







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Windows & Doors: The Summerlin Owner’s Guide
We install ActiveYards-compatible windows and doors across Summerlin, and a full window replacement here typically runs $4,500 – $15,000 for the home, with impact-rated installation at $8,000 – $25,000. A single failing unit – a fogged IGU, a door that won’t latch, a hinge that’s torn loose – is usually a part-and-labor repair, not a whole-house job. Owners in Summerlin usually find the failure the same way: a bedroom window that stays cloudy after the afternoon sun hits it, a patio door that drags on the track by July, or a lock that stops catching after a dry winter.

We’re an independent service provider. We’re not affiliated with ActiveYards, and we don’t claim to be. What we do is match the part to your actual model, quote a written price before any work starts, and back the install with the 365-Day Done Right Promise. Our technicians have up to 22 years of experience with vinyl window and door systems, and calls are answered by a live person 24/7.
Key Takeaways
- Most ActiveYards window and door failures in Summerlin come down to one part: a seal, a hinge, a lock, a roller, or a balance.
- Installed prices for Summerlin range from $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated glass.
- You get a written, itemized price before any tool comes out – no numbers that move at the door.
- The 365-Day Done Right Promise covers the work for a full year. If it fails inside that window, we return and correct it at no charge.
Which ActiveYards Models This Applies To

ActiveYards isn’t one window. It’s a family of vinyl product lines – single-hung, double-hung, slider, casement, fixed picture units, and sliding patio doors – sold through dealers and regional fabricators. The parts don’t cross lines. A sash balance from a double-hung won’t fit a casement, and a patio door roller set is sized to the panel weight, not the frame width.
Before we quote anything, we identify your unit three ways. First, the manufacturer label – usually on the top or side of the sash, sometimes inside the head jamb of a door. Second, the glass date stamp in the corner of the IGU, which tells us the glass package and age. Third, hard measurements: rough opening, visible glass, and sash thickness. The label is the fastest path, but plenty of Summerlin homes have labels painted over or sun-bleached white after years of west-facing exposure.
Here’s the OEM-versus-aftermarket decision, made for ActiveYards specifically. For glass units, we source to the exact IGU spec – Low-E coating, argon fill, spacer type – because a mismatched spacer is what causes the seal failure to come back. For hardware – locks, rollers, hinges, balances – a quality aftermarket equivalent is often the smarter call, especially on older ActiveYards lines where the OEM hardware has been superseded. We tell you which is which in the written quote, with the part spec listed by line, so nothing is guessed at.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Windows & Doors Is Failing
Summerlin’s climate is hard on vinyl and glass: dry air most of the year, temps that swing 40 degrees between morning and afternoon in spring and fall, and intense UV on any west- or south-facing unit. That combination shows up in predictable failures.
- Fog or condensation between the panes. The IGU seal has failed and moisture has entered the gas space. Once the desiccant is saturated, the fogging is permanent – no amount of cleaning fixes it. The glass unit has to be replaced.
- A patio door that drags or won’t slide smoothly. Worn rollers or a track packed with grit. In Summerlin we regularly see this on doors facing the pool deck, where dust and hard-water splash accelerate roller wear. Left alone, the rollers flat-spot and the panel starts to bind.
- A lock that won’t catch or a handle that feels loose. The mortise lock or multipoint mechanism has worn or slipped out of alignment. This is a security issue, not a cosmetic one – a door that won’t latch is a door that isn’t locked.
- Draft or heat gain at the frame edge. Weatherstripping or the perimeter seal has compressed and failed. You feel it as a hot draft in summer and a cold one in winter, and it shows up on the energy bill before it shows up on the wall.
- A sash that won’t stay up, or a hinge that’s pulled loose. A failed balance on a hung window, or stripped hinge screws on a casement. Both mean the operating hardware is past its service life.
One note on lifespan for Nevada: a standard dual-pane IGU realistically holds its seal 15 to 20 years in this climate, and a west-facing unit often goes sooner. Vinyl rollers and weatherstripping typically give you 10 to 15 years before they need attention. If your ActiveYards units are older than that, the failure you’re seeing isn’t a fluke – it’s the part reaching its service life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed prices for Summerlin, by scope:
- Window replacement (whole-home standard): $4,500 – $15,000
- Impact-rated window installation: $8,000 – $25,000
- Single failed IGU or hardware repair: quoted by the part, itemized in writing before work starts
What moves the range: the number of openings, glass package (standard dual-pane versus impact-rated), frame finish, and whether the rough opening needs any repair once the old unit comes out. A single part swap – a roller set, a lock, a balance – sits at the low end. A full-home replacement sits at the high end.

Every quote lists parts and labor by line. You see the part spec, the labor, and the total before any tool comes out. That’s The Garrison Standard in practice, and it’s not negotiable on our jobs. The 365-Day Done Right Promise covers the installation for a full year from completion – if a seal fails, a door drags, or a lock stops catching inside that window, we come back and correct it at no charge. If your project also touches cabinetry or counters, we handle KraftMaid, Cambria, and Silestone on the same written-price basis.
DIY or Call Us?
You can safely do a few things yourself. Check the manufacturer label for the model code. Measure the visible glass and the rough opening. Clean the door track with a vacuum and a stiff brush and see if the drag improves. Tighten a loose hinge screw with a screwdriver – if it won’t hold, the hole is stripped and that’s a repair, not a tightening.
Where DIY goes wrong on these units: glass. A failed IGU is a sealed assembly that has to be matched to the exact spec, and a poorly seated replacement fails again within a season – we’ve seen it on Summerlin homes more than once. Replacing a patio door panel is a two-person lift with real weight, and a dropped panel can crack the glass or bend the frame. Locks and multipoint hardware have to be aligned to the frame; a misaligned mechanism leaves the door unlatched and unsafe. And on impact-rated glass, the anchoring and sealant spec matters for the rating to hold – that’s not a homeowner job.
If you’re unsure which part failed, call (844) 588-0072. We’ll tell you what we think it is and whether it’s a repair or a replacement, and the estimate is free.
FAQs

Expect 15 to 20 years on the glass seal and 10 to 15 years on rollers, weatherstripping, and operating hardware in Summerlin’s climate, with west- and south-facing units on the shorter end. UV and the dry-then-hot swing are the main drivers. Call (844) 588-0072 for a free assessment of where your units stand.
Yes, often. A fogged IGU is replaced as a glass unit, not a whole window, and a dragging door usually needs rollers or a track, not a new door. If the frame is sound and the glass spec matches, the repair is the right call and the cheaper one. Call (844) 588-0072 and we’ll tell you which you’re facing.
A single glass unit or hardware repair is typically a same-day visit. A door panel or roller set is usually a few hours. Whole-home window replacement runs multiple days depending on the opening count – we put the schedule in the written quote so you know before we start. Call (844) 588-0072 to schedule.
By label, glass stamp, and measurement – not by guesswork. We match the IGU spec to the exact coating, fill, and spacer, and we tell you by line whether the hardware is OEM or a quality aftermarket equivalent. Every price is written before work starts. Call (844) 588-0072 for an exact quote – estimates are free.
If a Summerlin window or door has failed on you, call (844) 588-0072 for a free estimate. You’ll get a written price, a live person on the line, background-checked and uniformed technicians on the job, and the 365-Day Done Right Promise standing behind the work for a full year.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












