







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Fence Installation: The Summerlin Owner’s Guide
Barrette fence installation in Summerlin typically runs $3,500 – $9,000 installed, depending on linear footage, series, gate count, and whether we’re replacing a section of failed panels or starting fresh. A failing Barrette fence usually announces itself the same way in Summerlin: a gate that scrapes the ground, a post that rocks under hand pressure, or a panel that’s leaned out of plumb after a wind event, and half the time the homeowner assumed they needed a whole new fence when one section had given out.

We install Barrette-compatible vinyl fencing to manufacturer spec. Not affiliated with Barrette.
Key Takeaways
- Installed Barrette fence runs $3,500 – $9,000 in Summerlin.
- Most “failed fences” are failed posts, not failed panels.
- Written price before any work starts, backed by the 365-Day Done Right Promise.
Which Barrette Models This Applies To

Barrette makes fence in a handful of product families, and the parts aren’t interchangeable across them. The big ones you’ll see on Summerlin properties are the Bufftech line (vinyl privacy panel systems like the CertaGrain and Woodbridge profiles) and the aluminum and ornamental units sold under the Barrette Outdoor Living banner. Your first job is identifying what you actually have. Look at a panel edge or gate post cap for a printed or embossed mark, measure the post face (5×5 and 4×4 posts both show up in Summerlin), and note the panel height (4ft, 5ft, 6ft, and 8ft all exist). A post that’s 4×4 at the base but reinforced at the bottom tells you it’s a post-and-panel system, not a rail system, and those take very different anchor hardware.
OEM Barrette parts exist and are the safe choice when your existing fence is a currently supported profile. Aftermarket equivalents are a reasonable call for generic pieces (rail brackets, post caps, standard pickets) when the OEM part is discontinued. What you don’t want is mixing a rail from one series with a post from another. The dimensions line up within a fraction of an inch, and the failure shows up two summers later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Fence Installation Is Failing
A post that rocks when you push on it. The anchor at the base has loosened, or the footing was under-set to begin with. In Summerlin’s caliche-heavy soil, a post set with a shallow footing often works loose after a few of our 110°F summers and a monsoon or two.
A panel leaned out of plumb. Panels follow posts, so a lean almost always traces back to a failed post, not the panel itself. Checking with a level tells you which one gave.
A gate that scrapes or won’t latch. Hinge sag, a dropped post, or a gate that’s fighting a misaligned opening. Usually hinge and post, not the gate frame.
Visible cracks or splits along the post base. Vinyl flexes in heat, and a post that cracked near the footing is a post that wasn’t set for our temperature swing from 45°F winter nights to 110°F afternoons.
Loose caps or popped pickets. Fastener back-out from expansion and contraction. Cheap fix, but if it’s everywhere, the whole run was set too tight.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Summerlin, Barrette fence installation runs $3,500 – $9,000 installed. What moves the number: linear footage (most Summerlin lots land between 100 and 180 feet of fence), post count and footing depth, gate hardware, panel height, and access to the fence line (side yards behind block walls take longer than open runs).
That price is parts and labor, written as a line-item before any tool comes out. We quote the parts separately so you can see exactly what the Barrette profile and post hardware cost versus the install labor. No numbers that move at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. Our technicians have up to 22 years of experience.
DIY or Call Us?
What you can safely do yourself: identify the profile, measure panels and posts, check plumb with a level, tighten gate hinges, and re-seat loose caps. If the post is still solid, a hinge or cap swap is a hardware-store trip and an afternoon.
Where it goes wrong: resetting a post in Summerlin soil without the right footing depth and base material. A post that looks set works loose inside a year, and by the time you notice, the panel above it has warped and the gate has dropped. Setting posts properly means concrete, adequate depth, and alignment across the run. That’s not a weekend job for most Summerlin homeowners. Call (844) 588-0072 to schedule a free estimate.
FAQs

A properly installed Barrette vinyl fence typically holds up 15 – 20 years in our climate, but the Nevada sun does real work on it: posts exposed to full afternoon sun on a west-facing run fail faster than shaded sections, and the UV load here is harsher than most of the country. Lifespan comes down to footing quality more than the panel itself. Call (844) 588-0072 for an exact quote; estimates are free.
Often yes, if the posts around it are still solid and the profile is still supported. A single failed post or one cracked panel is a repair, not a replacement. We’ll tell you which you actually need after we look at it. Estimates are free.
A typical Summerlin residential run, 100 – 180 feet, is usually a two- to three-day job once permits and materials are squared away. A single-section repair is often a half-day. We’ll give you the schedule in writing before we start.
We match your existing profile first, then source either the OEM part or a documented equivalent, and we put the part spec on the written quote so you know exactly what’s going in the ground. If your profile is discontinued and only an aftermarket equivalent fits, we say so before you commit.
We work with a documented roster of name-brand materials across our work, including KraftMaid, Cambria, and Silestone on the interior side and Barrette on the fence line. Call (844) 588-0072 today to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












