







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers: The Summerlin Owner’s Guide
We install Belgard driveway and paver systems across Summerlin, and replacement work typically runs $7,000 – $18,000 for a full paver driveway, with repairs and spot corrections priced far lower. If your driveway is failing, we can schedule a free written estimate without delay, and most straightforward corrections are handled on a single visit. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Belgard.

Owners usually find the problem the same way. A paver lifts slightly after a winter rain and rocks underfoot. Or a crack line appears along the driveway apron where the base meets the street. Sometimes it’s quieter than that: sand washes out of the joints in one corner, weeds push through a section that was solid last spring, and the surface starts to look tired in a way a pressure wash won’t fix. In Summerlin’s heat, the first sign is often edge creep, where pavers drift toward the street and the pattern goes crooked. Whatever brought you here, the question is the same: what failed, what replacement actually costs, and who does it right the first time.
Which Belgard Models This Applies To

Belgard’s paver line breaks into three families that matter for a driveway: the tumbled, old-world looks like Urbana and Catalina; the clean, dimensional lines like Aqua-Roc and Mega-Arbel; and the structural slab products like Belgard’s slab pavers used on drive aprons and heavy-traffic areas. Compatibility is where owners get burned. Belgard paver profiles are not interchangeable across products. A 60mm Mega-Arbel stone will not sit flush against a 80mm Urbana course without a visible step at the joint, and mixing thicknesses within one driveway creates trip edges and a joint that never seats right.
Identify what you have before ordering anything. Pull one paver from a discreet corner. On the underside, Belgard stamps the product name and often the plant code. Measure thickness with a tape, not by eye: most Belgard driveway pavers run 60mm to 80mm, and that measurement decides what you can match. The OEM decision is simple here. For a repair inside an existing field, match the exact Belgard product line and color, because a close color from another manufacturer will read as a patch from the street. For a full replacement, we spec current Belgard products by name and bring the manufacturer’s specification sheet to the estimate, so you see what’s going in before any tool comes out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Driveway & Pavers Is Failing
Pavers don’t fail all at once. They telegraph the problem first, and knowing which symptom you’re seeing tells us what’s actually wrong underneath.
- Rutting or depressions in the wheel path. The base underneath has settled or was never compacted to spec. This is a base failure, not a paver failure, and re-laying the surface without correcting the base just moves the problem.
- Loose sand and open joints. Joint sand washes out from monsoon runoff or irrigation overspray, and once the joints open, pavers shift and the interlock fails. A refill and re-compaction solves it early; ignored, it lets water into the base.
- Edge creep at the apron or driveway border. Missing, shallow, or rotting edge restraint lets the field push outward. In Summerlin’s heat, restraint spikes and plastic edging degrade faster than the pavers themselves.
- Discoloration or efflorescence that won’t wash off. White mineral bloom is usually a moisture problem, not a stain. It can also mean water is trapped under the pavers and needs to escape somewhere.
- Hairline cracks or corner chips on individual stones. One or two chipped units near a driveway or garage transition usually mean point loading or a raised edge, and it’s a cheap repair if we catch it before the neighbors wander over.
Replacement Cost & What’s Included
Here’s the range we work with in Summerlin. Paver driveway installation runs $7,000 – $18,000. A full driveway replacement runs $5,000 – $14,000. If your existing surface is sound and you’re sealing it, driveway sealing runs $250 – $700. Those numbers include material, excavation if needed, properly compacted base, edge restraint, bedding sand, joint sand, and cleanup.
What drives the range: driveway square footage, which is the biggest lever; whether the existing base can be reused or has to be rebuilt; access and haul-away; and the specific Belgard product you choose, since some lines run higher per square foot than others. We don’t publish a single number and then reprice at the door. Every estimate is a written line-item price before work starts, and that’s non-negotiable. When the job’s done, you hold a signed written guarantee: the 365-Day Done Right Promise covers the work for a full year, and if the install fails inside that window, we come back and correct it at no charge.

See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a clear line here. An owner can safely check for loose joints by sweeping and looking for gaps wider than a quarter inch. You can spot a rocking paver by walking the driveway slowly. You can pull one loose stone and read the stamp on the underside. That takes ten minutes and tells us a lot.
Where DIY goes wrong: re-setting pavers without correcting the base is the classic error, and it fails again within a season. Cutting pavers requires a wet saw that most homeowners don’t own, and cutting dry produces silica dust that’s a genuine health concern. Lifting and re-bedding a driveway section is hard physical work with a compaction tool you’ll likely have to rent, and the base is the part you can’t skip. If you’ve pulled a paver and can’t find a matching Belgard product, or the problem covers more than a few stones, that’s when a call saves you money. Call (844) 588-0072 and we’ll walk you through what you’re looking at before you commit to anything.
FAQs

The pavers themselves typically hold 25 to 50 years. What fails first is the base and the joints, not the stone. In Summerlin’s heat and monsoon cycles, expect to refresh joint sand every three to five years and check edge restraint annually.
Yes, often. If the base is sound and the failure is limited to open joints, one chipped unit, or a short section of edge creep, a repair can run a fraction of replacement cost. We assess the base first, because a repair on a failed base won’t hold.
A spot repair is usually done in one visit. A full driveway install typically takes several days, weather and site access depending. We give you the timeline in writing with the estimate, so it doesn’t drift.
We read the stamp on the underside of your paver and spec the exact Belgard product by name and color from current Belgard lines. You see the manufacturer’s specification sheet at the estimate. We also work with KraftMaid, Cambria, and Silestone on our interior projects, and the same documented-brand approach applies to every material we install.
Get a Written Price on Your Belgard Driveway in Summerlin
If your Summerlin driveway is rutting, spreading at the edges, or shedding joint sand, we install Belgard-compatible paver systems and back the work with the 365-Day Done Right Promise. Our technicians have up to 22 years of experience, and you get a written price before any work starts, no numbers that move at the door. We’re part of the Garrison Partners family, independently owned and operated, and a live person answers the phone any hour. Call (844) 588-0072 for your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












