







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Driveway & Pavers: The Summerlin Owner’s Guide
We install and repair Blanco driveway and paver systems across Summerlin, and most full driveway projects land between $7,000 and $18,000 installed for pavers, or $4,500 to $12,000 for concrete. We’re an independent contractor, not affiliated with Blanco, but we work with their paver and hardscape lines often enough to know which pieces match which system. Repair work, resealing, and single-section replacements usually run far less and can often be scheduled within days of your call.

Owners rarely wake up to a dramatic failure. What usually happens is slower: a paver settles unevenly near the garage apron, water starts pooling against the foundation after a winter rain, or the sand joints wash out and weeds push through. By the time someone in Summerlin calls us, they’ve typically been sweeping sand back into the joints for a season and wondering if the whole driveway needs to go. Most of the time it doesn’t.
Which Blanco Models This Applies To

Blanco’s paver and hardscape catalog covers several distinct product families, and the right replacement piece depends on which one is under your tires. The brand sells interlocking concrete pavers, permeable paving systems, and coordinating edging and joint materials, and the profiles aren’t interchangeable between lines. A 60mm paver from one series won’t sit flush against a 50mm or 80mm paver from another, and the joint widths differ enough that the sand spec changes too.
The fastest way to identify what you have is to lift one paver from a corner or a less-visible edge and measure its thickness with a tape. Note the color name stamped on the side where it’s visible, and photograph the surface texture and the joint pattern from directly above. If you have leftover pavers in the garage from the original install, that’s your answer right there. Bring us those measurements and photos, and we can match the piece without guesswork.
The OEM-versus-aftermarket call for Blanco pavers is simpler than it is for cabinets or fixtures. Color matching across production runs is the real risk, so we recommend genuine Blanco material when it’s available for your series. If your exact run is discontinued, a close aftermarket match in the same thickness and general tone usually reads fine in a driveway, where some weathering variance is expected anyway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Driveway & Pavers Is Failing
- Sand washing out of the joints after rain. The joint sand is the flexible part of the system, and when it erodes the pavers start shifting against each other. Summerlin’s monsoon-season downpours accelerate this noticeably compared to the slow seasonal rains most paver guides are written around.
- Paver edges lifting or rocking when you walk on them. That’s a base problem, not a surface problem. Water has gotten under the bedding layer and softened the compacted aggregate, so the paver loses support underneath.
- Weeds pushing up between pavers. Usually a joint-sand failure combined with organic material settling into the gaps. It’s cosmetic at first, but persistent weed growth means the joint isn’t sealing the way it should.
- Standing water against the garage apron or foundation wall. The driveway has lost its slope, either from settling or from a base that wasn’t compacted properly to begin with. This one matters most for Summerlin homes, where flat lots and hard caliche soil can send water sideways instead of away.
- Efflorescence, a white chalky film on the surface. Mineral salts migrating up through the concrete, often triggered by moisture trapped in the base. It fades on its own sometimes, but recurring blooms point to a drainage issue underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a Blanco paver driveway or repair actually runs in Summerlin, priced as a written range before any work starts.
| Scope | Installed Price Range |
|---|---|
| Full paver driveway installation (Blanco or equivalent) | $7,000 – $18,000 |
| Paver driveway replacement (remove and reinstall) | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing | $250 – $700 |
The range comes down to square footage, how much base prep is needed, and whether we’re replacing the full field or matching into an existing run. A single failed section near a downspout is a far smaller job than a driveway that’s lost its slope across the whole apron. Either way you get the number in writing before work begins, no change orders once the crew is on site, and materials plus labor quoted as one line-item scope. Every project carries our 365-Day Done Right Promise: if the work fails within the full year after completion, we return and correct it at no charge.
DIY or Call Us?
Some things you can safely check yourself. Walk the driveway after a rain and photograph where water pools. Pull one loose paver and measure its thickness. Look at the joint sand level along the edges and see whether any sections rock underfoot. If you’d rather reseal an intact driveway, that’s a reasonable weekend project with a roller and a decent sealer.
Where it goes wrong is the base. Resetting a lifted paver without diagnosing why it lifted just means it lifts again in a month, and in Summerlin, where caliche and hardpan can hold water against the slab, a base that isn’t rebuilt right will fail faster than the original did. Removing and resetting pavers, recompacting the aggregate, and restoring the slope is grade work, and grade work done wrong sends water at the house. That’s where we come in.
If you’re not sure whether it’s a surface fix or a base fix, call us at (844) 588-0072. A quick walkthrough tells us which, and the estimate is free.
FAQs

A properly installed Blanco paver driveway will typically hold its surface, color, and structure for 25 to 30 years in this climate. The pavers themselves rarely fail. What fails is the joint sand and the compacted base beneath them, and that’s usually what needs attention at the 10 to 15 year mark. Call (844) 588-0072 if you’re not sure which layer is failing.
Yes, in most cases. Individual pavers can be lifted and reset, joint sand can be replenished, and a failed section can be rebuilt without touching the rest of the drive. Full replacement is only needed when the base has failed across a large area or the slope can’t be recovered any other way. A walkthrough tells us which. Call (844) 588-0072 for a free estimate.
A single-section repair usually takes a day. A full paver driveway installation or replacement generally runs three to five days, depending on square footage, base prep, and weather. We give you the timeline in writing before we start, so you know what to expect on your Summerlin property. Call (844) 588-0072 to get your scope and schedule.
We source Blanco-compatible pavers through documented manufacturer channels and match color and thickness to your existing run using measurements and photos you provide, rather than guessing. We also work with Belgard and Unilock hardscape lines, along with KraftMaid, Cambria, and Silestone for interior work, so we’re not limited to a single source. Call (844) 588-0072 and we’ll walk you through what’s available for your series.
If you’re ready to get the driveway sorted, call (844) 588-0072 for a free estimate. We’ll give you a written price, a clear scope, and a straight answer on whether you need a repair or a replacement before anything gets pulled up.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












