







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Home Additions & ADU: The Summerlin Owner’s Guide
If you’re planning an American Standard home addition or ADU in Summerlin, the realistic installed range is $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached or attached ADU, and the work is scheduled, permitted and inspected – not same-day. American Standard is best known for faucets and fixtures, so we get a lot of calls from owners who want their addition’s plumbing, fixtures and finish schedule built around American Standard products they already trust. Most Summerlin owners don’t discover a problem with their “part” all at once. They find it when a rough-in valve won’t hold, a fixture spec gets changed at the supply house, or a permit reviewer flags something in the plan set – and the project that was supposed to start Monday now waits on paperwork.

Key Takeaways
- American Standard additions and ADUs in Summerlin run $45,000 – $130,000 (addition) and $90,000 – $220,000 (ADU) installed.
- The “part” that fails on an addition project is almost always a plumbing rough-in, a fixture specification, or a permit detail, not a spring or a circuit.
- We work from a written price before any work starts, and every completed project carries the 365-Day Done Right Promise.
- Bradford Remodeling Co Summerlin is an independent remodeling contractor. We are not affiliated with American Standard.
Which American Standard Models This Applies To

American Standard doesn’t make additions or ADUs. It makes the fixtures and plumbing products that go inside them – toilets, faucets, tub and shower valves, sinks and the rough-in valves behind the walls. So the compatibility question in Summerlin is really about which American Standard products you’ve specified and whether they’ll work with the plumbing layout, water pressure and code requirements of your build.
The American Standard lines that show up most in Summerlin addition plans:
- Cadet and Champion toilets – different rough-in distances (10″, 12″ and 14″), so the toilet’s rough-in has to match the plumbing stub-out in the plan, not the other way around.
- Moen and American Standard single-handle faucet valves – the rough-in valve model has to be confirmed before the wall goes up. A valve that’s discontinued mid-build is the single most common cause of a slow week on a Summerlin bathroom rough-in.
- American Standard tub and shower trim – trim kits are matched to a specific valve body. If the valve is American Standard, the trim must be American Standard or a manufacturer-approved match. Cross-brand mixing is where leaks start.
How to identify what you have: pull the model number off the fixture label (usually under the lid, on the back of the bowl, or on the valve body), match it to the spec sheet in your plan set, and confirm the plumbing submittal before the rough-in inspection. If the spec sheet is missing from the plan set, ask your contractor for the plumbing fixture schedule in writing.
OEM versus aftermarket for American Standard parts: OEM parts carry the manufacturer warranty and match the fixture exactly. Quality aftermarket equivalents (replacement cartridges, flappers, fill valves) are fine for repair work on a fixture, but for a new addition or ADU we spec OEM on everything that goes behind a wall. The difference in cost is small. The difference in a callback is not.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Home Additions & ADU Is Failing
- A rough-in valve won’t hold pressure at inspection. The valve body was installed with the wrong rough-in depth or a mismatched trim kit, so the plumbing inspection fails and the wall can’t close. In Summerlin, where water pressure can run higher than the fixture’s rated working pressure, a valve spec’d only for “residential standard” can fail its test on day one.
- The American Standard faucet drips or won’t shut off fully. Usually a failed cartridge or seat. On a new build this points to a cartridge that wasn’t matched to the valve body, or debris in the line from the rough-in.
- The toilet rocks or the flange sits too high. A 12″ rough-in toilet set on a 10″ stub-out, or a flange set too high for the finish floor. This is a measurement problem, not a product problem, and it’s caught before tile if someone checks.
- A spec change mid-build. The American Standard fixture you picked is backordered or discontinued, and the substitution changes the rough-in dimensions in the plan. This is the most common cause of a stalled addition in Summerlin.
- The permit set doesn’t match the plumbing plan. A fixture schedule that lists one valve and a plan that shows another. Clark County reviewers flag this, and the project waits on a resubmittal.
If more than one of these is happening at once, the problem is usually the plan set and the submittal process, not the fixtures themselves.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers break down in Summerlin. These are installed ranges, not parts prices, because the “part” on an addition is the plumbing rough-in and fixture package – not a standalone spring or valve you can swap in an hour.
| Project | Installed range | What drives the number |
|---|---|---|
| Home addition | $45,000 – $130,000 | Square footage, foundation and slab work, roof tie-in, plumbing and electrical rough-in, American Standard fixture package |
| ADU construction | $90,000 – $220,000 | Detached vs attached, utility trenching, separate meter, kitchen and bath fixture count, permit and inspection cycle |
| Garage conversion | $30,000 – $80,000 | Slab and insulation, plumbing run to the new bath, egress, American Standard fixtures |
The range moves on three things: how much plumbing is in the build, whether the ADU needs a separate utility service, and the fixture schedule. A single-bath addition sits near the low end. A full ADU with a kitchen, two baths and a laundry sits near the high end. The American Standard fixture package itself is a small percentage of the total; the labor and permit work is the bulk of it.
We give you a written price before any work starts, with a line-item scope. That price doesn’t move at the door. Every finished project is covered by the 365-Day Done Right Promise: if the work fails within a year of completion, we come back and correct it at no charge. We’re part of the Garrison Partners family and held to The Garrison Standard – the framework behind the written price and the written guarantee. We also work with KraftMaid, Cambria and Silestone on the cabinetry and surfaces side of the build.
DIY or Call Us?
Some things an owner can check safely. Verify the American Standard model number against the spec sheet. Confirm the rough-in distance on the toilet flange. Call American Standard directly to check whether a fixture is discontinued or backordered. Read the permit plan set and confirm the fixture schedule matches.
What we don’t recommend is DIY plumbing rough-in on an addition or ADU in Summerlin. Here’s the honest reason: rough-in is behind-the-wall work, and a leak or a failed inspection means the wall comes back out. The plumbing, gas and electrical work in an addition or ADU is code-governed and inspected, and a homeowner’s DIY rough-in usually fails inspection and costs more to correct than it saved. It’s also genuinely dangerous – gas lines and electrical rough-in especially. We strongly recommend a licensed contractor for anything that goes behind a wall.
If you’re pricing an addition or ADU in Summerlin and want a written number instead of a range, call (844) 588-0072 for a free estimate.
FAQs

American Standard fixtures typically last 10 to 20 years with normal use, and the cartridge inside a faucet is usually the first thing to wear out – often in 5 to 8 years. Summerlin’s water is hard enough to shorten that, so we spec cartridges with a replaceable element and write the replacement into the maintenance plan.
Yes, in most cases. A dripping American Standard faucet is usually a cartridge swap, and a running toilet is usually a flapper or fill valve – both can be replaced without tearing out the fixture. On a new addition or ADU, the fix depends on whether the problem is the fixture or the rough-in behind it, which is why we check the valve body before we quote a replacement. Call (844) 588-0072 to schedule an inspection.
The rough-in itself usually takes 2 to 4 days on a typical Summerlin addition, depending on fixture count and whether the ADU needs a new utility service. The inspection cycle adds time, and the plan review adds time – that’s real calendar, not shop talk. We give you the schedule in writing before we start.
We order through American Standard’s distributor network and match every part to the model number on your plan set. We don’t carry parts on a truck or stock them in a warehouse – we order what your build specifies and confirm the submittal before the rough-in. That’s the only way the label on the box matches the plan in the inspector’s hand. Call (844) 588-0072 for a written estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












