







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Driveway & Pavers: The Summerlin Owner’s Guide
If you own a Dvele home in Summerlin and your driveway or paver hardscape is failing, we install Dvele-compatible driveway and paver systems here in Summerlin, with typical installed paver driveway work running $7,000 – $18,000 and concrete replacement $4,500 – $12,000. We’re an independent service provider, not affiliated with Dvele, and we give you a written price before any work starts. Most Summerlin owners first notice the problem as sunken pavers near the garage apron, sand joints washing out after monsoon season, or hairline cracks spreading across the slab within a year of the original pour.

Which Dvele Models This Applies To

Dvele builds in specific model lines, and the driveway and paver spec that ships with your home depends on which series and elevation package you ordered. The finish schedule on your build documents, the paver manufacturer stamp visible on the edge of an individual unit, and a simple measurement of the driveway width and slope will tell us which system and substrate we’re matching. Dvele’s standard driveways are engineered around a compacted sub-base sized to the local soil and slope; the paver units themselves typically come from a known regional supplier, so the brand and series are identifiable even when the original paperwork is gone.
On Summerlin lots specifically, expansive caliche-prone soil and the grade against the garage slab matter more than the paver color. We identify the exact part number, series, and joint system before quoting, because a mismatched paver series will crack at the bedding layer within two summers. On OEM vs. aftermarket, an OEM Dvele-spec paver or slab replacement matches the original grade and drainage profile; a quality aftermarket equivalent is fine when the base has failed and we’re rebuilding it. We document the exact product spec in writing, so there’s no guessing after the fact.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Driveway & Pavers Is Failing
Failure in Summerlin hardscape rarely happens all at once. It shows up as a set of symptoms, each pointing to a specific cause underneath.
- Sunken or rocking pavers near the garage apron. This is the joint layer and bedding sand settling over compacted base that wasn’t deep enough for the soil. It’s the most common failure we see and it gets worse with every rainy season.
- Sand joints washing out after storms. In Summerlin, monsoon rain runs fast across a low-slope driveway. If the joint sand is gone, water is getting under the pavers and eroding the bedding layer, not just looking untidy.
- Hairline cracks spreading across concrete. Cracks wider than a credit card in a Dvele driveway slab usually mean the sub-base moved, or the control joints were cut too shallow for the desert temperature swing between a 110°F summer and a cold winter night.
- Chipping or spalling on the paver surface. Freeze-thaw cycles in the higher Summerlin elevations plus salt-and-sun exposure will spall a paver that wasn’t rated for the local climate range.
- Water pooling against the garage or foundation. This means the driveway slope has degraded and drainage now runs back toward the house. It’s the one symptom that can quietly do damage to the structure, not just the hardscape.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Dvele-compatible driveway and paver work runs in Summerlin, installed. Every number below is a real range, not a call-for-a-quote placeholder.
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement: $5,000 – $14,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
What drives the range: total square footage, how deep the existing base has failed, the specific paver series or slab spec, and whether drainage correction is needed. Parts and labor are quoted together as a single written price, itemized line by line, before work begins. The 365-Day Done Right Promise covers every completed project: if the installed work fails within a full year, we come back and correct it at no charge. That’s the guarantee in writing, for a full 12 months.
DIY or Call Us?
An owner can safely check a few things without touching a tool: photograph cracks against a tape measure, note where water pools after rain, and check the paver joint sand level along the apron. If the base has failed under a driveway slab or a paver field, that’s not a DIY fix. Lifting and resetting a paver run over a corrected base is heavy physical work with concrete compaction, and doing it wrong means a repeat failure within a season, which is a bigger problem than the one you started with. This is a job for trained hands on the compaction equipment. The 365-Day Done Right Promise exists precisely so you’re not carrying that risk.
We work from a written price, we do not leave a job site until it’s clean and squared away, and the signed guarantee goes in your hand at close. Call (844) 588-0072 for a free estimate in Summerlin.
FAQs

How long does a Dvele paver driveway or concrete slab last in Summerlin? A properly installed Dvele-spec paver driveway should hold 20 – 30 years before the base needs real attention; a concrete slab in Summerlin’s climate typically runs 15 – 25 years with correct control joints and drainage. Lifespan here depends more on the sub-base than the surface material. Call (844) 588-0072 for an exact quote on your driveway.
Can the driveway be repaired instead of replaced? Often yes. Sunken pavers can be lifted and reset, joint sand can be re-sanded, and isolated cracks can be corrected without tearing out the whole driveway. Repairs make sense when the base is sound underneath; if the base has failed, a patch will just fail again next season. We check the base first, then quote honestly. Call (844) 588-0072 for a free estimate.
How long does the swap take? A driveway sealing or joint re-sand runs a single day. A full paver driveway replacement typically takes 3 – 5 working days once materials are on site, depending on square footage and base condition. Concrete replacement runs 2 – 4 days plus cure time. We write the timeline into the scope before work starts.
How do you source the part? We match the exact paver series, slab spec, or joint system to your Dvele model and document the product specification in writing so the material is traceable to the manufacturer. We don’t carry parts on a truck; we source to your specific spec, which is how we avoid a mismatched series failing at the bedding layer.
We also service KraftMaid, Cambria, and Silestone product lines for Summerlin homeowners alongside the driveway and paver work. Call (844) 588-0072 for a free written estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












