







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Summerlin Owner’s Guide
We install and repair ActiveYards driveways and paver systems in Summerlin, and most full paver driveway projects run $7,000 – $18,000 installed. ActiveYards hardscape systems aren’t a single “part” you swap like a hinge – they’re an interlocking system of paver units, edge restraint, and a compacted base, so a failure almost always traces back to one of those three layers. Summerlin owners usually notice it after a monsoon season: a sunken corner at the driveway apron, pavers rocking underfoot near the garage, or joint sand washing out toward the street. Call (844) 588-0072 and a live person answers, day or night, to set up a free written estimate.

Which ActiveYards Models This Applies To

ActiveYards paver profiles vary by collection and by the surface finish – some lines use a beveled edge, some a chamfered or tumbled face – and the profile has to match across your driveway so the joints line up and the panels interlock correctly. That’s the first compatibility gotcha Summerlin homeowners hit: ordering a replacement paver in the right color but the wrong profile, then watching the joint sand fail along the seam because the edges don’t seat against each other. The second is thickness. Most driveway-rated pavers are in the 2 3/8-inch range, while many walkway and patio units are thinner. Mismatching thickness on a driveway that sees vehicle loads is how you get a rocking paver six months later.
To identify your unit, pull a loose paver from an unobtrusive spot (a corner or an edge near the expansion joint) and measure length, width, and thickness with a tape. Photograph the top face and the side profile in daylight. That photo set is what a supplier needs to cross-reference the collection.
On the OEM-versus-aftermarket question: ActiveYards-branded replacement units are the cleanest match when the collection is still in production, and we source through documented supply channels so the spec is traceable. When a profile is discontinued, a quality aftermarket equivalent in the same thickness and a close face match is a reasonable path for repairs – but blend it into an area where color drift won’t be obvious, because a new unit against weathered pavers in Nevada sun will read slightly different for the first year.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Driveway & Pavers Is Failing
Five symptoms we see regularly on Summerlin driveways, and what’s actually underneath each one:
- Pavers rocking or shifting underfoot. The base layer has settled or lost compaction, usually from water getting under the edge and washing out fines. A rocking paver is a base problem, not a paver problem.
- Joint sand washing out after rain. Either the joint sand was never stabilized or the edge restraint has loosened, letting the whole system breathe and shed sand. If you’re re-sanding every spring, look at the edge first.
- Sinking at the driveway apron or garage transition. This is the highest-traffic, highest-water zone on any Summerlin driveway. Poor drainage pitch sends runoff against the base instead of away from it.
- Efflorescence – white chalky film on the surface. Moisture moving through the paver carries salts to the face. It’s cosmetic on its own, but persistent efflorescence points to a water-management issue in the base or drainage.
- Cracked or spalled paver faces. In Summerlin’s heat cycle, a unit with a weak base under it flexes and cracks. Spalling on the face usually means the paver is taking load it wasn’t seated to carry.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Summerlin, quoted as a written range before any work starts:
| Scope | Installed price range |
|---|---|
| Full paver driveway installation | $7,000 – $18,000 |
| Driveway replacement (tear-out and rebuild) | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway (comparison scope) | $4,500 – $12,000 |
What drives the range: square footage, whether the existing base can be salvaged or has to be excavated and rebuilt, edge restraint and drainage work, and whether the paver profile is a current collection or a discontinued one requiring sourcing. Our written quote itemizes paver units, base material, edge restraint, labor, and disposal – no numbers that move at the door. Every completed hardscape project carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
A few things are safe for a homeowner to check. Pull one loose paver and measure and photograph it. Sweep joint sand back in and note whether it stays. Watch where water pools after a storm. Those observations help us quote accurately and they cost you nothing.
What goes wrong with DIY on pavers is the base. Rebuilding a driveway section means excavating to the right depth, compacting in lifts, setting the correct slope away from the garage, and locking the edge restraint. Skip any one of those and the new surface fails inside a season – and in Summerlin, where summer surface temperatures climb high enough to stress a poorly seated unit, the failure shows up fast. There’s no high-tension or electrical danger here, just a lot of heavy material and a base spec that’s easy to get wrong. If you want it done once, call (844) 588-0072 for a free written estimate.
FAQs

A properly installed paver driveway should hold 25 to 30 years or more, but the pavers themselves aren’t the weak point – the base and edge restraint are. In Summerlin’s heat and monsoon pattern, a driveway with a marginal base can show rocking and joint-sand loss inside 3 to 5 years. Call (844) 588-0072 for an assessment; estimates are free and written.
Often yes. If the failure is localized – one sunken section, a loosened edge, washed-out joints – we can lift the affected units, re-compact the base, and relay them, which costs far less than the $7,000 – $18,000 full-install range. A whole-driveway base failure is the case that calls for replacement. We’ll tell you which one you have in writing before any work starts.
A localized repair is typically a one- to two-day job. A full driveway replacement usually runs several days depending on square footage, base excavation, and weather. We give you the schedule in the written scope so you know what to expect, and we leave the site clean with the written guarantee in your hand.
We work from your measurements and photos to match the ActiveYards collection and profile through documented supply channels, so the unit spec is traceable and backed by manufacturer specs. If your profile is discontinued, we’ll present an aftermarket equivalent in the same thickness and explain the color-blend tradeoff before you decide. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with ActiveYards. We also work with KraftMaid, Cambria, and Silestone on interior projects. Call (844) 588-0072 to start with a free estimate.
Whether it’s a rocking corner or a full driveway rebuild, the next step is the same: a free, written, itemized estimate from a crew held to The Garrison Standard, with background-checked, uniformed technicians and a live person on the phone around the clock. Call Bradford Remodeling Co Summerlin at (844) 588-0072 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












