







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Kitchen Remodeling: The Summerlin Owner’s Guide
We install and repair Atlas kitchen systems in Summerlin, and a full kitchen remodel here typically runs $14,000 – $45,000 installed, with written pricing before any work begins. Cabinets, surfaces, and fixtures tied to an Atlas layout are our most common call. Most Summerlin owners don’t wake up planning a remodel. They open a cabinet door and the hinge has torn out of the particleboard, or the drawer glide grinds and stops halfway, or the counter seam near the sink has lifted after a summer of dry heat and hard water. That failing part is what starts the phone call. This page is about matching the right replacement to your Atlas model, understanding what actually failed, and knowing what it costs in Summerlin before you commit.

Which Atlas Models This Applies To

Atlas has produced cabinetry and kitchen component lines across several series, and the parts are not interchangeable between them. The first thing we do on any Atlas call is find the identification label. It’s usually a paper or foil sticker inside the door of the base cabinet next to the sink, or on the back panel of the top drawer box. It lists the series and a model or order number. Photograph it before anything else.
If the label is gone, we measure. Door thickness, hinge cup bore (the round hole cut into the door for the hinge), and drawer box height and depth tell us which Atlas series you have. This is the compatibility gotcha that trips up most homeowners: an Atlas hinge from one series looks identical to another, but the cup bore and overlay differ by a few millimeters, and the door won’t sit flush once installed. The same applies to drawer glides. Undermount glides from different Atlas series have different cabinet-floor mounting patterns.
On OEM versus aftermarket: for visible hardware (hinges, glides, handles), a quality aftermarket equivalent often fits and costs less. For anything structural to the cabinet box, we match the Atlas series part or the closest documented equivalent. We don’t stock parts and we don’t carry them on a truck. We source what your specific model needs, verify the fit before install, and put the part number in writing on the estimate. We’re an independent contractor, not affiliated with Atlas. We also work with KraftMaid, Cambria, and Silestone when a failing Atlas component is a good moment to upgrade rather than replace.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Kitchen Remodeling Is Failing
Here’s what Summerlin owners describe when they call us. Each symptom points to a specific failure.
- Cabinet doors that sag or won’t close flush. The hinge screws have stripped out of the cabinet frame, or the hinge itself has worn at the pivot. In Summerlin’s dry air, wood shrinks slightly over the seasons, and screw holes loosen faster than in humid climates.
- Drawers that stick, grind, or fall off the track. The glide has failed internally, or the mounting screw has pulled from the cabinet floor. Undermount glides on older Atlas boxes are the usual culprit.
- Countertop seams that lift or darken near the sink. Water and hard-water mineral buildup work under the seam. Summerlin’s water is hard, and the mineral deposit shows as a white line before the seam actually fails.
- Cabinet box swelling or soft spots under the sink. A slow leak or condensation has soaked the substrate (the structural board under the finish). Once medium-density fiberboard swells, it doesn’t shrink back, and the part has to be replaced.
- Backsplash tile or caulk separating from the wall. Movement in the cabinet run or a failed caulk joint. The fix is usually re-setting the joint, not re-tiling the whole wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Summerlin, an Atlas kitchen remodel or significant component replacement runs $14,000 – $45,000 installed. That’s the lead range and it holds. Smaller kitchen remodels here land at $9,000 – $20,000. If it’s a component job rather than a full remodel, these ranges apply:
| Scope | Installed range (Summerlin) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: which Atlas series you have, whether the part is OEM or a documented equivalent, cabinet run length, and whether the failing component sits inside a broader remodel. Every price we give is written before work starts. No numbers that move at the door. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
Some Atlas checks are safe for an owner. You can photograph the model label, measure a door or drawer, tighten a loose handle screw, and re-caulk a separating backsplash joint. Those are low-risk and worth doing before you call.
Where DIY goes wrong: replacing a hinge or glide on an Atlas series you haven’t correctly identified, and re-setting a cabinet that has swollen substrate. The first wastes money on a part that won’t fit. The second hides the real problem. A swollen box means moisture is still getting in, and a new door on a wet cabinet fails again within a season. Countertop seam repair near a sink is the same story. If water is under the seam, sealing over it traps the moisture. We diagnose the cause, match the part, and install it with the fit verified. Call (844) 588-0072 and we’ll tell you honestly whether it’s a part swap or a bigger fix.
FAQs

Quality Atlas hardware typically lasts 10 to 15 years under daily use, but Summerlin’s dry climate and hard water shorten that. Hinges and glides here often fail closer to the 8-to-12-year mark because seasonal wood movement loosens screw holes, and mineral buildup stresses counter seams near sinks. Call (844) 588-0072 for an exact assessment.
Sometimes yes. A stripped hinge screw hole can be filled and re-drilled, and a separating caulk joint can be re-set without replacing tile. But a failed glide, a cracked hinge, or swollen substrate can’t be repaired reliably and should be replaced. We’ll tell you which before any work starts. Call (844) 588-0072.
A single hinge or glide swap takes under an hour once the correct part is on site. A cabinet door, drawer, or counter run replacement typically takes half a day to a full day, depending on scope. We confirm the part number and timeline in writing on the estimate before scheduling. Call (844) 588-0072.
We match your Atlas series from the cabinet label or from measurements, then source the OEM part or a documented equivalent and verify the fit before install. We don’t stock parts and don’t carry them on a truck. The part number goes in writing on your estimate. Call (844) 588-0072 to get started.
Ready to get it squared away? Call (844) 588-0072 for a free estimate. A live person answers around the clock. You’ll get a written price before any work begins, background-checked, uniformed technicians on the job, and the 365-Day Done Right Promise backing every completed project in Summerlin.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












