







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Home Additions & ADU: The Summerlin Owner’s Guide
We build and finish Mighty Buildings-compatible home additions and ADUs in Summerlin, and installed projects typically run $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, depending on footprint, foundation work, and finish level. This is planned construction, not an emergency call, so we schedule an assessment and put a written price in your hands before anything starts. Most Summerlin owners come to us the same way: a Mighty Buildings panel or module that was permitted and set years ago starts showing a problem at a seam, around a penetration, or at the roof-to-wall junction, and the original installer is gone. What follows is how we identify what you’re actually dealing with, what it costs, and where the real risks sit.

Which Mighty Buildings Models This Applies To

Mighty Buildings built its reputation on prefabricated and 3D-printed panel systems, and the panel geometry, connection details, and finish schedules differ by production line and by the year a unit was fabricated. That matters because “Mighty Buildings addition” isn’t one specification; a 2020-era panel set and a later production run can use different connection hardware and different substrate thicknesses. Before we quote, we read the panel identification on the unit, measure the exposed substrate and connection spacing, and cross-check against the as-built drawings if you have them. If the drawings are missing, the physical measurements are what we go on.
Then comes the OEM-versus-equivalent decision. Factory-original connection hardware and finish components are the safest match for a Mighty Buildings assembly, and when they’re available we specify them. When they aren’t, we source documented equivalents that meet or exceed the original spec and put the substitution in writing so it’s traceable. We don’t carry parts and we don’t stock Mighty Buildings components on a truck; every component for your Summerlin project is matched to your unit and ordered for the job. One compatibility gotcha worth knowing: exterior finish components are often matched to a specific panel series, and a component spec’d for a different series can fit loosely or trap moisture at the seam. We’re an independent service provider and not affiliated with Mighty Buildings.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Home Additions & ADU Is Failing
- Staining or soft drywall at panel seams. Water is getting past a connection detail or a sealant that has aged out, and the seam is where it shows first.
- Bubbling or lifting exterior finish near penetrations. Window and door penetrations are the usual weak point; failed flashing or sealant lets Summerlin’s wind-driven rain in behind the finish.
- Interior temperature swings or higher cooling bills than the rest of the house. A compromised panel joint or insulation gap in the assembly is letting heat move where it shouldn’t. Summerlin’s summer heat makes this show up fast.
- Visible cracking at the roof-to-wall junction or at module connections. Movement at a connection point can open a path for water and air, and it’s the sign we take most seriously.
- Musty smell or elevated interior humidity. Moisture is trapped inside the assembly rather than draining out, which is a slow problem that gets expensive if it’s ignored.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Summerlin, a Mighty Buildings-compatible home addition runs $45,000 – $130,000, and a full ADU build runs $90,000 – $220,000. A garage conversion, which is the most common smaller-scope path to an ADU here, lands at $30,000 – $80,000. What drives the range: the footprint and foundation, how much of the existing panel assembly has to be opened and re-detailed, the finish level you choose, and whether permits and inspections are straightforward. We separate the parts-and-labor line items so you can see what the components cost versus the installation. The number we give you is written before any work starts, and it doesn’t move at the door. Every finished project carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge.
DIY or Call Us?
What you can safely do yourself is inspect and document. Photograph any staining or seam issue, note where the finish is lifting, and check that your downspouts and grading are moving water away from the wall. That evidence helps us scope the job accurately. What you shouldn’t do is open up a panel assembly or try to re-detail a connection point on your own. Opening the assembly the wrong way can let moisture in where it wasn’t before, and re-sealing a panel seam without knowing the connection spec can hide a water path rather than fix it. Panel assemblies and exterior wall systems are best handed to a trained professional. If you’ve noticed any of the signs above, calling us for a free assessment is the sensible next step. We answer the phone with a live person, 24/7, at (844) 588-0072, and we’ll tell you plainly whether it’s a repair or a replacement.

FAQs

With proper detailing and maintenance, a well-built Mighty Buildings assembly can serve a home for decades. The reality in Summerlin’s climate is that the sealants, flashings, and finish coatings around penetrations and seams are the parts that age first, typically needing attention long before the panels themselves fail. Call (844) 588-0072 for a written assessment specific to your unit.
Often yes, especially if the problem is isolated to a seam, a penetration, or a localized finish section. We diagnose first and quote the repair before recommending any replacement. If a full replacement isn’t justified, we won’t push one. Call (844) 588-0072 to schedule the assessment.
A localized repair can be completed in a day or two, while a full addition or ADU is a multi-week project that depends on permits, foundation work, and finish schedule. We put an expected timeline in the written scope before work begins. Call (844) 588-0072 and we’ll walk you through what your project realistically looks like.
We match components to your specific Mighty Buildings model by reading the panel identification and measuring the connection spec, then order OEM where available or a documented equivalent in writing. We don’t claim to stock Mighty Buildings parts. Call (844) 588-0072 to start the matching process.
When you’re ready to get a straight answer on your Mighty Buildings addition or ADU, call (844) 588-0072 for a free estimate. We put every price and every guarantee term in writing before a single tool comes out, and we back it with the 365-Day Done Right Promise. Our technicians have up to 22 years of experience, and we also work with KraftMaid, Cambria, and Silestone on the finish side of these projects.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












