







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Summerlin Owner’s Guide
Barrette roofing repairs in Summerlin typically run $400 to $1,800, while a full roof replacement runs $8,000 to $20,000, depending on the pitch, the number of planes, and whether the decking underneath is sound. We work with Barrette roof components and match the part to your existing system before anything gets ordered. Most owners discover the failure the same way: a brown ring on the ceiling after a monsoon, granules collecting in the gutter, or a shingle tab in the pool after a wind event. If you’re seeing any of that, the damage started upstairs weeks ago.

Key Takeaways
- Barrette roof repairs in Summerlin: $400 – $1,800; full replacement: $8,000 – $20,000.
- Barrette parts are matched to your specific profile and color line before ordering.
- You get a written price before work starts and the 365-Day Done Right Promise on every job.
- We’re an independent service provider, not affiliated with Barrette.
Which Barrette Models This Applies To

Barrette makes both roofing accessories (ridge vents, starter strips, hip and ridge caps, underlayment) and exterior building products, so the first step is confirming exactly which Barrette line your roof uses. The brands in play here are typically sold through building-supply yards in the Las Vegas valley rather than retail shelves, which means the part number on the packaging matters more than the logo. We ask for four things before we quote: the profile name, the color name, a photo of the label from the original bundle wrap if you still have it, and three measurements across the installed material.
Here’s the compatibility gotcha that trips people up. Barrette profile dimensions can shift slightly between production runs and between the accessories line and the field shingles. If your roof is five years old and you’re replacing a hip cap, an aftermarket “equivalent” with the right color name can still sit proud because the profile geometry changed. Measure the exposed face of an existing cap, not the whole piece.
OEM versus aftermarket for Barrette comes down to where the part sits. Underlayment and starter strip are forgiving; a quality aftermarket underlayment rated for the desert heat works fine. Ridge and hip caps, flashing, and anything that has to interlock with the field shingles should match the original profile precisely. Our approach is straightforward: we identify the part from your existing roof, then source from the building-supply yard that handles the Barrette line, so the specification is traceable and the quality isn’t left to guesswork. The same documented-brand discipline applies across our work, whether it’s a GAF shingle system upstairs or a KraftMaid, Cambria, or Silestone finish inside.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Roofing Is Failing
Summerlin’s climate is hard on roofs in a particular way, and the symptoms tell you what’s actually happening:
- Granules washing into gutters or pooling at downspouts. The mineral surface has worn through to the asphalt. It’s the first stage of failure in our UV load, where summer highs routinely sit above 105°F and accelerate the breakdown.
- Curling or cupping shingle edges. The mat underneath has lost adhesion, usually from heat cycling between hot days and cool desert nights. Once the edges lift, wind gets under them.
- Missing or displaced hip and ridge caps after a wind event. Summerlin sits in an area where spring and monsoon gusts can peel anything that wasn’t fastened to the manufacturer’s pattern. The caps come loose first because they’re the most exposed piece.
- Brown ceiling rings or attic moisture stains. Water is already past the field roofing. The leak started at a flashing point or a lifted seam, not directly above the stain.
- Lifted or rusted step flashing at walls and chimneys. The sealant around the flashing has dried and cracked. Water tracks sideways under the shingles before it shows up inside.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Summerlin pricing for Barrette roofing work, ballpark figures for a typical single-family roof:
- Roof repair (flashing, caps, isolated shingle work): $400 – $1,800
- Tile roof repair where steep-slope work is involved: $600 – $2,500
- Full roof replacement: $8,000 – $20,000
What drives you toward the top of a range: multiple roof planes and valleys, a steep pitch that requires extra staging, decking that needs replacement once it’s exposed, and any chimney or skylight flashing that has to be redone. Parts plus labor are both in those numbers. There’s no line that appears at the door because we found more damage.
You get a written, itemized price before the first shingle comes up. Every completed project is covered by the 365-Day Done Right Promise: if the work fails within that window, we come back and correct it at no charge. If we sent someone out, that technician arrived background-checked and uniformed, and you knew who was coming.

DIY or Call Us?
Roof work is a fall hazard before it’s a roofing problem. Summerlin roofs range from low-slope to genuinely steep, and walking one without fall protection is the single biggest risk in this trade. That’s not a sales pitch, it’s why so many of these jobs need to be done by a trained professional.
What you can safely do from the ground or a ladder you never leave: photograph the damaged area from a distance, check your gutters and downspouts for granules, look in the attic for staining or daylight, and note which side of the house faces the worst sun and weather. Don’t get on the roof to test a shingle or lift a cap. Don’t dig into flashing with a pry bar unless you’re prepared to re-roof the area you open.
If you’re local and it’s a straightforward cap or flashing repair, the honest answer is still: call us. We’ll tell you on the phone whether it’s a $400 patch or a symptom of something bigger. Call (844) 588-0072, estimates are free.
FAQs

A properly installed Barrette roof typically gives 15 to 25 years in this climate, with asphalt systems landing toward the shorter end and tile or metal pushing toward the longer end. Summerlin’s UV index and heat cycling are the main reasons. Call (844) 588-0072 for an exact quote on your roof, estimates are free.
Often yes, and a $400 to $1,800 repair is the right call when the failure is isolated to flashing, a few caps, or one slope. Repair stops making sense when the damaged area is large or the decking is soft. We’ll tell you which side of that line you’re on before you commit. Call (844) 588-0072, estimates are free.
A focused repair usually takes a day; a full roof replacement typically takes two to four days depending on the number of roof planes. Weather and material lead times can stretch it, and we’ll put the expected timeline in the written scope before work starts. Call (844) 588-0072 to get your free estimate.
We match the part to your existing profile and color, then source it from a building-supply yard that carries the Barrette line so the spec is traceable. You get the part number and the written price before we order. Call (844) 588-0072 for your free estimate.
Nothing about a failing roof gets simpler by waiting. The stated prices above are real ranges; the written price before work starts is the one you can hold us to, and it’s non-negotiable at Bradford. Every repair and replacement carries the 365-Day Done Right Promise, a live person answers the phone around the clock, and the crew that shows up is background-checked and uniformed. Call (844) 588-0072 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












