







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Roofing: The Summerlin Owner’s Guide
Belgard-compatible roofing work in Summerlin runs about $8,000 to $20,000 for a full roof replacement and $400 to $1,800 for targeted repairs, and we’ll tell you which side of that line your roof actually falls on before any work starts. Belgard is best known for pavers and retaining walls, so most Summerlin owners who search for “Belgard roofing” are really tracking down the roofer who installed a Belgard-spec’d roof assembly, or a specific component tied to that job. The part usually announces itself the same way: a ceiling stain that shows up a day after a monsoon, granules collecting in the pool, or a lifted edge over the garage that you can see from the driveway.

Which Belgard Models This Applies To

Belgard’s core catalog is hardscape: pavers, wall block, and the caps and edging that go with them. On a Summerlin roof, “Belgard” almost always refers to one of three things: a paver-topped flat or low-slope section (patio roof, porch, detached ramada), the mortar and flashing that tie that section into the main roof, or a roofer’s shorthand for the Belgard paver run at the base of a wall that needs to match what’s overhead. Get the part right by identifying three things before you buy: the paver profile and color name stamped on the packaging or left on a spare in the garage, the thickness of the block (Belgard runs common 60mm and 80mm profiles, and thickness decides how a cap or edge piece seats), and the condition of the substrate under it. For a flat paver roof, the failing element is usually the underlying membrane, not the paver itself.
When it comes to OEM versus aftermarket, match the profile and color name exactly. Belgard colors drift slightly by production run, so a “matching” block from a different lot can read one shade off under Summerlin’s harsh afternoon sun. If the original profile is discontinued, a quality aftermarket block in a close color is a reasonable call for a repair patch, but say so plainly on the invoice. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Belgard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Roofing Is Failing
- Granules in the gutter or on the pavers below. Asphalt shingles shed their mineral surface as they age, and in Summerlin’s UV load a shingle that would last 20 years elsewhere can show granule loss closer to year 12 to 15. It’s the first sign the roof surface is past its prime, not just dirty.
- Lifted or curled paver caps and edge pieces. Heat cycling and the expansion of the substrate underneath pop a cap loose and leave a gap for water. Once that gap opens, water gets under the block and into the membrane.
- A ceiling stain after a monsoon. Summerlin gets its rain in short, hard bursts, and a small flashing failure that stayed dry all summer shows up fast in July and August. The stain is the symptom; the failed flashing is the cause.
- Visible daylight or a soft spot at the roof-to-wall junction. This usually means the counterflashing or the step flashing has pulled away. It’s the most common leak point on a low-slope section tied into a stucco wall.
- Rust streaks on the paver field or down the wall below. Streaks point to a corroded fastener or a failed sealant joint letting water track sideways. Left alone, that path finds the framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Summerlin, a full roof replacement runs $8,000 to $20,000, and targeted roof repair runs $400 to $1,800. The range is driven by roof size, pitch, the number of penetrations and valleys, the condition of the substrate, and whether the work includes replacing a paver-topped flat section versus a straightforward shingle field. Tile roof repair elsewhere on the same home runs $600 to $2,500, and metal roof installation runs $15,000 to $40,000 if the assembly is being upgraded. Every job gets a written price before work starts, broken out by parts and labor, with no numbers that move at the door. All completed work is covered by the 365-Day Done Right Promise: if the repair or replacement fails inside that year, we come back and correct it at no charge. You close the job with a clean site, a documented scope, and a signed written guarantee in hand.
DIY or Call Us?
You can safely inspect the roof from the ground with binoculars: look for lifted caps, granule loss, rust streaks, and staining on the stucco below the roofline. You can check the attic for active staining or damp decking after a storm. Checking insulation, pulling a sample of the failed paver into a bag for a match, and photographing the damage from inside are all reasonable.

What we won’t recommend is climbing a two-story Summerlin roof to reset a paver cap, reflash a wall junction, or chase a leak in the heat. Roof work is height work, and a fall from the wrong angle is a serious injury. The flashing and membrane details are also where DIY repairs go wrong: a sealant patch over a bad counterflashing holds for one monsoon season and then leaks worse than the original. Call (844) 588-0072 and we’ll tell you what it costs, put it in writing, and get the repair done right the first time, with the 365-Day Done Right Promise behind it.
FAQs

How long does Belgard roofing last in Summerlin? In Summerlin, a shingle roof that would last 20 years in a mild climate realistically lasts closer to 12 to 15 because of UV exposure and heat cycling; a paver-topped flat section outlives the membrane under it, so the membrane is what ages. Plan on the membrane needing a look at around the 10-to-12-year mark. Call (844) 588-0072 for a free estimate on your specific roof.
Can it be repaired instead of replaced? Often, yes. Most Belgard-related roof problems in Summerlin, lifted caps, failed flashing, a localized leak at a wall junction, come in around $400 to $1,800 to repair. A full tear-off usually only makes sense when the field is also past its service life or the substrate is failing under the paver section. We’ll tell you which one your roof needs in writing before any work starts.
How long does the swap take? A targeted repair on a Belgard-spec’d section is typically a one-to-two day job. A full roof replacement runs several days to a week depending on square footage, pitch, and weather access. You’ll get the schedule in writing with the price, and the 365-Day Done Right Promise covers the finished work for a full year.
How do you source the part? We match the paver profile, thickness, and color name to what’s on your roof, then pull the correct block or assembly detail through our documented brand roster. Bradford works with a traceable list of name-brand materials, including Belgard hardscaping alongside KraftMaid, Cambria, and Silestone, so specifications are on paper. We don’t stock parts or carry them on a truck; we source to spec, so the replace matches the original rather than getting close.
Bradford Remodeling Co Summerlin installs and repairs to spec across Summerlin, with a written price before work begins, background-checked and uniformed technicians on every job, a live person answering the phone 24/7, and the 365-Day Done Right Promise on every completed project. Call (844) 588-0072 for your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












