







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Bathroom Remodeling: The Summerlin Owner’s Guide
We install American Standard-compatible bathroom remodeling in Summerlin, and a full bathroom remodel typically runs $9,000 – $28,000 installed, with smaller scopes landing at $5,000 – $12,000. If you’re dealing with a failing toilet, a dripping American Standard faucet, or a tub that’s given up, most of those fixes fold into a scheduled remodel rather than a same-day emergency call – we’ll give you a written price before any work starts. Most Summerlin owners find out something’s wrong the same way: a toilet that runs for 30 seconds after every flush, water staining at the base of the bowl, or a shower valve that won’t hold temperature. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with American Standard.

Key Takeaways
- Installed American Standard-compatible bathroom remodels in Summerlin: $9,000 – $28,000.
- Small bathroom remodel: $5,000 – $12,000. Vanity install alone: $800 – $3,000.
- Every project gets a written price before tools come out, plus the 365-Day Done Right Promise.
- Live person answers the phone, 24/7 – not voicemail.
Which American Standard Models This Applies To

American Standard fixtures are common across Summerlin homes built through the 1990s and 2000s, particularly the Cadet and Champion toilet lines, the Colony and Princeton fixture families, and the Studio and Townsend tub and shower series. Identifying the right repair or replacement part starts with the stamp inside the tank lid or on the back of the bowl – a model number like 215AA or 2034 tells you exactly which fill valve, flapper, or flush tower fits. Handle styles and trip levers vary by series, and a Champion 4 flush tower is not interchangeable with a Cadet 3 flapper.
On the OEM-versus-aftermarket question, our position is straightforward: for flush valves and fill valves, OEM parts from American Standard are worth the modest premium because the tolerances are tight and aftermarket copies fail faster in Summerlin’s hard water. For seat hinges, supply lines, and escutcheon trim, a quality aftermarket equivalent is fine. We don’t carry parts on a truck – we source by model number so the right part shows up the first time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Bathroom Remodeling Is Failing
- The toilet runs after every flush. The flapper or flush tower seal has hardened and stopped sealing. Hard water in Summerlin accelerates this – mineral deposits on the rubber edge shorten seal life.
- Water pooling at the base of the bowl. A failed wax ring or a loose closet bolt lets water escape under the floor. Left alone, it rots the subfloor and the ceiling below.
- The shower or tub valve drips or won’t hold temperature. The cartridge or pressure-balance spool inside the valve body has worn. On American Standard Studio and TownSquare valves, this is usually a cartridge swap, not a whole-valve replacement.
- The tub surface is cracked or peeling. American Standard acrylic and Americast tubs can delaminate after years of scrubbing and heat cycling. A crack at the overflow or drain flange means replacement, not resurfacing.
- The vanity top is chipped or the sink bowl is loose. Faucet supply lines and drain assemblies under an American Standard sink are common leak points. Catching it early saves the cabinet.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the price picture in Summerlin, stated plainly. Every number below is a written line-item price before work starts.
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel (American Standard-compatible) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What drives the range: fixture grade, substrate condition when we open the wall, tile selection, and whether the rough-in needs to move. That last point matters most – relocating a drain or supply line in a Summerlin bathroom adds cost and requires a permit. What’s included on every job: written scope, pull the required permits, haul-away, and the 365-Day Done Right Promise. If the work fails within that year, we return and correct it at no charge.
DIY or Call Us?
Some checks are safe and worth doing yourself. Turn the water off at the angle stop, lift the tank lid, and look at the flapper seal – if it’s stiff, hard, or mineral-crusted, that’s your running toilet. Look under the sink with a flashlight for staining at the supply lines and drain. Those checks cost nothing and tell you whether you’re looking at a small fix or something bigger.
What we don’t recommend: pulling a toilet to reseat a wax ring without shutting off the water and knowing how to test the flange, or opening a valve body to swap a cartridge on a valve you can’t fully close – if the cartridge breaks inside, you now have an open water line. Water damage is the expensive part of a bathroom problem, not the part itself. If you’d rather not gamble on it, call (844) 588-0072 for a free estimate.
FAQs

Most American Standard toilets hold up 10 – 15 years in Summerlin before major parts need replacing. Our hard water speeds up wear on flappers, fill valves, and flush tower seals, so those internal parts often need swapping every 3 – 5 years even on a toilet that’s otherwise fine. The porcelain itself lasts far longer than the rubber inside it.
Yes, in most cases – a running or leaking American Standard toilet is usually a $30 – $80 part, installed for under $250. A dripping shower valve is typically a cartridge swap, not a valve replacement. We’ll tell you honestly if repair isn’t the right call. Call (844) 588-0072 and we’ll price it in writing.
A toilet or faucet swap is a short job – a couple of hours once the right part is on hand. A tub-to-shower conversion or full vanity replacement is a multi-day remodel depending on scope and tile. We schedule the work, not the surprise, and you’ll know the timeline before we start.
We identify your American Standard model from the stamp on the fixture, then source the exact OEM part by that model number. We don’t carry parts on a truck and we don’t guess from a photo. It’s the difference between the right part the first time and a second trip.
We also install KraftMaid, Cambria, and Silestone as part of a full bathroom scope, so if you’re replacing the vanity and counters alongside a fixture, those come from the same documented brand roster that carries manufacturer warranties.
Call (844) 588-0072 for a free estimate on your Summerlin bathroom – a real person answers, 24/7, and every price you hear is one we’ll put in writing before a single tool comes out.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












