







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Summerlin Owner’s Guide
Installing a Boral-based addition or ADU in Summerlin typically runs $45,000 to $130,000 for a home addition and $90,000 to $220,000 for a detached ADU, depending on square footage, foundation work, and finish level. We don’t stock Boral component parts and none ride on our trucks; every part is ordered to your specific model or site spec before the crew arrives. Homeowners usually find out something is wrong in one of two ways: a door or window in the addition sticks months after install, or a contractor leaves a materials list that doesn’t match the Boral trim stamped on the framing.

Bradford Remodeling Co Summerlin is an independent remodeling contractor, not affiliated with Boral.
Which Boral Models This Applies To

Boral makes a broad product family, and the “model” that matters for your addition depends on which product you’re matching. On the exterior, that means Boral TruExterior trim and siding, Boral Versetta Stone panels, and Boral cultured stone veneer. Inside, Boral doesn’t make structural framing, so an addition’s model match runs to the trim, soffit, fascia, and cladding profile stamped on the back of each piece, not the framing lumber itself.
Identify the right part by pulling a sample and reading the stamp or label: TruExterior pieces carry a Boral mark and a profile code, and Versetta Stone panels are labeled by color and profile series, which must match panel to panel or the mortar joints won’t line up. A tape measure across the face and thickness confirms profile; photograph the back stamp before ordering.
On the OEM-versus-aftermarket question, Boral-specific profiles like Versetta Stone have no true aftermarket equivalent, so order genuine panels. TruExterior trim can sometimes be matched by a comparable fiber-cement or engineered trim, but only if the thickness and width hold up to summer heat cycling, which we check before quoting either option.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
- Caulked joints opening at the trim-to-wall seam. Summerlin’s desert swing between 45°F winter nights and 105°F summer afternoons expands and contracts exterior trim more than the adhesive or caulk can follow, and the seam opens. Left alone, water gets behind the trim.
- Versetta Stone panels belying or bowing. When the attachment isn’t set to Boral’s spec, sun exposure warps the panel face and the mortar line cracks. It’s a fastening problem, not a stone problem, and it shows up first on south- and west-facing walls.
- Trim boards with a chalky, faded surface. UV intensity in Summerlin bleaches the surface of any exterior trim that isn’t the right engineered product, and the board starts to look sunburnt. Boral TruExterior resists this; generic trim usually doesn’t.
- Moisture staining at the soffit or fascia on the addition. If soffit venting is undersized, humid air from inside the house condenses on the coolest exterior point. Boral soffit products handle it, but the install has to leave the right airflow.
- A visible gap between the addition’s cladding and the original house wall. This is a flashing detail, not a Boral panel defect, and it lets monsoon rain track down behind the trim. It’s the single most common callback we see on additions in Summerlin.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed cost for a Summerlin addition or ADU project lands in these ranges:
| Scope | Installed Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: square footage, foundation type (slab versus raised), how much Boral trim and stone actually wraps the structure, and the mechanical rough-in for an ADU’s kitchen and bath. We give a written price before any work starts, with the Boral material list itemized separately from labor so you can see exactly what’s being ordered. Every completed project carries the 365-Day Done Right Promise: if the work fails inside a year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely measure and photograph the back stamp of any existing Boral piece and confirm the profile code before ordering a single replacement. That’s the useful DIY step. Replacing Versetta Stone panels or re-flashing an addition’s wall seam is where homeowners get into trouble: the fastening pattern is spec’d to wind load, and a single mis-set panel can bow within a Summerlin summer. If the seam is behind existing trim or the addition is over a second story, a ladder and a $19 tube of caulk won’t solve it. Call us at (844) 588-0072 and we’ll check the install against Boral’s spec before we quote a repair or a full replacement.
FAQs

Boral TruExterior trim and Versetta Stone are engineered for a 30-year-plus service life in normal desert conditions, but installation quality is what decides whether you get that. UV is the main stressor in Summerlin, and the material handles it; the fasteners and flashing around it are what fail first. Call (844) 588-0072 for a free on-site assessment of your addition.
Yes, in many cases. A single cracked Versetta Stone panel or a loosened trim run can often be removed and re-set with the correct fasteners and flashing detail at a fraction of a full replacement. What can’t be repaired is widespread moisture damage behind the trim, which requires pulling the affected run. We’ll tell you which one you’re looking at before we quote. Estimates are free.
A single trim run or a partial panel replacement is typically a one- to two-day job. A full home addition runs 3 to 6 months, and an ADU runs 4 to 8 months depending on foundation, permitting, and finish level. We give you a written schedule with the estimate, not a guess at the door. Call (844) 588-0072 to start.
We order genuine Boral material to the profile code on your stamped sample or to the site spec on a new build, through documented manufacturers whose specs and warranties are traceable. No aftermarket substitution goes into a Boral-system project without your written sign-off. Bradford works with a documented roster of name-brand materials, including KraftMaid, Cambria, and Silestone for the interior side of an addition. Our technicians have up to 22 years of experience, and every project gets a written price before work starts.
Ready to price your Boral-based addition, ADU, or garage conversion in Summerlin? Call Bradford Remodeling Co Summerlin at (844) 588-0072 for a free estimate. We give you the price in writing before any work begins, backed by the 365-Day Done Right Promise and a live person answering the phone any hour.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












