







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Home Additions & ADU: The Summerlin Owner’s Guide
If you own an Atlas home addition or ADU in Summerlin, the failure almost never announces itself. It shows up as a hairline crack at the ceiling-to-wall joint in the bonus room, a soft spot in the floor near the slider, or a musty smell in the casita that comes back no matter how often you air it out. Those are the three calls we get most: structural settlement at the tie-in, moisture at the transition, and finish failures at the seams where the addition meets the original house.

We build additions for Summerlin homeowners across the price bands below. Every project gets a written price before a tool comes out and the 365-Day Done Right Promise when we close. If the work fails inside that year, we come back and correct it at no charge.
What a Summerlin addition actually costs, installed:
- Home Addition: $45,000 – $130,000
- ADU Construction: $90,000 – $220,000
- Garage Conversion: $30,000 – $80,000
Which Atlas Models This Applies To

“Atlas” isn’t one thing in a Summerlin house. There are Atlas-built modular and panelized addition shells, Atlas ADU kits, and Atlas garage-conversion packages, and the failures come from different places in each. A panelized addition fails at the panel seams first. A kit ADU fails at the roof-to-wall flashing first. A garage conversion fails at the slab-to-wall transition first. Knowing which one you have changes what we inspect and what we quote.
Here’s how to identify yours before you call:
- Look for the Atlas spec plate or stamp inside the mechanical closet or on the panel edge near the tie-in. It lists the model line and the panel or shell series.
- Measure the wall thickness at the addition side: 2×4 framing with a 6-inch wall reads different from a 2×6 build, and we quote different tie-in methods for each.
- Check the roof pitch at the addition. Summerlin zoning limits how high an ADU can rise in relation to the main house, and an Atlas kit built at a different pitch needs different flashing.
OEM Atlas panels are matched to the original build. Aftermarket equivalents exist, but the siding and roof profiles must match the Atlas series or the seam will read wrong and leak. We source what actually fits and put the spec in the written price.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Home Additions & ADU Is Failing
Summerlin sits on the western edge of the valley where the soil is clay-rich caliche and the summer sun pushes the ground through big swings from cold nights to hot days. The soil expands and contracts, and an addition that isn’t tied and flashed for that movement tells you. Here’s what to watch:
- Hairline cracks at the tie-in where the addition meets the original wall. That’s differential settlement, and it starts as a crack and ends as a water path.
- Soft or bouncy floor near the exterior door. Usually a moisture problem at the slab or a failed subfloor under the threshold, common where irrigation runs close to the addition.
- Water stains at the roof-to-wall flashing. Atlas kit roofs are low-slope, and a low-slope flashing detail that isn’t pitched right lets water back up under the shingles in a monsoon.
- Musty smell or noticeable humidity in the casita. A ventilation problem. ADUs are small volumes, and small volumes hold moisture when the exhaust and venting aren’t sized to the room.
- Sticking doors or windows. Framing movement, often from a Summerlin addition that moved a little each season and never got a proper tie-in to bear it.
See the difference
Before
After
Before
After
Before
AfterWhat Replacement Cost Looks Like in Summerlin

We don’t sell parts off a shelf, and we don’t carry stock on a truck. What we do is match the right Atlas-compatible materials to your model, quote the whole repair or rebuild in writing, and install it. Here’s where the numbers land in Summerlin:
| Scope | Installed range |
|---|---|
| Home addition (full build, tie-in and finish) | $45,000 – $130,000 |
| ADU construction (new unit or full rebuild) | $90,000 – $220,000 |
| Garage conversion (to living space) | $30,000 – $80,000 |
| Targeted repair (flashing, tie-in, subfloor) | Quoted by inspection, written before work |
What drives the range: the size of the addition, whether the roof and framing need replacement or just repair, whether permits were pulled on the original Atlas build, and how much finish work is involved. Garage conversions run lower because the shell already exists.
Every scope comes with a written price before work starts. No numbers that move at the door. The 365-Day Done Right Promise covers every completed project for a full year: if the work fails inside that window, we come back and fix it at no charge.
DIY or Call Us?
Some of this you can check yourself. Walk the perimeter of the addition and look for cracks at the tie-in. Look up at the ceiling in the bonus room for stains. Feel the floor near the exterior door for bounce. Take photos and write down what you see. That’s a good head start on a real inspection.
What you shouldn’t do is open the wall or attempt your own tie-in repair. Structural work and roof flashing are where DIY goes wrong, and water damage in a Summerlin addition is expensive once it reaches the framing. A trained professional can tell you in an hour whether it’s a $400 flashing fix or a framing repair, and that’s the difference between a small invoice and a rebuild.
We’re an independent contractor, not affiliated with Atlas. We know the product lines and we install to spec. Call (844) 588-0072 for a free estimate. A live person answers, 24 hours a day.
FAQs

How long does an Atlas addition last in Summerlin? An Atlas addition built to spec and properly flashed should hold 30 years or more. In Summerlin’s climate, the flashing and the tie-in are what fail first, usually within 10 to 15 years if the detailing was thin. The promise is that if the work we complete fails within 365 days, we correct it at no charge.
Can it be repaired instead of replaced? Often, yes. Cracks at the tie-in, a failed flashing detail, or a soft subfloor are often targeted repairs, and we quote them after a walkthrough. Full replacement makes sense when the wall or roof framing is compromised. We price the repair first and tell you honestly which one you need.
How long does an addition build take? A garage conversion runs weeks, a full addition and an ADU run months, depending on size and Summerlin permitting. We give you the schedule in writing before work begins and keep it to the scope you signed.
How do you source the Atlas materials? We don’t hold parts in stock. We match the Atlas panel and flashing specs to what’s available against your model line, and we work with a documented roster of name-brand materials, including KraftMaid, Cambria, and Silestone, so the specifications are traceable and the quality is set by the manufacturer’s warranty.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












