







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Kitchen Remodeling: The Summerlin Owner’s Guide
If you’re pricing a Cambridge Pavers kitchen remodeling project in Summerlin, NV, most full kitchen remodels run $14,000 – $45,000 installed, with small kitchens landing around $9,000 – $20,000. We install Cambridge Pavers-compatible specifications and match them against the rest of the kitchen so the finished room reads as one design, not a patch job. Most Summerlin owners come to this page after a hard-surface failure – a countertop edge that’s chipped out along the sink, a floor joint that’s opened up under the Summerlin heat, or a backsplash course that’s tenting away from the wall weeks after it was set. Before you call anyone, you need to know what part of the job actually failed, what a replacement runs, and how to spot the difference between a material problem and an installation one.

Which Cambridge Pavers Specifications Apply Here

Cambridge Pavers is best known for hardscaping – pavers, wall systems, and the structural components that hold them in place – so the term “Cambridge Pavers kitchen remodeling” gets thrown around loosely by homeowners trying to name a material family. In practice, what we match on a Summerlin kitchen job is the substrate, trim, and joint system that lives inside the footprint of the room, and we do it against documented manufacturer specs so nothing is guesswork. To identify what you actually have, look at three places: the trim profile under the toe-kick (many hard-surface installs use paver-style edge restraints), the joint width and color in the counter or floor field, and any stamped or stenciled identification on the back of a removed piece – pull one off if you can do it safely and check the back face.
The OEM-versus-aftermarket decision matters more than most homeowners expect. Cambridge Pavers parts are cut to specific tolerances; a cheaper aftermarket equivalent that’s off by a quarter inch can fail at the joint line inside two summers of Summerlin heat cycling. We work with a documented roster of name-brand materials – KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone surfaces, Kohler and Moen fixtures – so the parts are traceable. Bradford Remodeling Co Summerlin is an independent service provider and not affiliated with Cambridge Pavers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Kitchen Remodeling Part Is Failing
- Hairline cracks radiating from the sink or range cutout. Usually a sign the substrate beneath the surface has flexed or the original cut was made too close to an edge. It gets worse fast with heat cycling.
- Tenting backsplash or lifted edge trim. The adhesive or thin-set has lost its bond, often because it was applied over a dusty or painted wall. Left alone, moisture gets behind it and the whole run pops loose.
- Joint separation at the toe-kick or island face. The joint system has opened from differential movement between the cabinet carcass and the surface above it. Summerlin’s huge day-to-night temperature swings accelerate this.
- Chipping along a high-traffic edge. A part that’s chipped at the edge has lost its protection layer; a repair patch looks fine for a season and then re-chips at the same line.
- Visible staining or efflorescence on the surface. Moisture is sitting in the material because the sealer or the joint has failed. Small resealable issues are cheap; saturation underneath is not.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost in Summerlin & What’s Included

Installed replacement pricing for the most common parts of a Cambridge Pavers kitchen in Summerlin:
| Scope | Installed Range (Summerlin) |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: the part itself, whether the substrate needs repair or replacement, and the size of the cutout. Every Bradford project gets a written price before any work starts – parts and labor shown separately, no numbers that move at the door. If the work fails, the 365-Day Done Right Promise covers it: we come back and correct it at no charge within the guarantee period.
DIY or Call Us?
You can safely check for tenting by pressing on the backsplash, look for cracks at the cutouts, and photograph the back face of a pulled trim piece for identification. That’s the limit. What goes wrong when owners DIY: surface-sizing a replacement part against the existing joint instead of the substrate, skipping the moisture test that catches the real cause of a popped joint, and setting a piece that’s an eighth of an inch off and looks fine on day one, then fails within a year. A straight replacement of a trim or backsplash section is a one-day job with the right cut; a counter or floor field is not. If you’re not sure which part is failing, that’s exactly what we sort out first. Call (844) 588-0072 for a free estimate – a live person answers, not a voicemail.
FAQs

Fifteen to twenty-five years when the substrate was properly prepped and the joint system was sealed to spec. In Summerlin, the failure window is shorter for any piece exposed to direct afternoon sun through a south- or west-facing window, because the surface expands hard on 110-degree days and contracts overnight. Call (844) 588-0072 for an exact quote – estimates are free.
Sometimes, but not always. A popped backsplash section or a clean chip on a trimmed edge can often be reset and re-sealed; a crack that runs into the cutout or a joint that’s opened from substrate movement cannot be reliably patched. We tell you which one you have before anything is ordered. Call (844) 588-0072 and we’ll give you the honest read.
A trim or backsplash section is typically a one-day job. A counter or floor field takes two to three days once the replacement part is on site. We give you the schedule in the written price, and it doesn’t slide – a disciplined crew running to a documented scope is the whole point of The Garrison Standard.
We identify the part from the back face, confirm the profile and tolerance against manufacturer specs, and confirm the surface is compatible with the rest of the kitchen’s documented brands before we order anything. No parts are stocked on a truck; the piece is sourced to the job. Call (844) 588-0072 to get started.
Ready to get it squared away? Call (844) 588-0072 for a free estimate. Bradford Remodeling Co Summerlin will walk the room, tell you exactly which part failed, and give you a written price before a single tool comes out – backed by the 365-Day Done Right Promise and a live person on the line whenever you pick up the phone.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












