







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Bathroom Remodeling: The Summerlin Owner’s Guide
If you have a failed Cambria surface or fixture in a Summerlin bathroom, we install Cambria-compatible bathroom remodeling across the valley, and a full bathroom remodel runs $9,000 – $28,000 with a written price before any work starts. A single countertop or vanity swap usually lands in the $2,000 – $6,500 range when it is part of that scope. Most owners don’t call us until they spot the first real symptom, and it’s usually one of two things: a discolored seam behind a Cambria vanity top, or a hairline crack along a sink cutout where the stone was set too tight against the cabinet.

Which Cambria Models This Applies To

Cambria is engineered quartz, not natural stone, so “model” for a bathroom means the specific slab collection and the fabrication spec it was cut to. The common bathroom grades you’ll run into in Summerlin homes are the 2 cm (three-quarter-inch) slabs used on vanity tops and the 3 cm (inch-and-a-quarter) slabs used on full bathroom counters and shower surrounds. The 2 cm is the one that fails most often, because it needs a plywood substrate and a full glue line under it. Set a 2 cm Cambria top over a cabinet with a weak rail, and the flex shows up as a crack within a couple of seasons.
To identify what you actually have, look for the Cambria label on the underside of the slab or on the fabricator’s edge tape. Measure the thickness with a tape: 20 mm is 2 cm, 30 mm is 3 cm. The color name (Torquay, Brittanicca, Ironsbridge, and the rest of the line) matters for the cosmetic match, but the thickness and the fabrication detail are what decide whether a repair holds.
On the OEM-versus-aftermarket question: for Cambria, there is no meaningful aftermarket. Cambria is a closed-material product, and any replacement has to come from a slab that matches your color lot. Our technicians have up to 22 years of experience with this exact specification work. We are an independent service provider and not affiliated with Cambria, so we source the slab through local fabricators and show you the spec sheet before it’s cut.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Bathroom Remodeling Is Failing
Most Cambria bathroom failures announce themselves before they become expensive. Here’s what to watch for in Summerlin:
- A hairline crack along the sink cutout or faucet hole. The cause is almost always a cutout that was made too close to the edge or a missing glue bead. Cambria needs a minimum of about 1 inch of stone left around a cutout, and plenty of older Summerlin vanities were cut tighter than that.
- A dark line or haze along a seam. Seam adhesive that was mixed off-color or set with trapped moisture shows up first in summer, when Summerlin’s dry heat and the bathroom’s humidity swing hard against each other. It’s cosmetic until the seam opens.
- Rocking or a hollow sound when you tap the vanity top. The substrate has lost its glue bond or the cabinet rail has failed. Quartz doesn’t flex like laminate, so it cracks instead of bending.
- Discoloration near the backsplash or behind the faucet. Usually a bead of caulk that failed and let water sit against the stone edge. Summerlin’s hard water leaves mineral deposits that etch into the polished face over time.
- A stain under the sink or along the front edge of the cabinet. Water has been getting past the counter and past the sink rim. By the time you see it, the substrate (the plywood layer under the stone) is usually swelling and needs to be replaced along with the top.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed Summerlin ranges for the work that touches a Cambria bathroom surface. These are the same numbers we use across every estimate, written down before any tool comes out:
- Full bathroom remodel: $9,000 – $28,000. This is the right scope when the slab is failing and the tile, shower, and vanity are all aging together.
- Small bathroom remodel: $5,000 – $12,000. Powder rooms and hall baths where you’re keeping the footprint.
- Bathroom vanity installation: $800 – $3,000. Often bundled with a Cambria top; the number climbs with cabinet grade and plumbing rework.
- Walk-in shower installation: $4,500 – $12,000. Cambria shower surrounds sit at the top of that range.
- Tub-to-shower conversion: $3,500 – $10,000.
- Countertop installation (as part of a bath project): $2,000 – $6,500.
What moves the range: slab thickness and color availability, whether the substrate and cabinet need replacing, plumbing relocations, and whether the shower gets Cambria surround panels instead of tile. Every job gets a written, line-item price, a background-checked, uniformed technician on site, and the 365-Day Done Right Promise: if the work fails inside 12 months, we come back and correct it at no charge. Live person answers (844) 588-0072, day or night.
DIY or Call Us?
You can safely measure your slab thickness, photograph the underside label, check for rocking, and test the seam with a fingernail. That information helps us quote accurately, and it costs you nothing.
What we don’t recommend: pulling a Cambria top off the cabinet or re-gluing a seam yourself. Quartz slabs are heavy, brittle, and unforgiving of a bad set – one wrong lift and a $2,000 piece cracks in half. The substrate work under a vanity top and any plumbing disconnect should be left to a technician, and any cutout near a faucet or a GFCI outlet in the bath should never be drilled or cut by an untrained hand.
If you’ve confirmed a failure, call (844) 588-0072 and we’ll give you a written price for the correct scope. No change orders at the door.
FAQs

A properly fabricated Cambria top over a solid substrate lasts 20 years or more. The failure point in Summerlin is rarely the stone itself; it’s the seam adhesive and the plywood substrate under it, which degrade faster in the valley’s dry-heat and hard-water conditions. Call (844) 588-0072 if you want us to look at an aging top before it fails.
Sometimes yes. A hairline crack or an open seam can be re-epoxied and polished to where you won’t see it, and that typically costs a fraction of replacement. If the stone has cracked through the body or the substrate has swelled, it has to be replaced. We’ll tell you which one you’re facing in writing.
A single Cambria vanity-top replacement is typically a one-day job once the slab is on site. A full bathroom remodel with a Cambria surround runs several weeks depending on tile and shower scope. The slab lead time is the usual variable, and we tell you that number up front.
Cambria slabs come through a licensed fabricator, not a hardware store, so we match your color and lot number through our fabricator network and show you the spec before cutting. We don’t stock parts or carry slabs on a truck – the slab is ordered to your project. Call (844) 588-0072 and we’ll walk through the sourcing with you.
We also service KraftMaid, Silestone, and Kohler fixtures in the same Summerlin bathrooms, so a single scope can cover the whole room. Ready to price it? Call (844) 588-0072 for a free estimate – a live person answers, and the price is in writing before any work starts.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












