







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Home Additions & ADU: The Summerlin Owner’s Guide
We build Ameristar-compatible home additions and ADUs in Summerlin, and a finished, permitted addition typically runs $45,000 – $130,000, with detached or larger ADU projects landing in the $90,000 – $220,000 range. There’s no same-day answer here, and we won’t pretend otherwise: additions are planned construction, and the free estimate comes before any work does. Most Summerlin owners discover the problem the same way, long before demo day: a failing addition already on the property. A converted garage that’s too hot to use by June, a room addition whose roofline was never tied into the main house, an ADU shell that was never permitted, or an Ameristar system whose panel connections are starting to show their age. When that’s what you’re living with, the question isn’t whether to fix it. It’s who writes the scope, the permit, and the price down before a single tool comes out.

Which Ameristar Models This Applies To

Ameristar’s lines cover a few different things that homeowners lump together: modular and prefabricated room additions, detached ADU shells, and the panel, window and roof systems that come with them. Which one you have changes what a rebuild actually involves, so we identify it before we quote.
Start with the identification plate. Ameristar modular units and panel systems carry a data label on the frame or interior wall, usually a metal tag or a printed decal with the model designation, a serial number, and a panel spec. If the label’s gone, we measure the wall panels and the roof pitch, and that’s usually enough to place the series. Two specific gotchas we run into in Summerlin:
- Panel spans changed between series. Older Ameristar panel systems used a different stud spacing than the current line. Matching an old panel to a new one without checking the span gets you a wall that doesn’t line up at the connection point.
- R-values vary by which series you have. A shell built for a cooler climate meets the same label as one built for the desert, and the insulation spec inside the wall cavity is not the same. In Summerlin’s summer heat, that difference shows up as a room that never cools right.
On the OEM-versus-aftermarket question for Ameristar specifically: the OEM panel and window pieces are the safest match, and the manufacturer’s spec sheet backs them. A quality aftermarket equivalent can work when the OEM piece is discontinued or the lead time is measured in months, but only with the span and R-value verified against the label. We don’t guess, and we don’t swap one spec for another without telling you in writing. Bradford Remodeling Co Summerlin is an independent contractor and is not affiliated with Ameristar; we source Ameristar-compatible materials and the documented brands we build with, including KraftMaid cabinetry, and Cambria and Silestone surfaces for the finishes inside.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Home Additions & ADU Is Failing
Five things that bring homeowners here, and what’s actually behind each:
- The addition is hot in June and cold in January, and the HVAC can’t keep up. The panel insulation has degraded or was never the desert spec to begin with, and the shell is leaking heat in both directions.
- Roof-to-wall connections show staining or daylight. The flashing where the Ameristar roof meets the main structure wasn’t tied in correctly, or the sealant failed after years of Summerlin sun. This is a rot problem in slow motion.
- Floor is out of level, doors stick, windows bind. The foundation or pier system has settled. It’s common in the older neighborhoods where lots were cut into the slope and drainage was an afterthought.
- Panels or window units show cracks at the seams. Thermal cycling: Summerlin swings from cool desert mornings to 105°F afternoons, and that expansion-contraction works the joints year after year.
- You can’t find a permit for the addition anywhere. Unpermitted work is the one that stops a sale cold. A lender or buyer’s inspector finds it, and the fix is retroactive permitting plus whatever the plans examiner requires.
None of these are cosmetic. Each one has a cause, and we identify the cause before we write a scope.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest range for Summerlin. Every number below is installed, with the permit pulled and the inspection passed:
| Scope | Installed Range |
|---|---|
| Home addition | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What moves the number: square footage, whether the shell is modular or site-built, foundation and drainage work, and how much of the failing structure can be saved. A garage conversion that keeps the existing slab sits near the low end; a detached ADU with its own utility rough-in sits near the top.

The Garrison Standard is what you get regardless of where in the range your project lands. A written, line-item price before any work starts. No numbers that move at the door, no change orders that weren’t in writing first. Background-checked, uniformed technicians on every job, so you know who is walking through your door. And the 365-Day Done Right Promise: every completed project carries a full-year written guarantee, and if the work fails inside that window, we come back and correct it at no charge. You close the job with a clean site, a documented scope, and a signed guarantee in your hand. Live person answers the phone, 24/7, not a voicemail.
DIY or Call Us?
What you can safely do yourself: check the data label, read the panel spec, take photos of the cracks and the staining, and pull the permit history from the county. That’s information gathering, and it helps us quote accurately.
What we don’t advise: pulling panels or opening roof-to-wall connections to see what’s behind them. Those connections carry the load of the shell above them, and the flashing, fasteners, and tie-in details have a right way to come apart and go back together. Open one wrong and you’re looking at a water intrusion problem that didn’t exist before. Same for foundation work and anything involving the electrical rough-in, which needs a licensed electrician and an inspection. This is genuine safety, not scare tactics: structural and electrical work is where DIY goes wrong in ways you can’t see until the next monsoon.
If what you need is the honest scope and the written price before you commit, call us at (844) 588-0072. The estimate is free.
FAQs

A properly installed Ameristar addition should hold for 25 to 40 years, and the shell panels themselves usually outlast the connections. What fails first in Summerlin is the sealant and flashing at the roof-to-wall tie-in, which takes a beating from the sun and the temperature swings; those details need periodic inspection, and the panel system gets the blame unfairly. Call (844) 588-0072 for an exact quote: estimates are free.
Often, yes. A settled foundation, a failed flashing detail, or degraded insulation can be corrected without replacing the shell, and the repair costs a fraction of a rebuild. Cracks at the panel seams and extensive rot in the framing are the cases that push toward replacement. We quote the repair first and tell you in writing if the repair won’t hold. Call (844) 588-0072 to get that answer for your Summerlin property.
A targeted repair runs one to three weeks; a full addition or ADU build runs several months, and we give you the schedule in the written scope before work starts. Permitting in Summerlin adds time on its own, and we don’t pad the estimate with a date we can’t hold. Call (844) 588-0072 to schedule the free estimate and get a real timeline.
We match your data label against the current Ameristar spec sheet first, and fall back to a verified aftermarket equivalent only when the OEM piece is discontinued or the lead time won’t work. Either way, the span and R-value are checked against your label, and the spec is written into the scope. We also work from a documented roster of brand materials, including KraftMaid, Cambria, and Silestone, so every finish inside the project is traceable too. Call (844) 588-0072 for a free estimate.
Bradford Remodeling Co Summerlin builds additions, ADUs, and garage conversions across Summerlin with a written price and a written guarantee on every job. Call (844) 588-0072 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












