and the specific bathroom assembly.
Here’s where homeowners get burned. The model plate is usually in the mechanical closet or on the exterior near the electrical panel, not stamped inside the bathroom. Pull it before you call anyone. Panel dimensions and fixture rough-in centers (the measured distance between drain and supply lines) are model-specific, and a part matched to the wrong Dvele plan won’t seat correctly no matter how good the part is.
On the OEM-versus-aftermarket question: Dvele’s factory components carry a defined spec, and where the original part is available, matching it removes guesswork. Where it isn’t, a quality aftermarket equivalent with the same dimensions and rating works fine, provided we verify the substrate it’s going onto. We check what’s behind the wall before we commit to a substitution.
One more thing: we’re an independent service provider. Bradford Remodeling Co Summerlin isn’t affiliated with Dvele, which means we look at your bathroom as a construction problem to solve on its own merits, not as a warranty claim to route through a manufacturer. We also install KraftMaid, Cambria, and Silestone finishes where an owner wants to upgrade rather than match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Bathroom Remodeling Is Failing
Bathroom failures in Summerlin rarely announce themselves. They show up as small things you notice and dismiss for a month.
- Shower pan flexes or sounds hollow underfoot. The pan has separated from the substrate beneath it, or the mortar bed was never solid. Every step opens the joint a fraction more, and water follows the gap.
- Grout lines near the drain darken and won’t scrub clean. That’s moisture sitting under the tile, not surface grime. The waterproofing layer has a breach and the mortar bed above it is staying wet.
- Vanity cabinet swells at the toe kick or bottom panel. A supply line or drain connection is weeping slowly behind the cabinet. By the time the cabinet shows it, the subfloor usually shows it too.
- Caulk at the wall-to-floor joint keeps reopening after you replace it. The two surfaces are moving independently. New caulk over a moving joint fails again in weeks.
- Musty smell that comes back after cleaning. Airborne mold spores from a damp cavity behind the tile or under the pan. The smell is the symptom; the trapped moisture is the cause.
Summerlin’s climate makes one of these worse than it would be elsewhere. Our air is dry, so surface water evaporates fast and hides the problem. Meanwhile the moisture trapped inside the wall assembly sits there. We regularly find shower failures in Summerlin that looked dry on the surface for a year or more.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed bathroom remodeling in Summerlin runs $9,000 – $28,000. A small bathroom remodel lands at $5,000 – $12,000. If you’re only replacing the shower assembly, figure $3,000 – $8,500 for a shower replacement, $4,500 – $12,000 for a walk-in shower, and $3,500 – $10,000 for a tub-to-shower conversion. A vanity install alone is $800 – $3,000.

What moves you up the range: whether the substrate behind the tile has to be replaced, whether plumbing rough-in has to shift, and whether you’re matching a factory finish or upgrading. What doesn’t move: the number we quote. The written price is set before work starts and doesn’t change at the door.
Every completed project carries the 365-Day Done Right Promise. If the work fails inside that one-year window, we come back and correct it at no charge. That guarantee is written, and you hold a signed copy when we close out the job.
DIY or Call Us?
Some things are worth checking yourself. Run the shower for ten minutes and watch the ceiling below, if you have access. Check under the vanity with a flashlight for staining or soft wood. Press the shower pan at the corners and listen. Look at the caulk joints and note which ones keep reopening. That’s diagnosis, and it saves time when you call.
Pulling the shower pan or opening a tile wall is where DIY goes wrong. Behind that tile is a waterproofing layer that has to be continuous from the drain flange up past the curb, and a wall assembly with specific vapor handling. Get it wrong and the new tile looks fine for six months before the same failure returns, with a fresh layer of damage underneath. Water behind a bathroom wall rots framing and reaches the subfloor. It’s a moisture problem that hides until it’s expensive.
Call (844) 588-0072 and we’ll walk the bathroom with you. Estimates are free, and a live person answers that line any hour.
FAQs

A properly built tile shower with intact waterproofing lasts 20 to 30 years. The failure point isn’t the tile, it’s the waterproofing membrane and the drain connection. In Summerlin’s dry climate, surface evaporation masks early moisture problems, so a shower can be failing for a year before an owner sees it. Call (844) 588-0072 for an inspection and a written estimate.
Sometimes, yes. A localized grout or caulk failure with dry substrate behind it is a repair. A shower pan that flexes, or tile that’s been wet long enough to darken the mortar, is a rebuild of that assembly. We tell you which one you’re looking at after we open it up, and the price is in writing before we start. Call (844) 588-0072 to schedule.
A shower replacement runs several days of working time; a full bathroom remodel runs a few weeks depending on scope and material lead times. Vanity replacements are quicker. We give you the schedule with the written estimate so you know what you’re living with and for how long. Call (844) 588-0072 for a scope-specific timeline.
We identify your model from the data plate, measure the actual assembly, and match dimensions and rating before ordering. Where the Dvele-original component is available we match it; where it isn’t, we verify a quality equivalent against your substrate and rough-in. We don’t guess from a photo. Call (844) 588-0072 and have your model number ready.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












