







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Summerlin Owner’s Guide
We replace and repair Boral windows and doors throughout Summerlin, and full window replacement here typically runs $4,500 – $15,000 installed, while impact-rated units land between $8,000 – $25,000 depending on count and frame material. Boral covers a lot of product lines, so the first job is always identifying what’s actually in your wall before we quote a part.

Most Summerlin owners discover a Boral failure the same way: a window that won’t latch flush, a patio door that drags across the threshold in July, or fog trapped between the panes of a sealed unit. Summerlin sits at roughly 3,000 feet with hard desert sun and summer afternoons that push past 110°F, so the parts that fail here fail on a different clock than the same window would in a coastal climate. Weatherstripping bakes and flattens. Glazing seals give up. Rollers and hinges wear faster than the product literature assumes.
Key Takeaways
- Installed window replacement in Summerlin: $4,500 – $15,000. Impact-rated: $8,000 – $25,000.
- Identify your Boral model from the etching or label before ordering parts.
- Sealed-unit fog and failed weatherstrip are the two most common Boral failures in Summerlin’s heat.
- We’re an independent service provider, not affiliated with Boral.
- Every job gets a written price before work starts and the 365-Day Done Right Promise.
Which Boral Models This Applies To

Boral’s window and door catalog spans vinyl new-construction and replacement lines, aluminum series, and impact-rated assemblies, and the model line determines which parts fit. A sash balance from one series won’t drop into another. That’s the first compatibility gotcha most homeowners hit when they order online by photo.
Here’s how to identify what you have. Look for an etching in the corner of the glass, usually a small block of text with a manufacturer code and date. Then check the frame: Boral stamps or labels the head jamb or the inside of the sash on most lines. If those are gone, we take three measurements that decide the part: visible glass width and height, overall frame width and height, and frame depth. Depth is the one people skip. A replacement sash or operator that matches in width and height but not in depth will not seat.
On the OEM-versus-aftermarket call, our position is straightforward. For moving hardware (operators, hinges, rollers, locks), an OEM part is the safer match because the mounting pattern and throw are cut to the original series. For weatherstrip, glazing seals, and screen components, a quality aftermarket equivalent is often the same durometer and profile at a better price. For sealed insulated glass units, we source to the exact thickness and spacer spec rather than to the brand name, because a mismatched unit voids the seal before it ever sees a Summerlin summer.
Worth stating plainly: Bradford Remodeling Co Summerlin is an independent service provider. We are not affiliated with Boral, and we don’t claim to be.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
These are the five failure signals we see most in Summerlin, and what’s actually causing each one.
- Fog or condensation between the panes. The sealed unit’s perimeter seal has failed and moisture has entered the gas space. Once that happens the unit cannot be dried out or resealed in place; the glass assembly gets replaced.
- A patio door that drags or won’t roll smooth. Usually a worn roller or a track packed with desert grit and deteriorated weatherstrip. In Summerlin, windblown dust works into the bottom track and grinds the roller assembly down faster than in sheltered climates.
- Daylight visible around a closed window or door. The weatherstrip has compressed and lost its rebound, or the sash has dropped out of square. A compression-set gasket lets hot air in and drives your cooling bill up all summer.
- A crank operator that grinds or spins free. The operator’s gear or arm has stripped. This is a wear part, and on casement and awning units it’s the piece that goes first.
- Locks that don’t catch or a sash that won’t latch flush. The keeper, strike, or lock mechanism has worn or shifted. A door that won’t secure is a security problem, not a cosmetic one, and it needs attention.
Replacement Cost & What’s Included

Window replacement in Summerlin runs $4,500 – $15,000 installed, and impact window installation runs $8,000 – $25,000. Those ranges reflect the whole job, not a part on a shelf: removal, disposal, new unit or assembly, flashing and sealing, trim, and cleanup.
What moves you up or down the range:
- Count and size. A single failed sealed unit is the low end; a whole elevation of windows is the high end.
- Material and rating. Standard vinyl versus impact-rated assemblies is the single biggest swing.
- Scope. A part swap (operator, roller, weatherstrip) is a repair, not a replacement, and prices far lower. We quote it as a repair.
Whatever the scope, you get a written price before any work starts, with parts and labor broken out, so nothing moves once we’re on site. The completed work carries our 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is safe to check yourself. You can measure glass and frame, read the etching, wipe out a bottom track, and confirm whether the fog is inside the glass or on the surface. That information makes our quote faster and more accurate.
Where DIY goes wrong: replacing a sealed insulated glass unit. A unit that’s ordered to the wrong thickness or installed with a pinched seal will fog again within a season, and you’ll have paid twice. Replacing a clad door or window assembly in a finished Summerlin wall is also a job where a bad seal means water intrusion behind the stucco, which is a much bigger repair than the window. And any work involving the opening itself, flashing, or structural attachment belongs with someone who does it every week.
If you’re not sure which failure you’re looking at, measure and call. We’ll tell you whether it’s a part or a replacement before you spend anything.
FAQs

How long do Boral windows and doors last in Summerlin? Expect 15 – 25 years for the frame and structure, but the wear parts (weatherstrip, rollers, operators, glazing seals) often need attention sooner in Summerlin’s heat and sun. Seal and hardware failure before the frame is common here, and it’s usually repairable without replacing the whole unit.
Can the part be repaired instead of replaced? Often, yes. Operators, rollers, locks, and weatherstrip are replaceable parts, and a repair is far cheaper than a new unit. Fogged sealed glass cannot be repaired, only replaced. Call (844) 588-0072 and we’ll tell you which side of that line you’re on.
How long does the swap take? A hardware or weatherstrip repair is typically a short visit. A single sealed-unit or full window replacement is scheduled work, and we give you the timeline in writing with the price before anything starts.
How do you source the part? We match to your Boral series and spec from measurements and the frame markings, and we work from a documented roster of name-brand materials so the specification is traceable. We don’t carry parts on a truck; every part is sourced to your actual unit. We also service KraftMaid, Cambria, and Silestone products.
Get a Written Price on Your Boral Window or Door
Tell us the symptom and we’ll tell you whether it’s a part or a replacement, with a written price before any work starts. Call Bradford Remodeling Co Summerlin at (844) 588-0072 for a free estimate. A live person answers, day or night.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












